Vogel Germany Products | DesertCart

Vogel Germany

Discover a wide selection of high-quality vogel germany products.

Shop by brand

Limit Plug Gauge DIN 7162 and 7164, hard chromed, Tolerance H7, ø 12.0 mm

Limit Plug Gauge DIN 7162 and 7164, hard chromed, Tolerance H7, ø 12.0 mm

Spare Carbide Point cranked for 334612

Spare Carbide Point cranked for 334612

4-step Calibration Block 1, 3, 5, 10mm, 80x20 mm, in wooden box

4-step Calibration Block 1, 3, 5, 10mm, 80x20 mm, in wooden box

Probe 7 MHz, ø 6 mm for thin pipe wall or small curve surfaces, etc.

Probe 7 MHz, ø 6 mm for thin pipe wall or small curve surfaces, etc.

Steel Rule, 150x18x0,5mm inox,satin,grad. inch-mm DIN2768m, in foil

Steel Rule, 150x18x0,5mm inox,satin,grad. inch-mm DIN2768m, in foil

Vogel 414105 - Juego 13 galgas Laton 100 mm (414005)

Vogel 414105 - Juego 13 galgas Laton 100 mm (414005)

Magnetic Clamping Vee Block 80x70x95mm, adhesion 25 KG, for ø 6-30 mm, acc. ±0,05 mm, finely ground, in carton box

Magnetic Clamping Vee Block 80x70x95mm, adhesion 25 KG, for ø 6-30 mm, acc. ±0,05 mm, finely ground, in carton box

Magnetic Clamping Vee Block 70x55x75mm, adhesion 50 KG, for ø 6-30 mm, flat basement finely ground, in a paper box

Magnetic Clamping Vee Block 70x55x75mm, adhesion 50 KG, for ø 6-30 mm, flat basement finely ground, in a paper box

Watchmaker's Magnifier, x-10 ø 25 mm, with air hole, in a box

Watchmaker's Magnifier, x-10 ø 25 mm, with air hole, in a box

Inside Micrometer Set 100-3000mm carbide tipped measuring faces, extensions ø17 mm,50/100/2x200, extensions ø32 mm,500/2x1000, max.error:30µm,in wooden box

Inside Micrometer Set 100-3000mm carbide tipped measuring faces, extensions ø17 mm,50/100/2x200, extensions ø32 mm,500/2x1000, max.error:30µm,in wooden box

Prec. Steel Rule, 150x13x0,5mm inox, acc. to BS 4372:1968, etched grad. 1. side ½ mm-mm 2. 16/32/64 + 10/20/50-100 ths packed in foil

Prec. Steel Rule, 150x13x0,5mm inox, acc. to BS 4372:1968, etched grad. 1. side ½ mm-mm 2. 16/32/64 + 10/20/50-100 ths packed in foil

Steel Rule, 1000x30x1,0 mm Stainless,Satin,Grad.mm/mm Back with Conversion Table

Steel Rule, 1000x30x1,0 mm Stainless,Satin,Grad.mm/mm Back with Conversion Table

Steel Rule 1000x18x0,5 mm, stainless spring steel, Zero-point in the middle, top and bottom 1/1 mm graduation, workshop grade

Steel Rule 1000x18x0,5 mm, stainless spring steel, Zero-point in the middle, top and bottom 1/1 mm graduation, workshop grade

Micrometer, 175 - 200 mm grey lacquered frame, carbide tipped, 0,01 mm, DIN 863, in a wooden box

Micrometer, 175 - 200 mm grey lacquered frame, carbide tipped, 0,01 mm, DIN 863, in a wooden box

Digital Protractor, IP65 mr 4x90°/0-360°, Torpedo, reading 0,05°, On/Off/Ref, Data-Hold, V-Aluminiumframe,operation manual, (2X 1.5V AAA) Alkali Mangan battery IATA DGR A123"Not Restricted"

Digital Protractor, IP65 mr 4x90°/0-360°, Torpedo, reading 0,05°, On/Off/Ref, Data-Hold, V-Aluminiumframe,operation manual, (2X 1.5V AAA) Alkali Mangan battery IATA DGR A123"Not Restricted"

Dial Indicator, 0-10x0,01 mm with magnetic backside, ø 58mm DIN 878, in a box

Dial Indicator, 0-10x0,01 mm with magnetic backside, ø 58mm DIN 878, in a box

LCD Digi Workshop Caliper 600x0,01mm/jaw length 150 mm, with tips, with fine adjustm, with ABS- and Pre-Set-Mode, battery 3V (CR2032), CE, operation manual, plastic box

LCD Digi Workshop Caliper 600x0,01mm/jaw length 150 mm, with tips, with fine adjustm, with ABS- and Pre-Set-Mode, battery 3V (CR2032), CE, operation manual, plastic box

Vogel A141510191V455050 455050

Vogel A141510191V455050 455050

Special Micrometer 75-100 mm for meas. of narrow grooves, read. 0,01 mm, im wooden box

Special Micrometer 75-100 mm for meas. of narrow grooves, read. 0,01 mm, im wooden box

Steel Rule, DIN 866/B, INOX 1000x30x6mm, mm-Graduation, no safty Ends, in foil

Steel Rule, DIN 866/B, INOX 1000x30x6mm, mm-Graduation, no safty Ends, in foil