Broan-NuTone BCSD130WW Glacier 30-inch Under-Cabinet 4-Way Convertible Range Hood with 2-Speed Exhaust Fan and Light, 300 Max Blower CFM, White

Very bright, looks sharp, runs quietly and it extends out nicely without being a head clunker, which means it'll suck most of the steam from a big pot cooking on the front row. Not all but most. It has options for vented duct off the top and at the rear thru a wall or non-venting. It says One person can install it. I'm a 66yr gal, and I installed it by myself. First, attach the light bulbs (order separately) and wired a power cord (ditto). Remove whatever else you don't need, per instructions. I fought an old solid wood cupboard, couldn't use bolts & nuts cuz it had 2 solid bases for some reason. So, I used a paper bag as a map, drill the hole for the cord and only half drilled (4) 1" screws to the base, in their final spots. Then, lifted up the unit, wormed the power cord up to the base cabinet and then slid the unit onto the 4 screws. And then screwed them up tight. Order, if applicable: 1. Appropriate bolts & nuts. Or screws. It didn't come with it. Does have 2 temp 'sliding' bolts but didn't do me any good. I screwed it on, using the screws as supports before tightening. 2. Light bulbs (Philips 120v GU10 base, 50w 4wLEDs) I got the pack of 3, it came with a suction cup to help screw & twist the bulbs in place, or out, you'll need it!). 3. Power cord plug (open wiring at the other end, standard) if you're connected to an outlet. 4. Pair of non-duct filters (as I'm nonDucting, you do you) Part No 97020466, 2pk. The unit comes with pair of mesh filters. However they are for ducted vents. So, I use both! I slid my slightly smaller non-duct right on top of the unit mesh filters and closed it up. Final thought, check your gap from oven top to vent bottom - recommendation is 26" minimum and no more than 32" I believe? Mine's at 30". Perfect for my large steamy canning pots, light frying, and all around house cooking. Mine's all white, white oven, white cabinets. Love it.

Great investment with a good price-value. The over-range vent fan/lighting I had before was very outdated (and loud) so I opted to replace it with something a little more modern to address the look, and quiet for my sanity. This over the range hood was well within budget and offered the updated look I was going for. It was very easy to install and the dimensions advertised with accurate. While I did not use the bracket system that came with the product, and had somewhat clear directionz, I did utilize the four holes that were pre-fabricated. They are holding the vent up well and due to its light-weight build, I am not worried about it falling or posing as a hazard if I bump into it (for whatever reason) or if there is an earthquake. Construction: As I mentioned, the internal components seem to be of lightweight construction, probably aluminum as it is very light. Be careful when you move it around during installation and cautious not to bang into anything with it, like the corner of a cabinet, table or coutertop because I am sure the thing will dent easily. Perhaps not the most durable in this sense, however, it is not build to be man-handled or even touched much on that note, so with that being said, once it is up, it looks great! Wiring: I hard wired this myself using the conduit that was in place for the previous vent. I am pretty handy with stuff around the house, but very intermediate with the scary stuff such as gas & electrical... regardless, I gloved up, and got to it. Black to black, white to white, ground or bare wire to provided grounding screws. Be advised, while I did not go through the "whole-9" which I 100% advise you to do, including shutting the power to your house then TESTING that it is off using a digital multimeter, I am still alive, breathing, and writing this review with all ten fingers. I have done several electrical jobs around my old house (late 70's) such as socket replacement etc and felt comfortable with this task. The unit did not come with the two halogen bulbs which would have been nice, but they were an easy buy that I made at the local hardware store. I waited for the unit to arrive rather than ordering them off Amazon to ensure they fit property and were the correct specs. These too were easy to install. Overall this was a great buy. Good, clean look, affordable, and easy to install. Specs and dimensions were true, the fan is so quiet I couldn't even tell it was on, and the lights provide great countertop visibility. Would highly recommend for someone looking to update the look of their kitchen.

The fan is louder than we expected when on high. We were pleasantly surprised that it was equipped with light bulbs and that the filters have a nice light blue metallic trim. We followed the exact measurements, but the EZ brackets were hard to hang it from so we removed them. We instead used an adjustable spring loaded shower curtain rod to hold up one side while my wife held up the other side as I quickly drilled pilot holes and drove in the wood screws. Our 42-inch model weighed about 25 pounds, but it was unwieldy for one person to hold it up while leaning over our range. But all's well that ends well. It looks nice, the lights are very bright, and it's not very noisy when the fan is on low.

Overall a well made, clean & simple design. Fan is very quiet on the low setting, and for those smokey dishes the high setting ventilates very well. The stainless steel is of good quality and well constructed. Comes with both round and rectangular outlets for the fan ducting, attachment points for screws are in the right place, and wiring is ready for easy connection; it took me about an hour to install, and although I am a contractor, it shouldn't be too much of a challenge for someone who is mechanically inclined. Only fly in the soup is that it does NOT come with bulbs. I was able to find the right type at my local lighting store and the lighting over the stove top is absolutely fantastic, but you could save yourself some aggravation and buy them here.

So many range hoods have a manufacturer's nameplate, but this one is nice and plain. Even the light and fan switches are under the hood, but super easy to use without having to bend over. The fan is powerful and quieter than our previous hood. Installation was simple. The LED lights are nice and bright. I like the way it extends out about 2.5" farther than our previous hood so the front burners are covered better. All in all, we are very pleased with both the look and functionality of this range hood!

Very happy with my fan, easy to install, good quality, quiet and efficient!

Installed myself, was very easy and works amazing. Fan sucks everything up and outta my kitchen very nicely on highest speed.

I like the overall look , quality & quietness of operation + does convert to non-vented install. IMO the grease screens are a tad flimsy . Charcoal filters for non-vented install are not included and a three prong wire kit is sold separately.

C’est exactement ce que je voulais Très silencieuse et avec 2 led GU-10 très clair aussi

Sturdy, easy to install, fan is strong, lights are well placed, satisfied !