Cooler Master i30 CPU Cooler - 92mm Low Noise Cooling Fan & Heatsink (RH-I30-26FK-R1)- for Intel Socket LGA 1150/1151 / 1155/1156 (i30)

Perfect Replacement for my older one. The fan is bigger than my last one, so the cooling is better. It was powered right from the motherboard with no problem. The Preinstalled thermal paste was nice too. It provides the perfect coverage for cooling. It is basic black with no RGB so perfect for my build. It was cheap and delivered fast. Great option

Works perfectly, and also screwed into the existing bolt holes for the fan I was replacing, so it's a standard-sized bolt. The "other side of the motherboard" mounting hardware is supplied, but as I say, I didn't need it (and, more importantly, didn't need to remove the motherboard to install it, either).

I bought this cooler to use on an Intel Pentium 10th gen CPU. For anyone wondering, this cooler is compatible with the LGA 1200 socket. The quality of the cooler is surprising for the price. I see some reviews calling the metal material "cheap" and I do not agree. The metal material is more than acceptable and it is not flimsy at all. I did a stress test with my CPU at 100% load for 20 minutes and the CPU did not surpass 35c. The CPU sits idle between 25-28c. The stress test readings are exceptional. I do have great air flow in my case though, with 3 high performance Corsair fans. I did wipe off the pre-applied thermal paste and replaced it with Noctua thermal paste. I was able to perform the same stress test with the stock paste. The thermals were 10c higher with the stock paste. 35c idle and 45c under full load. I would definitely recommend removing the stock paste and using something better. I cannot speak to the performance of this cooler on a higher end CPU like a Core i7. However, for lower performance CPUs, this is a great cooler.

Much quieter than stock cooler, and that's why I bought it.. Contact area for cpu is quite small, but temperatures seem fine. Requires bottom plate installation.

Excellent. EASY to install. And it does include thermal paste.

It has a low surface area going on top of the gpu and causes temperatures to get very high when under heavy loads.

Was easy to install and my CPU temperatures are looking good!

Easy to install. Came with paste. Simple as swapping them out and lowered the temps by like 15 degrees Celsius.

منتج مابي اقوله ان سيء بس بالمرة ماينفع للمعالجات المتوسطة لان حرارتهم ترتفع بقوه المروحة ماتقدر تتحمل المعالج ابرد درجة توصلها ٦٠ بدون ماتشغل شي!! اذ شغلت لعبة او برنامج ثقيل ع المعالج طبيعي تشوف الحرارة ف التسعينات وحيل طبيعي ١٠٠ لاتخاف

It was simple and easy to install. The temps are under 80 degree celsius under load. But I am suspecting that it could be lower with a better thermal paste. Which is what I am considering to change in the future

Works well, easily installed

Muito bem embalado

This thing is super cool. I don't have a full on gaming system. It's virtually a web browsing, Netflix watching, YouTube viewing machine with a bit of PIZZAZZ!! The fan and heatsink work just fine! The heatsink is twice the size if the original in my acer aspire xc-780. Fits like a glove! I've had an uptime of 236h since installing the fan and heatsink. I had to turn it off and on constantly with the original fan and heatsink. It's extremely quiet! Great bang for buck!!! 🔆🔆🔆🔆🔆