---
product_id: 13037567
title: "Recessed D-Ring 6,000 lb. Cap. Tiedown Anchors w/Backing Plate - 8 Pack"
brand: "mackie ent inc"
price: "₨47206"
currency: LKR
in_stock: true
reviews_count: 9
url: https://www.desertcart.lk/products/13037567-recessed-d-ring-6-000-lb-cap-tiedown-anchors-w
store_origin: LK
region: Sri Lanka
---

# Recessed D-Ring 6,000 lb. Cap. Tiedown Anchors w/Backing Plate - 8 Pack

**Brand:** mackie ent inc
**Price:** ₨47206
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** Recessed D-Ring 6,000 lb. Cap. Tiedown Anchors w/Backing Plate - 8 Pack by mackie ent inc
- **How much does it cost?** ₨47206 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.lk](https://www.desertcart.lk/products/13037567-recessed-d-ring-6-000-lb-cap-tiedown-anchors-w)

## Best For

- mackie ent inc enthusiasts

## Why This Product

- Trusted mackie ent inc brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

This tie down attachment has a 6,000 lb. capacity* vertical pull weight rating. To install this attachment requires routing, or cutting a hole in the floor. This recessed d-ring has square holes punched for receiving carriage bolts, providing a smooth and relatively "trip free" surface. The steel attachment is zinc coated to inhibit corrosion. When in use the ring portion raises for application and lies down when not in use, thus creating a flush surface. This tie down attachment is plenty strong and is able to receive multiple tie-down straps simultaneously. To obtain maximum strength it is recommended to install these d-rings with bolts, lock nuts, and fender washers. For installation purposes it is easiest to cut a template and then transfer to the desired location. * RATED CAPACITY: Also known as "assembly capacity" or "break strength" is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. ***WORKING LOAD LIMIT: The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity

## Features

- About this item
- 8 sets of D-rings and backing plates. Both components are zinc coated to inhibit corrosion.     Each D-ring has a 6,000 lb straight pull capacity. For Rated Capacity Description - see below.     Instructions included. D-ring SPECIFICATIONS: See diagram in the photo gallery.     BACKING PLATE is used for support under the floor preventing the bolts from pulling through.     INSTALLATION - these D-rings require routing, or cutting a hole in the floor. More details below.    ›See more product details

## Images

![Recessed D-Ring 6,000 lb. Cap. Tiedown Anchors w/Backing Plate - 8 Pack - Image 1](https://m.media-amazon.com/images/I/61TBk9yFzTL.jpg)
![Recessed D-Ring 6,000 lb. Cap. Tiedown Anchors w/Backing Plate - 8 Pack - Image 2](https://m.media-amazon.com/images/I/61vKEWmw0LL.jpg)
![Recessed D-Ring 6,000 lb. Cap. Tiedown Anchors w/Backing Plate - 8 Pack - Image 3](https://m.media-amazon.com/images/I/713rnHuF0KL.jpg)
![Recessed D-Ring 6,000 lb. Cap. Tiedown Anchors w/Backing Plate - 8 Pack - Image 4](https://m.media-amazon.com/images/I/61GacnXkJcL.jpg)
![Recessed D-Ring 6,000 lb. Cap. Tiedown Anchors w/Backing Plate - 8 Pack - Image 5](https://m.media-amazon.com/images/I/41eIuQ+AUOL.jpg)

## Available Options

This product comes in different **Size** options.

## Customer Reviews

### ⭐⭐⭐⭐⭐ 







  
  
    Very Nice Product
  

*by H***K on Reviewed in the United States on September 27, 2015*

Really nice, heavy duty D-rings.  I purchased the 4 pack and later ordered a 2 pack.  Installation is much easier with two people, where one can work above the floor and the other below.  With my son and I working as a team, it took less than 15 minutes to install each one.  We used a different method to install them, rather than the instructions.  You will definitely appreciate the backing plates, as there is minimal material between where the large hole is cut (you will need a large hole saw and good size 1/2 drill) and the mounting bolt holes are drilled.  I used 3/8" carriage bolts, 1 3/4" long to attach to the 3/4" plywood floor of my utility trailer.

### ⭐⭐⭐⭐⭐ 







  
  
    I was very pleased with the quick shipping
  

*by J***H on Reviewed in the United States on July 25, 2014*

The tie downs arrived in short order. I was very pleased with the quick shipping, packing and overall quality of the tie downs. I mounted them in my utility trailer. I made a template from 3/4" wood stock and drilled a 3 1/2" hole with a hole saw and drill press. The template butted up against the bottom rail of the utility trailer. I used a straight cut router bit 1/2" wide with a flush bearing at the top and set 1" deep; however, I made two passes; first pass at 1/2 inch and the second pass at 1". I located the template with the template hole centered and template butted up against the bottom rail of the trailer. I used a staple gun with 2" staples and tacked the template in place. It held very well and easy to pop out and move to the next location. I drilled a 1" deep starter hole for the router bit with a 3/4" forstner bit flush against the inside edge of the template hole. I set the router bit to 1/2" depth and dropped it into the starter hole with bearing flush against the edge of the template and ran around the outside edge cutting the perimeter.  Then I nibbled away at the remainder and slowly cut out the interior of the recessed hole. I lowered the bit to 1" for the second pass doing the same. My son got a kick out of holding the vacuum hose for the dust collector sucking up the debris as I routed. I drilled a quarter inch hole in the middle of the cut out through the remainder of the wood floor and used a counter sink bit to make a funnel shape. This is for drainage should water or moisture get between the bottom of the tie down and the cut out. I sealed the wood, let it dry for a day, then drilled my bolt holes and used clear silicone to seal the tie down and bolts to keep water from penetrating beneath the tie down, and dropped in the bolts and tightened them up. I used 3/8" x 2 1/2"  carriage bolts, washers, lock washers and nuts of course. The mounting of the tie downs went perfectly and they give me significant utility. The most important thing to me though is the fast shipping and excellent packing of the product from Mackie Ent Inc (I bought four tie downs with backing plates). As a footnote, I found tie downs at Home Depot. The Home Depot tie downs were half the capacity and cost twice as much with no backing plates. Mackie Ent Inc is offering excellent value and excellent customer service.

### ⭐⭐⭐⭐⭐ 







  
  
    Strong setup for the money
  

*by D***E on Reviewed in the United States on February 9, 2021*

The real reason I purchased these,  is the metal plate that goes under the floor of trailer.This combination of strong d-ring and steel plate to sandwich between floor is as good as it gets for the money.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.lk/products/13037567-recessed-d-ring-6-000-lb-cap-tiedown-anchors-w](https://www.desertcart.lk/products/13037567-recessed-d-ring-6-000-lb-cap-tiedown-anchors-w)

---

*Product available on Desertcart Sri Lanka*
*Store origin: LK*
*Last updated: 2026-02-15*