Chesbung 6 Pack V Shape Led Aluminum Channel for LED Strips, 1Meter/3.3ft Aluminum Profile with Milky White Cover, Led Track Diffusers with End Caps, Mounting Clips and 90 Degree Corner Connector

Nice quality way to fit and cut trim for led stripThe end caps don’t fit tightly so a little adhesive was required the low intrusive profile is good and the diffuse fits great and well ( you’ll need a blunt tool to start it off but once it’s started it’s easy

Great set of lights that are easy to install and loof far more professional than just an LED strip. The strips fit nicely in the casing although it would have been handy to maybe have an extra L angle fixing to be able to make a different shape , that being said I made it work around my son's desk and he is super happy. You get different light sequences which is great especially when he just wants something soft when reading. For the price the quality of these lights is exceptional. They have been up for about 10 months and are still working perfectly.

First off the pictures show my 2 lengths of led lighting, one I have fitted the defuser to and the other I haven’t. Its your choice if this is what you are after but I don’t think any will not show the individual LED whilst also letting a good amount of light throughThey give a far better look when the lights are off and a softer look when the lights are on. I’ve dropped a star as the defusers do not seem 100% consistent in opacity.They are a bit of a faf to fit but are light enough so I’ve only used 2 clips per length but that seems adequateGood value for money and improves the overall look of the led strip lights, I think the effect would be even better if the were hidden as cupboard up / down lighters or otherwise hidden.It did take me 2 hours to fit for a 5 meter length so allow plenty of time.

Great for DIY led projects and a good price.Would buy againThe only thing I can suggest is to use double sided taper if mounting under counter. I screwed them in which makes it very hard to recycle/reuse the frame and leds

This product was used on a self built bunk bed and it was easy to install. The support did need a counter sinking prior to screw in to wood. The sizes of the aluminium sections are just a described and can be easily cut with a junior hack saw but will need to file the edges to get a good finish.The diffuser was perfect for what I wanted to achieve, it didnt let too much light from the LEDs though but they enough from the type off led strips I used .

This is an odd mix of well and poorly designed elements. The diffuser cover is difficult to fit, the instructions suggest sliding it on but the lip is not wide enough to hold it so that's impossible managed to click on at least one but it was tricky. The corner pieces are a mixed bag, the strip has to be threaded through them first as there's no other way to get them on which renders the mounting holes pretty pointless in continuous sections - if only they had been in two parts a back and front plate that would have made the whole process so much easier. By contrast the wasll mounting brackets for the straight section are a simple clever click in design.Not sure what the final effects will be but a few small design changes would have made things much simpler.

Good product, well made

Excellent solution for LED strip lighting when you want to hide 1) the strip 2) angle the light 3) cover a joint. Great value for 3m of this aluminium profile with diffuser and fittings.Unlike other reviews I found this easy to fit and easy to get good joints, but I did think about it all before rushing in and used a couple of handy tools to make life easy!As well as the usual pencil/ tape/pilot drill diy stuff, I found having a magnetic bit holder on my driver helpful with fiddly screws held on high, plus a slim mastic-trowel helped ease the brackets open so the profile clipped in quick.I measured placement of the brackets accurately, getting them right into the corners and placed one at each end of each strip, with another in the centre. To fit the profile into the bracket I used a ‘top in first’ method, then clipping in the bottom by using the thin flat end of my mastic trowel to slightly open the bracket. Finished off by sliding the profile along within its brackets to butt up the joint.A little patience and thought and it turned out well, for the cost (c£20 for 6M inc delivery) I’m absolutely delighted.Used this in my van conversion roofline for roofline 12v led lighting - perfect!Yet to have my light strips connected/fitted, but very impressed with quality, value, speedy delivery and ease of fitting/finished look - 5* from me!