Hooke Road Wrangler TJ Front Flat Fender Flares Steel Armor Wheel Cover Guards for 1997-2006 Jeep Wrangler TJ & Unlimited (2PCS)

I was excited to get this product and put it on my jeep as one of the final touches. Packing seemed decent but when i opened it the drivers side fender had a large dent in it and since I was past the 30 day window I could not return for a replacement. **Update** Hooke offroad contacted me and replaced the fenders with a new set. Great customer service and seems like a good quality and durable fender set. I will be purchasing from hooke in the future. I have had good luck with their products in the past. Also installation is a pain in the rear. I found the best way to get them to line up is start the bottom rear bolt and the top then take a screwdriver and stick it in the hood latch hole to pull the fender to get the front lined up. After putting a few inches on your arms everything lines up. I could not get the four under the fender bolts to line up so I just drilled new holes and put in new bolts with nylon lock nuts. The light holes will need drilled out with a step bit to get 1 3/4 led lights to work. Also purchase a wire genie 2 for the led lighting if you want parking lights and turn signals to both work. I love the look it is just more work than I had planned.

The quality of the design of these fenders is very poor. They do not line up with your tub and radiator gril where it mounts in the front they do not lineup do not spend your money on this. They do not give refunds they gave a percentage of what you gave for it and if you go to send it back it cost $179 shipping please do not buy this and waste your money. I am stuck with one right now that does not fit anything. And they will not return any messaging. You sent them an Amazon will not help either you get lost in there maze of questions.

fast shipping lowest cost compared to other available options i could find yes the material is a little thin yes you need to man handle them a bit to get them bolted up all and all, for the price and quality i am very happy. all the people complaining they don't line up or fit, put your purse down and use the bolts to draw them in to your tub and fenders and everything fits tight and right when locked down. one thing i dont see in the directions or any provisions is the pad for the hood by the latch. also there was part of the packing foam that was adhered to the middle of the directions on one side so that was annoying. otherwise good finish, good fit, great price. very happy.

If you dont have some mild fabrication ability pass on these ones. I didnt realise i had to cut the factory fenders to install these but thats not a deal breaker. Fitment is bad 1/2" off for mounting. The biggest problem is the piece on the inside that mounts to the bracket. Its welded wrong. Will have to cut the factory weld on the bottom, bend it out and re-weld. I have the drivers fender off for some other repair if it had been in place and cut per instructions it would never go on. It could be a quality control issue or a fixture problem at the factory but at a third of the price of US made ones i can live with having to make the adjustments. As far as materials and design i say 8 out of 10. I like them just going to take some work.

They look great, but you better be ready to put in some work. Aside from cutting the stock fenders (thats the easy part). Getting everthing to line back up was a bit of a hassle, an I found that the bottoms of both sides dont touch the tub evenly all the way down. Not horribly but enough. I also had to use a file to get the hood latch on the passanger side to line up. Would have also been nice if they used a 3/4 inch hole instead of a 1 1/4 for the blinker. being that 3/4 marker lights are easier to find then the inch an quarter markers. Edit- for the person asking - its not truly 3/16. The mounting points at the grill an inner fender mount seem to be 3/16. The rest of it is thin sheet metal. Didnt think to measure it befor install. Looks like about 1/8.

These are great! Easy to install and looks really good on my Jeep. If you off road with your TJ you need a set of these.

Poor alignment, the holes done line up, blinkers are too far up for 1 inch AND 1 1/4 housings, I had to use a winch a ratchet strap and a Jack to get these to ALMOST line up. Please order the better quality ones unless you're VERY mechanically inclined to make these work. I wish I read the reviews before I purchased

Does not fit 2003 jeep tj properly , you must cut 1/2 inch off the square plate