AJANTA OEM Replacement Belt (5/8x90 1/2) Compatible with Toro 112-0301 FITS Models ToroLX420, LX423, LX425, LX460

This is not an OEM replacement for a Toro LX500 as stated. I installed this belt an had problems when trying to stop or change direction/gears. The drive would stay engaged and it was very hard to change from forward to reverse. This created a safety problem. I tried to adjust the tension several times but that did not solve the problem.I purchased the OEM belt from the Toro store and the problem was fixed.

Country to what the description specifically claims, it is not compatible with the Toro LX 460. It is thicker than the original, to a point that seizes up the gears and does not allow it to start up. It is so tight that the blades get engaged regardless of the position of the blade engagement lever.

Ripped apart within 10 minutes. Wouldn’t slip properly on the transmission assembly, got stuck and shredded around the primary pulley on the crankshaft. So tired of “oem” claims for belts that don’t work. Even Toro can’t send the correct belts. Too long, v width is wrong.

Did not work on lx500 toro, belt is to thick causes the belt to get stuck and keep the rider in gear and will not stop safety is a problem

Belt was too thick and too tight for the lx460. Blades spun while disengaged because of tightness of belt

I haven't had the opportunity to put this belt on yet and don't know if it is actually the correct size but it does appear to be a quality belt.

While I received the belt in a timely manner it is definitely not the right length. From the picture you can see it is an 87 inch belt and not the 90 that my Toro lx425 requires.

This item claims to be an OEM replacement for Toro part number 112-0301 for LX model mowers. The length seemed to be ok for my LX460, but the belt is too thick and is getting stuck between the pulley and the metal guide on the bracket so my mower still won't run properly.