K750136 Suspension Stabilizer Bar Link for Chevrolet Corvette

These MOOG stabilizer bar end links work better than OEM and made a noticeable difference on my C5 Corvette. As soon as I installed them, I could feel the front end tighten up, giving the car a more solid and controlled feel. For the price, you can’t go wrong. It’s a huge upgrade for just a few dollars, and the installation is super easy. If you’re even slightly handy, you can do it yourself without much effort. If you’re looking for a simple but effective improvement to your car’s suspension, these are a great choice. Highly recommended!

Quality parts. Worked out well.

These are very good quality. Definitely worth the price. My only complaints are they are raw steel and need painting if you don't want them to rust and they are heavier than factory alloy link for a corvette.

Easy installation

Super strong and have grease fittings so they can be lubed. Be sure to tighten them according to the torque specs, I tightened one below the 60 pound spec and it eventually came loose and made noise, they must be properly tightened!

So these endlinks aren't your standard GM-issue non-greased metal endlinks. These puppies have zerk grease fittings which should keep them well lubed for a good long while along with a solid construction. Don't forget to order a grease gun along with some grease...but you knew that going in when you bought these.. What you might not know, and the catch I found is...you won't be able to properly install these without a skinny 18mm wrench. Standard open ended wrenches will be thicker than the base nut on the bolt and as you tighten the nut down, your standard-thickness wrench will not allow for a full tightening. This is because the wrench will hit the sway bar before the nut is fully torqued by your 18mm rachet. I ended up ordering these skinny wrenches from Amazon and got these links installed about a week later. (The skinny 18mm worked great) https://www.amazon.com/gp/product/B078JDRMH2/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Overall, some stars were deducted because if the installation issue but in the end, they're still a very nice product from Moog.

Bought 4 for my 2007 C6 corvette and the fit perfectly all the way around. Seems to be good quality.

I have a 2009 C6 Corvette that had clanking type noises coming from underneath the car. They would usually occur when on bumpy roads. Reading all the Corvette forums they said to replace the end links. I replaced both front and back and the noises are gone. The installation was not too difficult, the hardest part was torqueing the nuts due to the limited space underneath and the long torque wrench. I used a low profile jack to raise the front. Other that that it was not too hard. These have grease zerks on both joints of each end link. And Amazon was the cheapest price that I could find online. Highly recommend. G.

As expected