HDPE (High Density Polyethylene) Sheet, Opaque Off-White, Standard Tolerance, ASTM D4976-245, 0.5" Thickness, 12" Width, 12" Length

I got the HDPE (High Density Polyethylene) Sheet, Opaque Off-White, Standard Tolerance, ASTM D4976-245, 0.375" Thickness, 12" Width, 24" Length and it's exactly what I needed for some table saw jigs miter slots that I will be making.Product is sturdy and feels very well made.The only downside, as others has pointed out is that the measurements are 1/4 inch short on all sides, so you dont get what you are paying for or described, but it still will suit my use.

I used these HDPE sheets to make custom fishing rod holders inside my rod locker box. I own a 96 Stratos bass boat that did not come with any kind of rod holders in the rod locker compartment. I found several pre-made rod holders on the internet but when I clicked on the price I nearly wet my pants.......cheapest one I found was $189.99 plus shipping!!!! I finally found an article on the internet the other day where another brilliant fisherman used material like a cutting board to make his own........and let me tell ya, it worked perfect and it looks professional {not some kinda mickey mouse crap}!!The one I made can hold 10 rods & reels without any of them getting a single scratch. I first used cardboard as a template then I traced my design on to the plastic material. A fine tooth jig saw blade cuts thru this stuff easy, but does take some time due to the precise angles. I put pieces of fuzzy Velcro where the butt of the rod sits along with short pieces of elastic cord. After securing this piece in my rod locker, I went to a local sporting goods store and purchased 10 golf club bag tubes. I had the perfect size circle door knob drill bit so that cutting part went faster. After securing the front section that holds the rod tips........I now have a custom rod locker organizer for a total cost of about $75.00 and that's figuring in any labor cost!! Saved ALOT of $$$$$$$$.

The thickness is very important to me I order 12"x24" x1" the majority of buyer complain of the size, you want a custom size than pay the price. The thickness was spot on 1 inch exactly. I always order bigger than I need saves me a lot of headache of reordering again. The item is excellent even if there is scratches I plane it down., Think of it this way when you but lumber does it come to the size that is stated,no. The seller to me is number one , very good product, fast shipping. I personally recommend this company I will be buy more item from this seller :)

UPDATE #2I have ordered yet another piece. This time 12x24X.25 inch. The dimensions were again short just under the advertised amount but this time I was prepared for the discrepancy. I used the material to make a tray that attaches to the front of my truck seat to hold and control cell phones and other electronics. I used a 2-part epoxy glue from Hobby Lobby and drilled small detents in the surfaces that were to be glued to increase contact area. It holds very well. The glue is called 'Super Glue Instant setting epoxy". So far I have not been able to separate the adhered pieces.UPDATE----I ORDERED IT AGAIN. dimensions are the same as before. I do really like this material for making sliders and as an indoor anvil for crafts. My wife doesn't like it when I cut the carpet or drill into the floor. My workshop is nice but the living room is nicer lol.SEE PICS. Material was flat and cut very well. Cut edges were very smooth and didn't need any finishing for my purposes. Dimensions on delivered product are NOT AS DESCRIBED. Ordered 12X12 product I received was 1/4 inch short on both sides. Definitely a 5-star product if described accurately.

Purchased as a secondary insert in the Avid Armor GS53 Chamber Vac. Saves on vac time and keeps bags flat between sealing pads.

If you haven't used HDPE before, this is the basic version of Starboard and the same material as a food grade cutting board. Cuts like soft wood and won't easily gum up a saw if you take the speed slow.The material was delivered flat and undamaged.As long as I can get a small piece at a reasonable price, I won't bother buying a full sheet to store the remainder.

I bought this sheet of HDPE to fill the gap under a faucet and mounting block (see photos). The sheet was exactly as described. I used my Dremel US40-03 Ultra-Saw to cut 3" x 3" blocks. It cut just like a piece of wood. There was no melting. It was easy to sand the rough edges left by the cut. The holes I drilled in it were smooth.

As another poster, used for snow blower skids so doesn't scratch a ground aggregate decorative drive. 4 skids, 8 surfaces out of the 12 X 12X 1 piece. Works better than the original on an uneven sidewalk. They'll far outlast the snow blower. Understand the side cuts are rough, the piece I got was reasonable well packed but had some minor surface scratches. Also as other posters have noted the actual dimensions are 11 3/4 X 11 3/4, didn't matter in my application.