Type: Single Sliding Door Glass Mount Installation AssemblyNew Anti-Lift DesignAssembly Contains All Necessary Hardware to Complete the Installation with 3/8" or 1/2" (10 or 12 mm) Tempered GlassBrushed Stainless Steel ConstructionThe CRL Laguna Series Glass Mount Single Slider Kit contains all the components you will need (except the tempered glass) to complete this style of installation. This model is used in applications where you are attaching a single sliding door in an 'all-glass' opening where you have a wall on one end next to the door, a glass transom above the door, and a fixed glass panel on the other side of the door. Bi-parting double doors are not possible for this application.The Anti-Lift Sliding Door Top Rollers can be attached to the glass with either Surface Mount or Flush Mount Fittings (both are supplied). The Rollers have a 1/8" (3.2 mm) up or down vertical adjustment to aid in door alignment. This system should only be used with 3/8" or 1/2" (10 or 12 mm) tempered glass. Laminated glass cannot be used.Complete glass fabrication details and drawings are available by contacting our Technical Sales Department. DOOR SYSTEM LIMITATIONS:Maximum Door Weight: 220 Lbs. (100 kg)Maximum Panel Width: 53-1/2" (1.36 m)Maximum Panel Height: 98-7/16" (2.50 m)Maximum Track Length: 104" (2.64 m)EACH KIT CONTAINS:Two CRL Laguna Series Anti-Lift Top Rollers with Glass FittingsOne CRL Laguna Series Top Sliding Tube with End Caps at 104" (2.64 m) in LengthOne CRL Laguna Series Top Sliding Tube Wall Mount End Cap (Fastener to Wall is Not Included)Six CRL Laguna Series Top Sliding Tube Glass Mount ClampsTwo CRL Laguna Series Door Stops (One Left Hand and One Right Hand)One CRL Laguna Series Bottom Floor GuideImportant NotesNOTE: These fittings are not for use with laminated glass.
Trustpilot
3 weeks ago
2 weeks ago
