SRIWATANAWide Floating Shelves, Rustic Wood Wall Shelves Set of 2, Wall Mounted Shelves with Large Capacity for Many Rooms Decor, Black

I would have like to see 2 more spots to fasten it to the wall. They seem a little shaky.

Needed some cute shelves for my office that would hold a good amount of pretty light stuff and these are exactly what I was looking for. Purchased one set and when I got them installed ordered a second set for the other side of the room.

These shelves work alright, but there were a couple of things I was disappointed with when I got them.First, the materials aren’t great quality. The screws strip easily, the brackets are all bent at slightly different angles, and the boards themselves feel flimsy. This leads me to have serious doubts about the weight limit on these shelves (which is supposedly 40lbs according to the images, but only 29lbs according to what the seller said in the Q&A section).Second, the assembly is more difficult than I had anticipated. They come in three different pieces with the necessary screws and anchors, but you have to put them together yourself. There are no marks to indicate where the brackets should affix to the boards, nor any pre-drilled holes. You have to put them together from scratch. The instructions are unhelpful, and because of the poor design, these will likely never look perfectly symmetrical or straight no matter how hard you try. But I found a method that worked better for me than the instructions:1. Hold the brackets where you want them fixed on the board. I recommend aligning the board to the back of the brackets (the side where it will attach to the wall), both to reduce leverage pulling on the wall from the front and also to help ensure a flush installation.2. Mark where the holes on the brackets are on the board so that you know where the shorter screws will need to go. Then remove the brackets and take a knife (or other pointed object) and dig out a small indentation to help with installing the screws. Twist the screws in by hand just until they grip the board, then remove them.3. Put the bracket back on and install them with the screws, using the indentations you made to keep them aligned properly. The boards are soft material, so they can be attached with just a screwdriver, but be careful not to slip or you’ll score the surface.4. Once the shelves are assembled, line them up how you want them on the wall and mark the holes with a pen (remember that these will probably not look straight). Drill a hole for the anchors where you marked (I used a 3/16” drill bit for this, as 1/4” was too large for the anchors).4. Gently tap the anchors into place with a hammer, then screw or drill the long screws in most of the way. Before the screws are fully tightened, mount the shelf on them and then tighten them the rest of the way.

It was a pleasure to see extra screws and the quality of the materials

This has worked perfectly for storing my daughters towels in her apartment bathroom!

I never received any hardware to install them but it was suppose to come with it. Been running around to different store's trying to find the right screws. Unsure how to get in contact with the seller. The wood is a very light material.

Its a good product and very easily installed. I have alot of weight on them and no issues.

Was a little disappointed in the quality once mounted. The short sided 12 in deep mounts make the shelf unsteady for heavier items, such as large books. Good for lighter displays but would go with a different product if you're looking for a sturdy book shelf.

Bought these to free up walking space on the sides of our bed, due to having a smaller bedroom. Eliminates needing a nightstand and frees up floor space! Previously I had one floor shelf that made the bed off centre and one side of the bed too close to the wall. Easy to assemble and very sturdy! Only suggestion would be there are no screw holes in the boards so you need to be careful when attaching the base not to strip the wood.

The brackets are kinda garbage. With how much the bottom is supposedly supposed to hold, the tiny screw you put in the bottom isn't enough. They would work for a smaller shelf, not something this size. The piece of wood isn't even sanded, I literally got a splinter from holding it. I felt the need to add at least add a few layers of clear coat before drilling any holes. It seems like someone bought plywood and cut it up, slapped on some varnish and threw some cheap brackets and screws.If you want something to put a few knicknacks on, or as someone else mentioned, a cheap sidetable, it would be fine. Just prepare to sand it down (with a mask on, you don't want to inhale varnish crap)

I purchased these to hold up an aero garden in my kitchen that weighs 62 pounds with water and plants. The thing is doing great! No bending or warping. I recommend screwing directly into your studs for heavy loads.

I wanted these shelves for plants in my home office. They stated they can with hold 30 lbs I assumed that meant into a stud because there is NO WAY these will hold 30 lbs if they are not in the stud. The metal arms are not sturdy and they an easily bend. The board is press board and bow in middle if you don't even out the weight.

I'm really surprised with all the great reviews of this product. I was shocked when I received the item and the shelves are so light, they literally feel like styrofoam. I purchased these thinking the shelves would be more sturdy but sent the entire thing back. I didn't expect the shelves to be pure wood but at least be sturdier. Was very disappointed in the quality.