Saddlebag Housing Tail Run Brake Turn Light Lamp LED Len for Touring Street Road Glide CVO Electra Glide Ultra Classic Ultra Limited CVO 2014-2022 (Black Smoke)

These are VERY BRIGHT - which is a good thing!!! I don't like that the Rushmore bikes only have two small tail lights and no dedicated stop light. It may have been cool to be unsafe thirty years ago, but not anymore. I've always been concerned about being rear-ended. My wife's previous husband lost his life when someone rear-ended him (of course, him not wearing a helmet was a big factor in that). These will definitely get people's attention.These appear to be exact copies of the one's available from H-D - at much less the cost. They are definitely high quality and even use genuine 3M double-sided tape to attach to the bags. For all I know, they're made at the same factory in China as the H-D ones.The ONLY negative thing I have to say is that they come on when the ignition switch is on ACC (regular tail lights are off). Not a big deal as I can always unplug them in the bags. IDK if the real H-D ones do the same or not but considering the price difference, I don't care.NOTE: These DO NOT come with installation instructions. We are MEN (mostly) and we don't read them anyway!!! If you really need instructions, download them from the H-D website or consider trading in your Harley for a Goldwing.For the benefit of your wife who may buy these for you...Installation was easy. I did it in 15 minutes with a Phillips screwdriver and wire cutters to trim the ends off the zip-ties (not included, BTW). They plug into a connector under the seat. Unplug the existing connector and plug the control box into the two ends of the connector you just unplugged - then run the long ones out to the bags. Before you zip-tie them in place, check your turn signals to make sure you have the right & left sides correct. I ran the wires out to just behind the shocks and then up and over into the bags (with the connector for each light inside the bags). Make sure your bags are clean (use rubbing alcohol) before sticking the lights on. Peel a small part of the red stuff off the double-sided tape first. Hold them in place and peel the rest from underneath (while still holding in place). Press firmly to make sure it's stuck tight.

These do not work on HD Road Glide 2021. False advertisement as the unit is not a match from images. There are only 2 wires exiting lights and the connection is wrong vs what image shows(3). When compared to other real conpany lights, 3 wires are proper to be compatible. Ordered replacement, same thing. Don't order!

These saddle bag tail lights exceeded my expectations! Perfect fit, excellent look and quality and super simple to install.

Love it easy installation

I plugged them into the harness under the seat and they worked like they should. Turn signal, brake and hazards all function like they should. *I'll edit this over time to see if they hold up.Mounting them to the bag is up to the user. I "eyeballed it" but I would suggest using something to make sure your spacing is the same for both sides. You don't want to apply one and find out the sides are not spaced the same.Routing and hiding the wires is fun, I am using some VHB clamp downs on the bag to hide them. Definitely need a better solution for this.Well as others stated, "When brake is applied the turn signal stops".I have people telling me I must have a short but unfortunately this is how they operate.Would like to see if it can be modified to not do this.I know others are saying to throw them away. I'll tinker with it at this point.*Another edit: I did get them to work better, found that these lights have a missing wire. There was only 5 wires where the Harley plug has 6. After adding a 6th wire I got the lights to work a lot better.Still not perfect, there's a delay and a funkiness' in the way they work but definitely a lot better.The Questions and Answers says brake & Turn Signal don't work together is - "Solved". Maybe they did the same thing by adding a wire.

These bad boys are fantastic. I have virtually no real knowledge on things as I am new to the motocycle (Harley) community. I took the seat off, figured out pretty quickly which connections went where (which again, not having any knowledge on these things, was still made super easy), then attached sticky part to bags, and BOOOM......SUPER BRIGHT, really nice!! I'll buy again on my next Harley, you should too.

Installation was pretty straight forward, but of course we've installed half a dozen similar sets over the past four years on various bikes so not our first rodeo.The wiring harness was plug and play. The quick disconnects were a little different, stiffer, than the ones we're used to dealing with and I had to play with the routing of the wires on the bags because they're much thicker than similar sets from other brands.That being said, they went on and looked great. Nice and bright. Appeared to be good quality, but on the first ride out of the garage the bike's check engine light came on.Checked the codes and had the light reset, there'd been A LOT of work done to this bike over the last couple days so it seemed it could have really been anything at that point. The H-D dealership immediately blamed the aftermarket lights, but these weren't the only lights that had been added so they couldn't say for sure which ones.Ignoring that, we went on. Light was off, then came back on again. Seemed to come and go. So on a whim we unplugged the saddlebag lights since this was the only product/manufacturer we knew we hadn't bought before. Proceeded to run the bike for about 5 hours that day - over 200 miles and the light never came back on as long as the saddlebag lights were unplugged.Unfortunately it's now too late to return them, so we're stuck with lights nobody will want on their bike. Next time I'll know better and stick with H-D or Custom Dynamics.

Unit works fine when plugged in but my lower tri bar light stops working