Mud Flaps Kit for Toyota XA50 RAV4 2019-2024 Mud Splash Guard Front and Rear 4-PC Set by TOPGRIL

These are very easy to install on the front. Just pop out the pins with a flat blade screwdriver, put in the mud flap and push the pins back in. The screws go in easily in the available holes. The back is more challenging. The lower bolt aligns right up and so does the pin at top. Leave the lower bolt loose, remove the wheel, then put in the two additional screw. Align the flap so there is no gap and tighten the lower screw. Some people complain there is a gap on the rear flap and that is because they are not aligning before tightening the lower screw.

Great product and price

Easy enough install. Top hole uses existing plastic retainer, middle screw taps into the center hole of an existing plastic plug, and the bottom screw has to self-tap into the plastic wheel-well (works better if pre-drilled/pre-punched, but doable with a bit of awkward muscle-thru using the included Z-'wrench' or a stubby Philips screwdriver). Taking the wheels off would have made things easier. A couple of very minor cons: the gloss doesn't quite match the rest of the (piano-gloss) plastic trim on my 2021 RAV4 Prime SE, and the front-facing molded pattern may invite ice buildup (time will tell how it handles Midwestern winters - I'm taking a raincheck on durability for now). Still, no regrets at this price point - I needed a functional product to minimize front wheel dirt spray onto to the lower sides of the car, and these did the trick. Would recommend.

These seem like they will serve their proper purpose, but some of the mud flaps in my kit leave gaps and don’t fit exactly like they should. The left rear flap is the worst offender, leaving a 2-3mm gap at spots. As you can see with the picture, it looks like the flap should be installed a little higher, but it’s not possible because there is no more room due to contact on the bottom. I also had a hard time installing some of the screws because of the tight space and the resulting angle of the screw driver. If you read the description closely, they do say “fix directly with screws and a special screwdriver” but I guess that means you, as the customer, supply the special screwdriver. (I missed that detail myself.) With only 2 of the 3 screws installed it still seems to be attached well. It should also be noted that only 2 screws per mud flap are supplied, despite having 3 points for attachment. And while you do not need to drill holes for installation, you are indeed making new holes in your car body. The screws are self tapping and go into the plastic rim relatively easily.The material is bendable but seems rigid enough to stop rocks and mud from getting on the body of the car.

Its feet’s right in my car

These did not fit my Rav 4 like the description said they would. Had to return them.

Installed on a 2023 RAV4 LE. Easy install. Looks great and looks like they were always there.

These fit perfectly, line up exactly with factory pre-drilled locations. Installed all four in less than 15 minutes, look like factory-installed option!!