Tracer4215BN

As recommended by Will Prowse from DIY Solar Power, the Epever 4215BN worked exactly as he said it would, easy to set up, configure, and worked on the first try. It started producing power to the batteries immediately. The unit was delivered extremely fast from China in only a couple of weeks, unlike ordering from Aliexpress which takes months. Extremely satisfied with the purchase.

I was really looking forward to using this controller but it arrived DOA. Easy return process. Maybe on the next project. This purchase was replaced with a victron.

Warning! This charge controller is not compatible with Lithium batteries. When I purchased this unit on Amazon, it advertised in the description that it works with Lithium batteries. Even if you spend the hours to research and set up the proper "user" settings, this charge controller will not correctly charge lithium batteries. Buy a charge controller that has a specific setting for lithium batteries. The "user setting on this unit does not work , even with the correct manual settings.

I have been building solar for friends and family, experimenting with different products for 4 years now, I have a background in electrical engineering, I first saw a review from two YouTubers and got one because I really trusted those two YTs, it worked out after months of testing for me in my situation I have 12 huge AGM Telco battery setup and the EPever 40/150 is now what I recommend also, service and support is right there fast if you need them, next I will play with larger Inverters and sooner or later I am going to have to start a YT channel to pass on all this information :) Me Bob @grandassets

The EPEVER 40A MPPT Solar Charge Controller is well engineered and built. It was appreciated that the vendor sent an email containing a PDF that contained an updated user manual. I connected the unit to my solar array and AGM battery bank and it has performed flawlessly. Highly recommended.

no fancy bells or whistles just a really well made solar controller

I have used this charge controller made by the same china manufacturer for Renology, It has the exact same part numbers, They are NOT compatable and will throw you off. No where does the instructions tell you this.

They reached out to me and tried to assist without success. The controller did not work. They listened and will replace. I have updated to 5 stars for customer satisfaction.

Unlike most controllers which are light plastic, this seems nice and heavy like a proper controller should. Shipping was fast. Very happy.

This is my second Epever Tracer4215BN 40A MPPT solar charge controller! These are extremely robust, high quality solar MPPT controllers which were designed to last a long time! If you are undecided about PWM vs MPPT, you should only consider MPPT if you need/want every possible watt of energy from your panels. The MAJOR advantage of MPPT over PWM is the ability to connect your panels in series, increasing the total voltage, thereby reducing the current in the wires back to your charge controller. Big deal? Well, YES! You see, as current increases, so do the heat/resistive losses in a wire and if you use a modified 100' 14ga extension cord as I do, you can lose a surprisingly large amount of solar energy to your wires. You can avoid this by simply connecting multiple panels in series (e.g. 4 x 100W panels at 22V) to produce around 88v which at 400W (theoretical) would require only 4.5A of current. The same 400W in parallel would push 18A through your extension wire, causing it to heat up significantly, dropping the total power delivered at your battery. The MT-50 is a must-have accessory so be sure to pick one up with this unit!

It was exactly what I wanted for a reasonable price