🍻 Fill it right, sip it tight!
The Growler Filler for Perlick 600 Series Faucets (630) is a specialized accessory designed to fit exclusively with Perlick's 600 series faucets. This innovative tool allows for bottom-up filling of growlers, significantly reducing foam and wastage, while its 12-inch long filling tube ensures a seamless pouring experience.
A**R
Very useful product. Works best with a traditional bar, not kegerator.
The product needs a bit of food-grade lube on the o-ring to fit the Perlick faucet. On a tap tower the fitting and hose keeps one from putting a bottle completely under the tap (the bottle is now too tall to fit). One has to hold the bottle at an angle, hopefully with the bottom a few inches lower than the base of the tower, to fill. A longer hose length is recommended, but the existing length will work if the base of the tap tower doesn't interfere with the bottle. It would work best with a traditional bar that has only a narrow ledge under the tap.
H**A
Why chintzy on the tubing?
Fits my 2 630SS's nice and snug. Doesn't say stainless in the description so I assume the metal is chromed brass. Have to take a star off - it has the foot of tubing as described but I'd certainly pay another few dollars if it were 15 or 16 inches, or even 20. Growlers and 22oz bottles don't fit under the 9 inch faucet clearance on a normal 12 inch tower. this is the only filler I could find for the 630, so it's not like the competition is so stiff.But I rant. The reality is that the hardware fits fine, the four stars are because I'm satisfied and would buy it again. The tubing can be changed out - for a few bucks...
A**T
Four Stars
Very tight fit, works well
T**E
Fits the Perlick 630 faucets nice and snugly without issue
Fits the Perlick 630 faucets nice and snugly without issue. Unfortunately, I get MUCH worse foaming using the filler than without! Filling a 64-oz insulated stainless growler, which is pre-chilled, I get maybe 2/3s full of beer and the rest is foam. I can get a near perfect fill on my own just holding the growler on angle and holding very close to faucet.
C**R
Fits my Perlick perfectly
Use this to fill growlers easily and prevent foaming. The only issue is that with most kegerators, there's not a lot of clearance from the top of the growler to the bottom of the tap faucet, so after you fill it you have to carefully pull the filler out of the faucet, then move the growler to the side to pull it out.
P**.
Not a great fit
It fits too tightly in the Perlick 630SS tap. I'm sure it will work fine but it is so tight it doesn't insert all the way and pushing it in tears up the black o-rings on the filler nozzle. I feel like it takes a lot of force to push it in enough to get a good seal that won't leak.
J**Y
Perfect
Fits and functions perfectly with my Perlick 630ss faucets.
T**Y
Great Product, not maintenance free
Orings around mouth dry up quickly. Be prepared to replace or use keg lube.
Trustpilot
4 days ago
2 weeks ago