White LED Interior Lights Kit for Toyota RAV4 2016 2017 2018 2019 2020 2021 2022 Super Bright 6000K Interior LED Lights Bulbs Package + Install Tool

I purchased this kit with the hopes of adding more light to my wives car. The lights inside her RAV4 were dim. This kit has helped solve that problem. The design is functional, and they were easy to switch out.

This kit came with enough bulbs for:• Vanity mirror lights• Front overhead Cabin lights• Rear overhead Cabin lights• Rear right side Cargo lightWith two bulbs to spare (my license plate lights seem to be permanently affixed LEDs, but your mileage may vary.Installation was fairly easy, with the exception being the front overhead Cabin light. To pop this one off, you want to insert the tool on the rear facing side, and once there is a gap big enough, pull down with your fingers. It takes a fair bit of force, and I ended up breaking part of my front right clip (though it was still functional)Once the console is released, it's smooth sailing with two twist lock bulb holders. You could unlock them with the plastic tool, but I was able to do it myself with just my fingers. Be careful not to burn yourself, if the bulbs were on during or before removal. Once completed, use a flashlight to align the FRONT MOST (windshield side) clips with the holes, THEN align the rear side. If you do rear first, the front will not snap in and you will need to pry the rear off again.Both vanity lights come out by inserting the pry tool on the LEFT side of both assemblies. Then you can tip it down, and slide left to fully remove the assembly with an inch or two of wire to move around. Slide right side back over BEFORE snapping back in.Rear overhead cargo was super easy to get out, but a little challenging to align the bulb during reinstall. There are little cutouts on the clear plastic along the edge, use the pry tool to pop it off. Make sure your LEDs point downward, otherwise you won't gain much light from this!Rear cargo was a little wonky; I opted to unplug the harness (push lever with pry tool and it pops right off super easy) so I wouldn't have to be bent over trying to take it apart. It has a few small pieces so be sure not to lose them. You have to release the tabs on the clear piece from the gray housing, once that's done the little switch will come loose and you'll be able to slide the gray bulb holder out of the gray shield. Replace bulb, put switch back in the groove, and once everything is back together, snap the clear plastic back on. Then just plug it back in and you'll be golden.As I said earlier, my license plate appears to have permanently affixed LEDs as I was unable to find a panel to remove that allowed access. Since it's already led, I didn't see a reason to dig deeper. Your mileage may vary.I opted to keep my bulbs in the same bag as my two extra bulbs, in case I ever need them. I'd recommend holding on to them just in case, small bulbs like this are usually relatively expensive and when you need them, you NEED them.I'll try to update my review down the road and keep you posted on how long these last; they seem to be pretty high quality with good solder joints and personally, I don't see them failing any time soon unless I got faulty LEDs. VERY impressed that they dim when the car dims them, I was expecting flickering from voltage drop, but no such thing happened.All in all, I'd recommended this set to a friend given my experience so far. Very impressed with the quality for the price, I feel like you'd spend more at the auto parts store for worse bulbs. Though, only time will tell.

Great LED lights! They original yellow light bulbs were not of my liking so I looked for another option and I’m so glad I did. Hard to remove the lids but that’s a Toyota issue, the LED were easy to install but if watching a tutorial will definitely save you time. Perfect for my 2019 RAV4 Adventure :)

These LED lights were an added bonus to my 2019 RAV4 XLE. The bright white color and functionality of the car when I hit the locks to open the car doors allow me to see inside the car, which is a good security deterrent for thieves. The installation for the front lights near the eyeglass holder made it a little difficult, but after it was a speedy install. Although the dome light did flicker when we put it in; we were able to fix it by adjusting the holder to the light. All in all I love the new look and brightness it gives!

Some people say to get brighter (more expensive) versions, but I found these bulbs to be plenty bright enough in a pitch black night.The install itself is "simple" but I would not necessarily say it's "easy".The map lights (the ones above the center console) are the worst! Wayyyyyy harder to remove the trim than I thought it would be. I actually ended up half removing the trim and just popping out the lens covers for the bulbs, which slight cracked some of the holding tabs, but I could not otherwise remove the trim for the life of me!The vanity lights are fairly straightforward. Make sure you pop out the left side (driver side) of BOTH vanity light, because the bulb/connector runs to the right (passenger side) and you don't want to dig your trim tool into that.The backseat light was probably the easiest.The cargo light was easy to pop out, but the bulb is hidden under this annoying plastic cover/shield that is tricky to remove.The bulbs themselves are easy to remove, just pull them out (not twist/unscrew), and then the new LEDs just slide in until they're snug.All in -- absolutely worth the upgrade!

son muy claras, tal como decian en la descripcion, me gusta mucho

Much brighter than factory interior lights, fits 2021 RAV4 perfectly.

This item came with 8 bulbs but I was only able to use 5. The back seat light connection ends aren't exactly to the OEM light so it swings and light stays facing up. License plate lights by them self can’t be replaced would need to get the a new housing. The other 5 that I was able to use were decent.