MSI MAG FORGE 100R Mid Tower Gaming Computer Case (Black, 2x 120mm ARGB PWM Fan, 1x 120mm Fan, 1-6 ARGB Hub, Tempered Glass, MSI Center, ATX, mATX, mini-ITX)

Perfect for a budget build, has everything you need and plenty of space in it, make sure to manage cables well as the back panel may not fit or may take some force to lock in like mines did, has a very nice slick look to it, the extra 4 fans is a great edition, they work great with no problems and there are many colour choices to choose with a press of a buttom located at the front top of the case

used to build my first pc it has good ports such as usb and audio, has a reset button and a button to change rgb which is amazing as you do not need to install custom rgb software as long as you are alright with the one preinstalled. the pre installed fans are also good quality and quite with nice lights for rgb. it even fit my triple card gpu with some fiddling. the glass is very clear and for the most part does not reflect. there is space for ssd and 2 hard drive trays if you still use them. all the airfliw spots come with mesh that can be easily cleaned even the one for the power supply and the top one is magnetic. over all it was very easy to build in. only change is the pcie slots which are breakaway and does not use screws but for a budget case i will deal with it considering how well everything else works. the power button also feels nice. over all 9/10

I purchased this case to swap out my old Thermaltake view 27 case with a more 'modern' look. I was in the hunt for a smaller chassies so I can tuck the unit under my desk on the small compartment which described in my desk's instruction booklet as 'desktop shroud' which is way too small for most of the cases in the market.Pros:- It comes in with 2 ARGB 120mm fans as intake and 1 blackout fan for exust. For most of the builds just plug in and good to go.- Robust build for moving or tossing around (please don't)- Front mesh is fine enough to act as a dust filter, but I still got some filters installed.- Air intake is great, it is basically a see through design.- Good price with tempered glass, and the glass is slightly tinted so it got that 'expensive look'.- Plenty of spaces for fans, go crazy on fan layouts. I am currently running 3 intake fans at the front, 1* 120 fan exust at back, and one fan exust from top through AIO, its working great for me at the moment.Cons:- Very tight psu shroud, be careful when run cables, especially you are looking for getting cable extensions, as you will run out of gaps to cable management. I am running a NZXT C750 psu out of it and it leave me about 1.5 inch gap to route the cables. I guess anything larger than the C750 will be impossible to fit in the shroud (i.e. corsair rm650).- ARGB controller in the most inconvinent place, the PCB of this controller is basically naked and screwed to the case, so be very careful when installing plugs. and it require a lot of thoughts in cable management.- No lower shroud cutouts for GPU power cables. Although you can route the cables via side cutouts, but it is just as neat as other cases. If you are the same as me running a NZXT Kraken, good luck plugging the USB to mobo, it is a good and risky stretch.

As a long-time MSI fan, their components have always been my go-to choice.After seeing the MSI MAG PANO 100L PZ in a tech YouTube video from CES 2024, I knew this case needed to be part of my setup.This MSI MAG PANO 100L PZ boasts a striking 3-sided window design, offering a panoramic view of your build.It's extremely easy to build in. The case doesn't have any kinda of brace in the front of the case, it opens up completely once you remove the side and front glass panels.The back of the case provides ample space for cable management, and there are also two doors to conceal those cables if needed.The case offers the flexibility to mount your GPU with either a dedicated vertical or a horizontal mount.Pros:Incredibly easy to build in.Looks amazing!Cons:No PCIe riser cable is supplied.Like any glass panel, it's a fingerprint magnet. You'll have to deal with three windows!

Good quality considering the price, only issue I've had is trying to get the LED fans to glow but other than that, its quiet and a good size for small and large desks, very easy to clean the front fans and, just simply pull the front of the case off and clean. Came with 4 fans pre-installed which saved time and money. Only issue is that as its on the smaller side there's not a lot of room to cable manage in for people with larger hands but would still recommend for a first time builder.

Love this case. Easy to build with, great fans and RBG. I used a B650 MB, 360 AIO and 9070XT. Plenty of room. In hindsight I should have used a Project Zero MB but no issues. Would absolutely recommend it.