Fiat mud flap set, front, 50901517

Easy to install, 10mm spanner or socket and 4mm Allen key.Perfect fit, opted for oe parts rather than aftermarket,

Took about 15 mins to fit both. I’ve ready the reviews which say they don’t fit snug. That’s true and they can and will if you drill holes and screw then on. I like that they clamp on and in a day I won’t notice the slightly less than perfect fit. But they will help keep the rest of the motorhome clean :-) !

First the good: these are sturdily made, with a concave shape which does protect the bodywork. I've used them on a motorhome where the bodywork gets wider behind the cab doors and before I fitted these the mud and detritus kicked up from the wheels meant this area got regularly filthy. These definitely help. They're also easy to fit, with a metal clamp that fastens to the seam underneath, plus two simple clamps that fasten onto the wheel arch - which is the not so good news. These clamps, although simple to fit and do the job, are not particularly good, and as OE Fiat parts I think they could have come up with something better. Mine are soon to replaced with some sheet metal screws, which whilst it does mean drilling the wheel arch will be much more adept at doing the job, neater and more secure.

Perfect fit for my fiat ducato campervan

Easy to fit but you have to use sikaflex or similar to get a perfect fit to the wheel archThis was only cosmetic but worth the extra effort without drillingProtects our electric step now it used to get covered in mud

Easy fit. You only need an Allen key and a 10mm spanner to fit the mud flaps. I did in fact drill one more additional hole and used a nut and bolt with washer to give extra strength, but I don't think its necessary. Good fit. Just tried them out in the rain and they do keep the front side of the vehicle clean. Mine are fitted on a Motorhome which protrudes outwards after the cab of the Ducato part. Well pleased.

Fitting is fairly easy, however the alignment to the body using the clips provided is questionable. I ended up drilling two holes and fixing with self tapping screws and fit is OK

Softish rubber/plastic material,easy enough to put on the vehicle. Although the final fit to the wheel arch is not very close. I would have expected a much better fit given it is an OEM part from Fiat themselves.

de bonne qualité correspond bien au descriptif

Eenvoudig te monteren. Goede kwaliteit van rubber. Perfecte pasvorm.

Ottimo prodotto

Lätt att montera

Schnelle Lieferung. Habe die Teile gleich montiert und muss sagen passt einwandfrei. In nur 10 Minuten waren die Schutzfänger bombenfest an meinem Wohnmobil montiert. Als Werkzeug braucht man dazu einen 10 Schlüssel und einen kleineren Inbusschlüssel