2 Pack Aluminum Alloy Flag Pole Rings, 360 Degree Rotating Flagpole Flag Mounting Rings Spinning Flag Pole Kit with Carabiner for 0.75-1.00 Inch Diameter Flagpole (Φ 1 inch, Black)

We have a flag location where the flag is subject to a moderately steady breeze nearly every afternoon. It used to furl up all the time.This is a beautiful product that I think is going to work very well to prevent furling. The manufacturer seems proud of their product. The rings arrived in a box that was almost like a jewelry presentation box.When I first rotated the rings, I noticed the slight scraping sound mentioned by other reviewers, so I lubricated both rings with a few drops of 3-in-1 oil. I also added some graphite. It felt smoother and was quieter.Inserting a split ring (key chain ring) for each ring to account for the 90 degree difference between flag grommets and the snap link is a good idea (see diagram). Most American households probably have a few of these in the junk drawer.After having used this system for several days now (with fairly typical wind) I noted the flag did still furl occasionally. However, with these rings, I was able to simply tug the bottom corner of the flag and it unfurled instantly. Great!

Don’t waste your money. Purchased these because I was looking for a more durable ring set for the 3x5 flag I have in front of the house. I live in Colorado Springs, so there’s generally a light breeze most days. I began to notice that the holes began to stretch out, and it only took 2 months for one to break altogether. And of course, the manufacture doesn’t have its own customer service, and Amazons policy is only 30 days. Complete waste of $13.If you’re looking for a sturdier ring set for your flags, look elsewhere.

Quality material, easy to install and works great. No more unraveling my flag every half hour. Even on a windy day the flag flies freely because of the swivels on the rings. Also, the spring clips make it easy to attach the flag even though it has brass grommets. Oh, by the way, this is my second purchase. I have them on my Viet Nam "We Will Never Forget" flag also.

Great product, well built and strong. I noticed the other day that one of the rings separated. Upon closer examination i noticed the two pieces were threaded. I put them back together and was back in business. Helpful hints, hand tighten the two pieces together, I mean the two parts on each side of the rotating ring. Also add a drop of 3 in 1 oil to the rotating ring to keep your flag from hanging up by not rotating. When installing, point the two anchor bolts straight down so your flag doesn't get caught on them.

I bought these flag pole rings separately because they looked much sturdier than others especially those in kits. They are much sturdier than others I have had, and the clips are stronger than they look in the picture. My flag is flying, it has been a little windy for three days and it has not tangled or wrapped once. I DID have to adjust the rings when I first hung the flag, it can hang up some on tightening screws. Fixing that only requires watching the flag for awhile, then loosening and turning them to a better position. This is important to know in advance in case you are placing your flag in a hard to reach place. Hang it somewhere accessible until you know it is turning the way it should then put it in its permanent location.

The box these came in was really nice, the installation instructions were clear, and everything seemed to connect as expected. The problem is, they just don't work. The rings don't spin freely with normal wind -- they bind up and the flag ends up wrapped around the pole anyway.

Update to drama: Was contacted by vendor, they provide new product, I compared the orginal failed ring quality to the new one, night and day. Updating my rating by 3 stars as they made good, and they new rings held up to a microburst weather event where to tore trees down but Our Flag is still there.If it was possible to leave less than 1 Star for the quality of this and the customer service of BonyTek I would. The locking collar that retains the swivel ring failed.The threads that the collar is supposed to screw on and off seems to have the tolerances off. It allows the collar to pop off.Purchased Jan 14th,2018, failed Mar 5th, 2018.When I contacted BonyTek about the issue, here is their response."Message from 3rd party seller:thanks for your valuable advice, we will highlight it, and improve our product, thank you very much."

I have a spinning flag pole so that the flags don't wrap around the pole. I love my large house flags and have one up for very occasion (birthdays, seasons, holidays..). I like the flags to be up at an angle usually and not always horizontal, so the pole ring was essential to keep the flags from 20 minutes later sliiiiiding down to the base. Just moved to a city where the wind is very strong daily and the flags were getting whipped around like crazy (see photos), so I really needed them now. My new flag pole is black and when I saw these in black I thought I would buy them. They came beautifully packaged when you opened the box.....you could actually give them as a gift they were packaged so nice! They were black and matched the black flag pole perfectly. They were aluminum and heavier than previous ones I have used and seem much sturdier. Totally love them! Highly recommend. (in the photos the clip you see at the top of the flagpole is attached to the pole. Only came with one though and I needed a pair).

All good.