Size:2000W 12V Features: 1.Low no load current draw in standby mode. Accurate LED Display of input DC voltage and output AC voltage. 2. Real pure Sine Wave Inverter, can power up Sensitive Electronics, maintain solid good energy Solar power inverter, for solar system use with solar panel , solar charge controller and battery bank. Keep up with load demands in normal use. Can work 24/7 off grid power for home power supply. Silent operation, not noisy, intelligent control of the fan working. Inverter details: DC input: 12V DC input range: 10V-15V No Load Current Draw: 1A Efficiency:85%-90% AC output: 120V AC Regulation:3% Frequency: 60Hz Socket:15a USA type Low Voltage Alarm:9.5V-10.5V Low Voltage Shut Down: 9V-10V Over Load: shut off, recover manually Over Voltage Shut Down:15.5V Over Thermal: Shut Off Output Automatically, Over voltage protection Cooling Ways: Cooling Fan will run when the temperature is over 50 degree Precautions: 1. Please use the standard battery cables we sent, or a full power output may not be guaranteed. 2. Please do not connect the inverter with the grid power, and a reverse connection of positive and negative is also forbidden. 3. Please do not overload. If your applications are inductive loads, please choose the inverters whose continuous power is 3-7 times higher than the watts of your appliances. 4. Please turn off the load first then turn off the inverter. And as there is a soft start function, please turn on the inverter first then turn on your loads, or the output may not stable at the first seconds.
J**T
Unit is not set to US code; has split voltage on AC output.
Will not properly start a 15amp miter saw or other power tools. The miter saw buck and stutters on start up. Found the ac voltage only 60v on load terminal and 60v on neutral terminal. This is not US code and popwer tools are not designed to run on a split voltage ac circuit. Also, the grounding lug is nothing more than a brass screw that when nut is loosened (very difficult to loosen when it is unsecured inside the unit. I will not remove the cover for warranty reasons. The ground lug should have been a permanent attached lug, not a small screw that has to be held by small needle nose pliers to l;loosen the nut. Be aware this is a floating ground unit, not suitable for power tools. Works ok with tv and lights. Do not recommend this to solar users. Also, seller should have listed this unit as having a floating ground. Will not buy from this company again.
A**S
Pretty Good so far.
So far so good. I plan to use this inverter for my camper to run the small refrigerator and power smaller AC devices. I measured the refrigerator at 330watts and tested the inverter when I recurved it. I was measuring right at 90% efficiency at 342 watts and 87% efficiency with a 100 watt fan. Pretty good! The inverter started up the refrigerator with no problem.The only negative so far is I wish the remote switch it came with had the voltage display on it instead of the main unit as this will be out of sight.I will add to this review once I have it installed and have used it some.
N**A
Junk
First it is NOT FCC rated or tested. interferes with Amateur radio gear and AM radio frequencies. Second it does not deliver any where close to 4000watts. Best I have received is 2000 if its slow usage and surge or startup in rush. Big piece of junk. tech support? What a joke there isn't any.
C**R
Great inverter!
This inverter works really well! I made a simple PCB to automatically start it at a set battery voltage and shutdown at another set voltage. This was possible through the remote start rj-45 port. I love this inverter! It truly works well and reliably every time!
M**N
I get the rated power
I used this inverter with a custom built battery for mobility. The power remote added the feature that makes me not have to open the box to turn the unit on. I am also getting the rated power output!!
A**R
Solid
Worked as desired for my application. Would recommend.
L**N
Very easy too use and set up.
Works great in my camper!!! Definitely does it's job.
G**N
Eight Hundred Watts
I’m hooked directly into my trucks twelve volt system. It immediately was ready to power one twenty electronic without a fuss. Very nice indeed. I plugged in a Hepa filter and was greeted with the number forty six. Not a bad number considering one is the best and three hundred the worst. I’m sure if I left it plugged in for a time it would filter the air fully and bring it into green territory. But back to the inverter. I’m planing on adding it to my solar array setup. Having two eight hundred watt inverters connected to my twenty two hundred watts of battery backup with the twelve volt system makes for a more robust setup and getting everything I can get from the completed setup. I didn’t have a single issue and I’m very, very happy about that because it rarely happens as such. The inverter has two outlets and a remote that can be set up away from the system with cat six cabling that was included as a accessory. I’v only had it up and running for a few days so far and the Dan has only gone on twice as I put a load on the system. I’m satisfied with the quality of the inverter and it’s been a solid performer so far. The pieces and parts of the inverter fit well together and gaps and lines are consistent throughout. Switches and the digital readout have performed well in informing me of its current status and load parameters. I’m going to mount it after a week or so because I wanted to make sure it’s functionality was steady and no issues popped up requiring me to disassemble it. Four Stars ⭐️⭐️⭐️⭐️!!!
Trustpilot
1 day ago
1 month ago