2 Pack Ceiling Fan Adapter Plate, Universal 4 Inch Ceiling Light Mounting Bracket, Steel Junction Box Adapter with Ground Screw, Light Fixture Mounting Bracket, Light Crossbar for Wall or Ceiling

Adapter plate worked great. I have a very old house with old junction boxes and this plate allowed me to mount a modern ceiling fan without much issue at all. Also, is should be noted that the holes in the plate are pre-threaded, so you don’t have to tap them in the event you need (like me) to screw bolts up into the plate (just need to drill clearance in the wall/ceiling for the bolts).

Worked like a charm for adapting my smaller ceiling box to a 4" diameter ceiling fan bracket. The kit comes with 2 adapters, 4 screws, and even some twist wire connectors. I simply mounted the adapter under my ceiling's drywall and screwed it into the existing box. The plate sits snugly and firm once installed. I hung a 17 lb 52" diameter ceiling fan from it without any problems. There is a very very slight wiggle forward and back unless you mount the 4" bracket screws in a cross cross patern (perpendicular to the 3" screw placement) for best results.

Was upgrading the ceiling fans of my 1950’s house and realized the bracket for the fan didn’t line up with the ceiling fan box I had. This bracket is exactly what I needed to make everything line up properly with a very sturdy connection.Highly recommend for anyone who is having trouble lining up the bracket holes of their ceiling fan with their ceiling fan box.

Fit properly

Worked fine for putting up our ceiling fan.

I bought a silly light fixture that wanted you to shove the connection back into the ceiling but the plate had a middle section. Bought this and had it installed in minutes. Good thick metal.

They do the job they were made for, but it's cheap metal that flexes easily. As a result it's impossible to get the lights to sit properly flush with the wall.

I hung a Hunter ceiling fan with this on an angled ceiling. The task would have been impossible without something like this. The original box was very shallow and of smaller width than the fan mount. The fan kit came with long screws to screw directly into a truss or other wood but because a specific side of the fan mount needed to be on the "up" side of the slope, there was no where to screw the long wood screws into. With this bracket though, I was able to easily mount this bracket to the shallow box and the mount the fan at an appropriate angle onto the bracket. Worked perfectly and absolutely no wobble in the ceiling fan.