Minn Kota Deckhand Electric Anchor Winch – DH-40

Great witches they do a wonderful job

Jan 1st and a beautiful day so I installed the Deckhand 40 on my small pontoon boat. It is very quiet and has good power. I plan to order a remote switch now. The reason it requires a minimum 20lb anchor is it's freefall drop capability. It will not drop freely with less weight and they really don't explain this feature in the sales literature. I didn't know it even had that feature. I have a 20lb anchor and it worked great, sitting on the trailer, in January. It freely drops the anchor and pulls it up and parks it horizontally. Optimum anchor weight is probably 30lbs. I bought this needing a 20lb anchor but the Deckhand 25 didn't seem as nice. My guess is from testing it today that if you are using the maximum anchor weight or even greater it may bind the rewind spool tight which explains the negative reviews. The same thing happens on my SxS when I pull excessive weight on its winch. If your boat is big enough that you need a minimum 40lb anchor then don't buy a winch that has a 40lb max capability.

Works great, very strong winch, will pull 28lb anchor out of thick river mud with ease!! Really appreciate not having to pull the anchor by hand. I switched to a 28lb anchor and it grabs great in swift current and I don’t have to jump up to pull the anchor. I think it’s a great safety feature as well. Planning to add on on the rear of the boat for sideways fishing.

Just finished my first fishing trip with the Deckhand and love it. Won't be without it again. Would have given it five stars but it would not deploy all the way with a 20lb anchor. Had to pull out rope twice to get it to the bottom. Also the plug for the remote switch wire plug needs a 1 inch hole which I thought could have been designed smaller. I put the switch in the rear of the boat which made running the wire through 2 bulkheads, drilling 1 inch holes in each, in not user friendly locations. I did read one review about the anchor not going down all the way and will add weight to correct that.I was in the wind yesterday and it held great, could deploy and then pull out more rope with the trolling motor to get in the right position then hit the lock switch. It has plenty of torque and speed when coming up. I'm using one group 24 battery and the battery was still at 12 volts when I got home after being on the water 8 hours using the trolling motor and the Deckhand.Great product and looks to be made good. Time will tell but won't be without it again what ever it takes.Update after over two years of use. It’s now 7/2019 and it’s still going strong. Works just as it did out of the box and I’ve gotten very good at positioning the boat over brush and my favorite spots, even in the wind.

High quality winch, easy to install but they only have a 48" cable lead from the motor so you'll need to run 8AWG or 10AWG wire to the fuse and battery.

I installed the MinnKota Deckhand 40 on my Tracker ProGuide V175 with remote switch and 30lb anchor. This gives me an extra option over the position (anchor) lock I have with my trolling motor and a ProNav setup. The ProNav is great but if you really want to hold a position in wind and waves you need a real anchor. I have a bad shoulder so I needed something that would deploy and retrieve at a touch of a button.The installation was challenging but not the fault of the winch itself. The deck at the bow of my boat has limited room and I had to build a platform for the winch. This required me to move my navigation light and remove a cup-holder and tool caddy (never used them anyway). Since removing these items from the deck left large holes I added an aluminum plate under the deck for added strength. Otherwise, the winch would have just been mounted to marine grade plywood and I wasn't sure the deck would hold up to the repeated stress.I found it easier to remove the cover and motor assembly from the frame for the install. This required unplugging the wires for the load sensing switch and the motor. I removed the motor from the unit which can be done by removing a c-clip and carefully rotating the motor assembly out of the unit. Just be sure not to lose the spring and plastic block at the end of the motor shaft. These parts act as part of the load sensing mechanism in conjuction with the switch. After the removal of the cover and motor you will have complete access to the mounting plate and holes for drilling and mounting the plate. Re-assembly was quite easy. The connectors on the circuit board are marked M+ and M- for proper orientation of the motor wires. The switch wires can be put on either way. The hardest part was getting the motor positioned properly to slide back into the frame. After the motor is in place you can re-install the spring, block, and c-clip. Re-attach the wires and cover and you are good to go.The main electrical connection wires are quite short. I was able to splice these directly into the trolling motor power as both would not be used at the same time. If your power source (battery) is not within a few feet plan on picking up some heavy gauge wire and good splice connectors.If you are not comfortable with altering and drilling holes in your boat and making electrical connections / splices I would suggest you have the winch installed by someone who is.Overall I am very satisfied with my purchase and I am considering a second winch for the aft of my boat.

I have two of these on my lake boat, forward and aft. I fish in lakes that can be quite deep and manual anchor deployment and retrieval is out of the question. These wenches take all of the work out of it and allow me to move around and re-anchor with little effort. No issues with operation so far. Installation was a bit of a chore but nothing that a handy DIYer can't handle.

Wow the perfect life saving anchor system. No more getting up and walking to the bow and pulling in the anchor. It is a safety feature I love. No more back straining either. No more tipping the boat or falling over from that experience. I mounted it to the bow of my alumacraft 12 foot row boat with stainless steel bolts, lock washers, & nuts.. It took some figuring out, drilling, and bolting the base plate to the bow. Then I just slip on the MinnKota Deckhand 40 electric anchor winch and lock it in place. I then hook up my 25 pound anchor. In the Fall I just remove the anchor & the winch and leave the base plate bolted on. I flip my boat over onto the boat trailer and strap it down for the winter after removing the stuff from the boat. When I tow the boat I have a 5 gallon plastic bucket in the bow for stowing the anchor. One is not to let it hang while hauling the boat per MinnKota's instructions. The 5 gallon bucket keeps the anchor in place while hauling and prevents it from beating up the boat. It takes a minimum of 25 pounds up to a max of 40 pound for anchors to work. I discovered my 15 pound anchor was too light for this system. I had to use a minimum of 25 pounds. I have had this system on my boat for at least three years. The two: MinnKota 55 pound thrust electric tiller motor and MinnKota power winch are a great combo with my Sears 12 volt marine deep cycle battery. I can go fishing with ease for hours. I usually only go for up to 3 hours with power to spare. Keep in mind weather, wind, and distances are important factors to keep tract of. Plus does the boat launch have a port jon or better? LOL. I have a set of oars in case. I do row a lot too.

I was tired of manually pulling and dropping the anchor on my 15' boat. Since I anchor to fly fish and move a lot, the Deckhand allows me to reposition or move with little effort. I am using a 20# river anchor and the winch has no trouble with spooling in or out. With a mounting plate it is easy to remove and install on the bow for trailering. I bought the remote switch for convenience to raise and lower the anchor from the console. Running off a 100AH battery, the winch can raise and lower a 20# anchor more than a 100 times in 50' of water. I am very pleased with the construction and ease of installation. Installation on the bow platform using a mounting plate plus wiring the power supply and remote took only about 3 hours.

I used the Winch last week when we went for our annual fishing trip. We were at Clear and Stoney lake. This unit is one of the best made and easiest to install. The performance out of 10 would be 12. It picked up heavy amounts of weeds like they were feathers. The drag worked perfectly and kept us stable during rough waters Used it for 7 days and did not have to boost the battery. I used a 20 lbs anchor and it locked in perfectly and didn't move going through waves a 30 miles an hour. I did not get the remote control because I have a 70 year old remote control who was always tossing the anchor out and hauling it back in. The only thing that got tired on him this time was his finger pushing up and pushing down. He wanted to sleep in the boat so one would touch it. I would recommend this product to anyone who fishes a lot like myself. If you fish alone the remote control is perfect for you. You can sit at the back and control the winch in the front. Life is to short, enjoy fishing as much as you can and the Minn Kota Deckhand 40 will make much more pleasurable

Get the remote switch with it! Easy to use. I have 2, one for the front and one for the back. I run a 25# Pyramid off the front and a 20# pyramid off the back. Keeps my 16 ft Princecraft in the position perfectly.

fonctionne très bien. Un bémol, on ne peux pas le faire fonctionner à distance. N'oubliez pas de prendre celui avec télécomamde inclus

My lovely wife first said “No”, to me wanting to purchase this, now loves it as she lifts the anchor and moves the boat anywhere on the water she likes, while I sit on the back and smile. 😎