Universal Printer Cleaning Kit Unblock Print Head Nozzles Cleaner Flush

This saved a multi-function printer that had been sitting for a long time. Using this with the provided instructions and some you tube videos, this restored the printer to perfect operating condition with an overnight soak of cleaner in the dried up print heads.Fantastic.

You Tube has instructions, but it was easy enough to figure out.On my printer it took a couple cleanings and still had to use the machines cleaning process on the print heads.

Works well. Make certain you turn off the power before cleaning the print heads (critically important to avoid permanently damaging the print heads). Go slow, easy (don't depress the syringe plunger rapidly). Use a lot of paper towels (replace after each injection). Blot all wetness from the bottom of the print head tray and printer body. Allow printer to dry overnight. Run print head cleaning and nozzle check three (3) times the next day.

This is a joke. The bottle of cleaner is tiny, 3 inches by 1 1/2 inches. The tube is 3 inches long, too short to be functional. They did not send the needle.The instructions say to immerse the printhead nozzle and soak it in the cleaner but nothing about using the stuff you just bought. If I could do that I wouldn't need the syringe, needle and tubing!I was desperate, so I tried the tubing and syringe set up. The tubing can be connected to the yellow connector and the connector fits the syringe but the tubing isn't the right diameter to connect to the tiny pin that draws the ink from the cartridge into the Brother MFC printer. A total waste and now I can't return it.

Tried this product after seeing a video. Did not work on my HP 8025 Pro printer after multiple tries. No improvement with the cyan printhead. The cyan tube is blocked on my printer. I was hoping the solution would loosen it up.

It worked well. My husband did the process and it was pretty easy to clean my printer!

The product worked so well in unclogging the print heads after not being used for couple of years. I was so pleased on how it worked will definitely recommend it to others.

The system came with a syringe, clear tube, and an adapter. The tube does not fit on the syringe no matter how hard I tried. Eventually I was able to get the adaptor to fit directly onto the syringe but even this is not easy. I do think think the adapter would have fit on the tube. I was able to clean the nozzle, but that was only thanks to the design of the printer. I gave it a 3 for value for the money but honestly, for $19 I could have rigged up something and use IPA that would have worked as well.