WAC LightingH Track Right L Connector in White

My "tee" was on the wrong side from the terminator at the box, so I disassembled this and swapped the center for one of the ends. It didn't matter one bit if the runs were opposite, just so I could connect the T as right-vs-left (or left-vs-right).

Think it through- I was trying to put them into the track upside down. A DUH moment...

I like this connectors.

If money were no object, I wouldn't even bother buying normal 90˚ connectors. These solve all transition problems you might encounter in a track installation, especially if the surfaces are at angles to each other. Better yet, if you have to turn a corner and change ceiling angle (like in my picture) this does it all. You could even rotate the track lengthwise on its axis if you were installing this on your space station gallery. This is a total problem solver for such environments! If you don't understand this issue, trust me, it's a life-saver.Basically it's two connectors with a totally flexible joint in between. Anything is possible, even the pointlessly impossible! Someday when I have a high enough ceiling I'm going to make a loop-de-loop of track, and a few of these with a few chunks of track are going to make this happen!In some ways I think it's aesthetically superior to normal rigid transitions as it removes some of the "hardness" of a regular track installation. If you want a rounded radius to your corners here you go. You can even stretch or compress the curve a bit if you are that compulsive. On the other hand if you are this compulsive, you probably wouldn't have a bunch of track on your ceiling in the first place... But it's good to have options!Note that also solves the issue of having a "left" verses "right" 90˚ fitting as is sometimes required. You don't need such things if you have this product. Bend one way, it's a left, bend the other way it's a right.It's also well made. WAC makes nice stuff and it fits the Lithonia H-track perfectly. I do hope the material, especially the soft plastic catapillar part, is UV-stable. At least rigid plastic bits can be painted white again if they yellow. Not sure that would be the case with this material, not easily anyway.

Works perfectly. I have a solid wood (no attic space, not even framing space!) ceiling leaving track as my only option for flexible lighting. These worked perfectly. They have knockouts so you can wire from room/ceiling (which we had to get done) and once you power this, you can extend with tracks. Great product.

This worked as advertised. It’s the perfect connector to achieve flexible angles.Not sure why this is not available at hardware stores and/or made by other manufacturers of track lighting supplies

Less than half the price of what you would pay at Loes or Home Depot. Also half the quality, construction is flimsy, but it will work.

Works as advertised.

It flexes in all directions. Easy to install. Make sure your track is “h” track.

working perfectly..

As advertised and works as expected.

Works perfectly for intended purpose

Works exactly as intended. Would buy again but when doing more track lighting.