3D PVC wall panel black A10038B

These panels were very easy to put on the wall and my 13 year old was impressed , we put them on with no more nails and they stuck to the wall straight away , quality of item is brilliant they are not cheap ridged plastic , they were also very easy to cut with scissors , I wished I’d ordered the damaged ones tho as the damaged box I did order was perfect but £20 cheaper .

Love these, easy to pop on, some I used adhesive that you can buy off amazon but mainly used Kelasy double sided sticky tape, these have been up for about 4-5 months? And I only stocked little bits on, and it’s holding up well, and if you have ambient lights it looks even better, if your going to remove them and they’re stuck use a hairdryer fairly near for about 30-60 seconds if you use adhesive otherwise easy to take off, decent size fits perfectly on my wall

I received this item and it is very good quality. I highly recommend this seller. The glue I purchased along with this item is also working very well. I’ve added some photos showing how I matched the 3D panels with a wooden wall panel, which may help others get ideas for installation and design.

This product was good quality.The reason why I gave 4 stars 🌟 was because they did not supply the adhesive for the wall panels.Other suppliers that I other from on Ebay included the adhesive and the panels were alot more cheaper than this seller.

Great product, easy enough on a good flat wall with some no nails glue. Definitely worth the planning time and be sure to lay each one the same if you have ocd. They don’t fit perfectly but I’m sure some decorators cork would sort if you wanted, you don’t notice it all that much. Amazing light fractions from neon lights at night, so they’re worth a purchase too. Shame you can’t buy individually as I needed an additional 3 but had to buy another 12. They’re static too, so get the room clean of dog hair first or have the anti static duster at the ready. Overall it’s given my office an amazing unique look that is the talking point when people enter. 👍🏼

Having built a garden summerhouse/bar, I was really struggling for what to finish the front of the bar with.We tried tiles and explored the idea of rusty corrugated sheets and then stumbled across these panels on Amazon.With the bar being lit under the counter by led's we opted for these thinking they'd look great with the different angles and shade.Having applied them directly onto tile backing board using a grip adhesive, they look fantastic.Make sure you check the pattern orientation to either match the tiles or mix it up a bit.I used a multi tool to cut to size ensuring I had a level piece of wood baton to use as a guide.As the surface is raised, it can be awkward to keep a straight line.Measure twice, cut once.These always get lots of positive comments and feedback.Final look: amazing.

The 3D wall panels Grey are amazing I have them in my lobby gives a really modern luxury 3D feature wally experience. Everyone comments on them even the postman. You really can't get a better look for your wall. I cut them to size with a Dremel & lightly sanded the edges. Don't be intimidated by them thinking you won't be able to get a great finnish. That's what keept me in two minds about getting them. They adhere solidly with no nails grab adhesive & cut easily. They really are a next level solution to makeing you home look fantastic.

Really really impressed with this product. I was a little sceptical before ordering as to do this job properly I wanted to use plaster tiles but didn’t want to fork out for the expense at £25 per tile! I mounted them onto 9mm ply backing boards with strengthening beams, and glued the panels on with no nails. The panels are very fragile until they are mounted. Once glued in place they feel strong, rigid and a nice tactile feel over plaster. No need to paint and the surface can be easily cleaned with household cleaners. The only issue I’ve had is hiding the joint in the tiles but will have to play around with a few solutions. Would definitely recommend these tiles but beware you need to have a reasonable skill level to pull of a good result if your going to DIY.

Los paneles 3D de Art3d me han sorprendido muchísimo por su calidad y acabado. El diseño en forma de diamante queda increíble una vez instalado: aporta profundidad, luz y un estilo moderno que cambia por completo la habitación.El material de PVC rígido es justo lo que esperaba: se nota firme, no se dobla, no se marca y mantiene la forma incluso durante la instalación. Además, cada panel viene perfectamente cortado y encaja muy bien con los demás, así que el resultado final se ve limpio y profesional.La instalación ha sido sencilla. Con cinta adhesiva fuerte o pegamento de montaje quedan perfectamente fijados, y al ser tan ligeros no dan problemas al colocarlos. También se pueden pintar sin dificultad si quieres personalizar el color.

Easy to use and mount with double sided tape or liquid nails. Solid design and don't look cheap. Perfect for a bit of character in any room.

I bought these textured 3D wall panels after being inspired by an Instagram post and envisioned them enhancing my office space. Surprisingly, I ended up with 6 extra tiles and wasn't sure what to do with them. The photos in this review show how I creatively utilized these leftovers to fix an imperfection in a bedroom door. (I still haven’t had a chance to finish my new office space so I’m not able to show photos of how that turned out yet.)During renovations, I accidentally damaged the door, creating a hole that was difficult to patch up. Initially, I considered covering it with a mirror or poster, but I wanted something less tacky. I toyed with the idea of using a vinyl wrap or wallpaper, but then it hit me – why not use the spare 3D wall panels?I painted the white panels a dark gray to match my door, and the results were better than I expected. It's a unique solution that saved me from buying a new door. While the panels don't exactly match the rom’s aesthetic, people I’ve shown the photos too thought it looked cool… so I'm keeping it for now.I'm thrilled with how easy it was to glue (construction adhesive) and paint the panels, and I love the final look. If you choose to paint these, I’d recommend using a paint sprayer, if you have one or can get a hold of one. These 3D wall panels turned out to be a versatile and stylish fix for my home improvement dilemma.

Made of plastic the texture is really impressive. Looks great on the wall

Pannelli che si applicano facilmente, basta acquistare una colla/silicone di buona qualità, belli da vedere: effetto visivo spettacolare se illuminati da faretti multi direzionali come ho fatto io. Unica nota negativa la scarsa disponibilità, soprattutto di quelli bianchi. Art3d ottimo fornitore.