Yes4All Standard 1" Cast Iron Weight Plate - Ideal for Strength Training - Multiple Weight: 5LB to 25LB (Single & Set of 4)

Hey all, so I was debating on whether or not I should get loadable dumbells or adjustable dumbells. Well I chose to get loadable dumbells for a number of reasons. You can't beat loadable dumbells when it comes to price and quality. When you buy adjustable dumbells, you're likely buying a product that contains a bunch of plastic, but when steel dumbell handles and plates, there is no plastic to break. Also, loadable dumbells allow you to add more weights and get more bang for your buck. These Yes4all plates are the cheapest I could find and appear to be excellent quality. If you're wondering what my set up consists of, read below. Firstly, I purchased the 7.5 pound plates instead of the 10 pound plates. Why you ask? Well, the 7.5 pound plates are shorter (same thickness), so this was great as I wanted my loadable dumbell set to be as close as possible in size to standard dumbells at the gym. With the 7.5 and 5 pound plates, the size is simply great and not big at all. For my loadable dumbell handles, I actually purchased those from a company called New York Barbell; I purchased the 16" dumbell handles, which are excellent and high quality. I purchased a solid dumbell stand/plate holder from Titan fitness, which I highly recommend. Overall, I probably paid about $450 for everything (Twenty 7.5 pound plates, eight 5 pound plates, dumbell handles, and the stand). I also purchased four 2.5 pound plates from Cap (which were cheap and four 1.25 pound plates. Remember, you're dealing with a standard 1" diameter on these plates, so just be mindful that you get the right size. I know Yes4All sells a complete dumbell set, which is also a great option that includes the handles and plates. The only reason I didn't go that route was because I wanted smaller plates to make my lifting experience as comfortable as possible, and the 7.5 pound plates really are great for that. I also wanted to get a high quality pair of dumbell handles (not saying that the Yes4all brand aren't great, I have no experience with those, I just did my research and chose the other brand, but I'm sure they make great handles too as their plates are awesome). One more piece of advice. If you do go the loadable dumbell route, just know that it can be a pain to change the weights (which is the only disadvantage I can see vs adjustable dumbells). One remedy to that is buying another pair of dumbell handles that you can use for the lighter weight lifts.

Yes4All Standard 1” Cast Iron Weight Plate Review The Yes4All Standard 1” Cast Iron Weight Plate is a solid, budget-friendly option for anyone using a standard (1-inch) barbell or dumbbell handles. Here’s a breakdown of its pros and cons: Pros: ✅ Durable Construction: Made from solid cast iron, these plates feel sturdy and well-made. They can withstand regular use without chipping or cracking easily. ✅ Classic Design: The black paint finish gives it a sleek, traditional look while also providing some resistance to rust. ✅ Accurate Weight: The plates are generally well-calibrated, with only slight variations in actual weight (usually within a reasonable margin). ✅ Versatile Weight Options: Available in multiple sizes (5LB to 25LB), making them suitable for progressive overload in strength training. ✅ Good Grip & Handling: The slightly textured surface makes them easier to handle compared to fully smooth plates. Cons: ❌ Paint May Chip Over Time: The black coating can wear off with repeated use, especially if the plates are frequently dropped or stored in a rough environment. ❌ Slightly Smaller Diameter: Compared to some other standard plates, these are slightly more compact, which may affect bar balance at higher weights. ❌ No Rubber Coating: If you’re looking for plates with noise reduction or floor protection, these might not be the best choice since they are pure cast iron. Final Verdict: For the price, the Yes4All Standard 1” Cast Iron Weight Plates offer great value. They’re durable, well-made, and perfect for anyone training with a 1-inch bar. If you don’t mind minor chipping over time and lack of rubber coating, they’re an excellent investment for home or garage gyms. Rating: 4.5/5

Good quality and good for my home gym routine

Was nervous about reviews saying they don’t fit 1” dumbbell handles. They do! Great price, packed well with bubble wrap and box. Thinking about purchasing more

I got a few of these weight plates for my home gym setup, and overall, I’m really happy with them. They feel solid, well-made, and fit perfectly on my standard barbell. The weight seems accurate, and they’ve held up great through plenty of strength sessions. The price point is honestly what made me go for them, and I’d say they’re a great value for the quality you get. One thing I did notice is that on a couple of plates, the finish around the center hole started to peel a bit after some use. It doesn’t affect how they perform at all, but if you like your equipment to stay looking clean and uniform, that might stand out over time. For me, it’s more of a minor cosmetic thing than a functional issue. Otherwise, they’ve been a solid addition to my setup, and I use them regularly without any problems.

It does what it is supposed to do. Be heavy, fit a 1" bar. The weight is accurate to a couple ounces on mine. I like these because they don't have handles and take up very little space on my bar so that I can fit more plates. The paint is not great, if you chip the paint off, they will rust and could stain indoor carpets. For indoor gyms maybe go with vinyl covered or rubber plates. My gym is in the garage, so I don't care if they rust. I have dropped them hard a few times, and no cracks yet.

Just ordered on 1/3, on my doorstep 1/5...they must read minds. Good, solid pair of 1" 20 pounders since it was time to add weights. No frills, no gimmicks, just solid iron to throw around. What more could you ask for? So if you all will excuse me, I have to go out to the bench and wreck myself.

Very highly recommended. I'll cover the good, the non-existent bad give my suggestions. When you use dumbell handles, your limited to how much weight you can actually put on them. The width of the plates is the limiting factor. A lot of plates have a very elaborate design or even worse, holes in them, that mean they have to be wider in order to get up to the desired weight. These don't do that and are as thin a plate as you'll find for each size respectively. I had some old york plates like this and finding more was pretty hard. The hole is a snuggish one inch which is also a bonus. It means there's less room for it to wobble around on the bars and make excess noise. The sizes are great, also. 7.5 pound plates are something I've never seen that are a great find for me. One 7.5 pound plate on each side takes up a lot less space than a 5 and a 2.5. The 15 pound plates are also a fantastic find for me because they're the biggest plates I'd ever put on a dumbell. Anything bigger than that and it starts getting in the way when you do the lifts. I had to use 25's before I made this purchase and it was a pain. The thickness and the wights they're available in make these my choice. The closest I can come to a negative is the "free shipping". It's not free, it's built into the price. Go to the store and you can usually get weights for a little over a dollar a pound. It's a little more expensive here and that's for shipping. The other thing I noticed may change with time, but usually when you buy stuff in bulk, it's cheaper. Buy four plates individually and it would cost more than getting two pairs and that would cost more than getting a four pack. That wasn't the case when I did my order. The pairs were the best value. Don't assume the four packs are when / if you place an order. Check them all out. My suggestion for a newb is to get 4 x 5's, 4 x 7.5's, 4 x 10's and as many 15's as you can fit on your dumbell handles. Do this in groups of four because you'll have exercises with a weight in each hand and an even amount of weigh ton each dumbell. If you have or are gonna get a standard size barbell to go with it, then I'd get another 2 x 5, 2 x 7.5, 4 x 10, 2 x 25 and that's it for these. I'd then go to a local store and get as many 45's or 50's as you think you might need. Room is never an issue with barbells, but you still have to be able to make all the different weights. Because the shipping and handling is basically built into the price, I'd check to see if there's a store even remotely within driving distance that carries this brand and see if you can order them from that store and have them ship them to the store for you for free pickup. I wouldn't just drive out there if you're a beginner because they might not have all the plates you'd want to buy and that could be a long trip that you'd then have to make twice. As far as the 45's or 50's that you'd get for a barbell, I'd just get them anywhere close by and get the ones with the holes in them for these because it makes them easier to pick up. I also went with the 50's to make the math easier. If you find the smaller plates from a different brand at a local store I'd resist the urge to buy them unless they have the same variety of weights and smaller thickness as these. They may be cheaper, but it's not worth it.