Fluke Networks DTX-1200 120 CableAnalyzer Smart Remote

• Copper and fiber optic cable certification tester performs extended certification of high-speed networks to ISO and TIA Level III accuracy.
• Performs Category 6 autotest in 9 seconds and tests shielded and unshielded twisted pair LAN cabling (STP, FTP, SSTP, and UTP).
• Stores up to 250 qualification test results and downloads results to a computer for analysis and generation of network certification reports.
• Exceeds Level III accuracy at bandwidths up to 350 MHz that comply with industry standards including TIA, ISO/IEC, EN, ANSI, and IEEE.
• Talk features enable operators to communicate between the main and remote units.

The Fluke Networks DTX-1200 CableAnalyzer with smart remote performs TIA Level III accuracy tests of copper cabling at bandwidths up to 350 MHz that comply with industry standards including TIA, ISO/IEC, EN, ANSI, and IEEE. The meter performs a Category 6 autotest in 9 seconds. The meter includes one main unit and one smart remote. The DTX accepts additional test modules as network testing needs and requirements change, including fiber and network service modules. The unit supports coaxial adapters, custom limits, and talk between operators at the main and remote units (headphones included). A wire test can be performed to verify that cables are installed correctly. The permanent link adapter provides repeatable accuracy and Category 5e and Category 6 interoperability. The user-selected test standard automatically determines the test parameters and frequency range for the performed tests. Autotests can be started from the main or remote unit. The fiber autotest performs a dual-fiber, dual-wavelength certification test. The backlit, passive color, LCD display has a diagonal measurement of 3.7 in/9.4 cm and a resolution of 240 x 320 pixels (W x H). Copper and fiber testers are used by network technicians to troubleshoot, maintain, and optimize performance of copper and fiber optic cabling, hardware connections, and network settings in enterprise networks. The meter stores up to 250 sets of test results (graphical Category 6), and can store up to 2,000 Category 6 graphical link test results on a separately purchased 128 MB multimedia card (MMC). An autosave function ensures that test results are captured and saved. Results can be downloaded to a computer for long-term records retention, or imported to the LinkWare software for analysis and generation of certification reports to provide evidence that the installation has been completed according to standards and best practices (software and USB cable included). SpecificationsCable Types (shielded and unshielded twisted-pair LAN cabling)TIA Category 3, 5, 5e, and 6: 100 Ω ISO/IEC Class C and D: 100 Ω and 120 Ω ISO/IEC Class E: 100 ΩStandard Link Interface AdaptersCategory 6A/Class EA permanent link adapters: TIA Category 3, 4, 5, 5e, 6, 6A and ISO/IEC Class C, D, E and EA permanent link Category 6A/Class EA channel adapters: TIA Category 3, 4, 5, 5e, 6, 6A and ISO/IEC Class C, D, E and EA channelsSupported test parameters (selected standard automatically determines the test parameters and frequency range of the tests)Wire ; Length; Propagation Delay; Delay Skew; DC Loop Resistance; Insertion Loss (attenuation); Return Loss (RL), RL @ Remote; NEXT, NEXT @ Remote; Attenuation-to-crosstalk Ratio (ACR-N), ACR-N @ Remote; ACR-F (ELFEXT), ACR-F @ Remote; Power Sum ACR-F (ELFEXT), PS ACR-F @ Remote; Power Sum NEXT, PS NEXT @ Remote; Power Sum ACR-N, PS ACR-N @ RemoteAutotest speedFull two-way autotest of Category 6 Twisted-Pair links in 9 secondsTIA test standardsTIA Category 3, 5e, and 6 per ANSI/TIA-568-C.2 TIA Category 5 (1000BASE-T) per TIA TSB-95ISO/IEC test standardsISO/IEC 11801 Class C, D, and EEN, ANSI, and IEEE standardsEN 50173 Class C, D, and E; ANSI TP-PMD IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-TResults storage250 qualification test results (graphical Category 6)Data outputRemovable memory card and serial and USB interfaceAgency safety certifications and approvalsCSA C22.2 No. 1010.1: 1992 EN 61010-1 1st Edition Amendments 1, 2; EN 61326-1; Degree 2Power source (main and remote units)7.4 V lithium-ion battery pack, 4000 mAh, with 108 VAC to 132 VAC adapter/chargerWeight2.4 lb/1.1 kg, nominal (without adapter or module)Dimensions (main unit and remote)8.5 x 4.4 x 2.4 in/21.6 x 11.2 x 6 cm (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. A copper cable tester is a device for troubleshooting, inspecting, and certifying copper network cabling. Devices range from one-button tools for checking connectivity to complex tools for certifying network installations. Three types of testing include: (1) Verification---test whether a connection or cable is functioning correctly; (2) Qualification---test a network's ability to support specific speeds and functionality; and (3) Certification---verify whether a network installation meets industry standards. Cabling contractors, installers, and network technicians use copper cable testers to set up and maintain networks within a building or on a campus in corporate, academic, manufacturing, and other enterprise network environments. Fluke Networks manufactures tools for network infrastructure installation, testing, certification, and troubleshooting, in copper, fiber, and wireless networks, with its tools widely used by contractors, enterprises, and communication service providers. The company, which operates globally, is based in Everett, WA. What's in the Box? ------------------ * Fluke Networks DTX-1200 main * Fluke Networks smart remote * (2) Category 6A/Class EA permanent link adapters * (2) Category 6A/Class EA channel adapters * (2) Headsets for talk * (2) AC chargers * LinkWare PC Software CD * USB interface cable (Mini-B) * Carrying case * User Manual