TITE-REACH EXTENSION WRENCH TITE-REACH 3/8 Do-it-yourself Model

Had to repair the fuel drain valve on a 99.5 Powerstroke. This is a BEAR to get at because of the super tight space and nest of glow plug wiring (in my particular model vehicle). Some model years use a glow plug module which makes for a substantially cleaner access, but that was not to be in my case. Was able to clear some of the wiring out of the way and get this tool in there with T20 Torx bit. Once the driving could be started, it was just minutes before all 4 screw were out. Same with reinstall of the repaired valve. Took much longer to get the valve into position and secure it with a few turns of one screw. Once that far, this tool made the rest a cakewalk. Really impressive tool. OK, it’s plastic. For the lighter jobs, it’s just fine. Didn't stress it on torque, either. If you want really rugged, open your wallet for $120 for the metal one. Either way, the first time you use it, it will probably pay for itself. In my case, Ford charges $360 for the repair I did for $40, $30 of which was this tool.

I used it to replace the fuel drain valve of a Ford 7.3 60 seconds off 60 seconds on it paid for its self the first use. When it came to the final tightening of the screws it had a nice feel to it a feel I liked. Like a Grearwrench this is a complimentary tool a BIG time save so don't abuse it!

Not recommed impact gun direct use

Wow does this thing ever come in handy. You’re not going to break tight bolts loose or torque them down with it, but it works great to run bolts in or out 95% of the way. Definitely beats fiddling with a wrench or socket in a tight spot.

It feels weak and cheap honestly but it held up very well. I don't suggest using it to break loose heavy fasteners but its absolutely perfect for those long obnoxious bolts that are to tight for fingers and to loose for a ratchet. I'm very pleased with it! I'll likely buy more. Seller: PLEASE consider making an all metal version...

I’m not a professional mechanic but I wanted this to do a part replacement on my vehicle. I didn’t want to spend the money on higher quality product that does the same thing. It did work but feels like it would break after a few times using it or if you put too much torque on it. If you only need it for light use it will be ok. But not if you’re a professional or use it regularly. Made in china :(

This is a must-have tool for those hard to reach places, such as that stupid 10mm bolt hidden behind that valve cover just under the cowl before touching the firewall without any room to stick a socket wrench or anything with leverage to take it off. Well this is the perfect tool for just that. I haven’t really tried torquing anything over 15 ft/lbs of torque, but it seems to be well made even though it’s plastic. Get one for those hard to reach places and to get those bolts off/on as you please.

This piece of junk fell apart after the very first use, without any excessive force or abuse. It’s simply not designed for the purpose it’s advertised for. You might be able to take apart a cabinet with it. Please note that the internal bushing broke apart, and the rubber rings that hold the socket retention mechanism in place were pushed out.

良かったです

Outil super pratique pour réaliser de la mécanique dans des endroits difficilement accessibles.

Die Idee ist Super , allerdings ist das Werkzeug zum Großenteil in Kunstoff gefertigt und zu globig geraten , ich denke das das Preis Leistungsverhältnis nicht passt.

Undoing header nuts on a motorcycle.

This wrench fits the bill perfectly. Light weight, delivery was fast and I would definitely use this seller again.