HUANUO Single Monitor Arm, Adjustable Desk Mount for 13-34 inch Screens, Holds 19.8lb, 22.44 inch Max Height, Full Motion Swivel Gaming Monitor Stand with VESA 75x75mm and 100x100mm Compatibility

I have a big 32", heavy, LG monitor. It has an enormous stand, whose foot takes up my whole desk. This beast of a stand fit exactly into the mounting square on my monitor. It doesn't cover, or interfere with any of the connections on the back. My connections are adjacent to the mounting recess. The shipping weight of this monitor is 22.8lbs. Minus the packaging, that puts the monitor in the 19-20lb range (11kg). The setup was easy. It was maybe four steps. It is sturdy, and the gas spring has plenty of strength. The mount allows for adjustment in all directions: rotation, tilt, turn, and height. It will rotate vertically, for portrait orientation. It mounts either by edge clamp, or by drilling a small hole through the desk and bottom clamping. I chose edge clamping. It holds just fine, and sits discreetly off to one corner. I finally have my desktop back! Great item. Great stand.

I had just recently upgraded to a 34" monitor and was looking for away to add two peripheral monitors to the setup. I wanted a monitor mount that could fit to the side, but also above and behind the main monitor and this accomplished the results flawlessly. Having installed other monitor arms before, the ease of installation for this one was swift and easy. The arm is steady and strong and provides many different angles and movements. I highly recommend the product for its quality, easy setup, and functionality. This adjustable monitor arm should cover all your needs without worries.

I bought 2 of these one in feburary of 2024 and one in august. Both are still stable and snug, even through earthquakes. I bought the Dual arm, but found that It was easier to just use it as a single. Once you adjust the tension properly the monitors sit right where they need to. Some shoddiness on the plastic pieces on the clamp as the cable managment just pops off if you bump it wrong, but otherwise a solid product. I am using the clamp mounts. Setup was quick and painless. I am using them on a 27" and a 19" monitor. The dual mount is on my 32" samsung which is lighter than the 27". None of the arms have slipped or bounced out of where I put them and all of them move and rotate if i need them to. Would buy again. Would recommend to others.

If you share your work station and need to be able to adjust your monitor quickly & easily, then this Monitor Arm is not for you. However, if you are like me and do not need to readjust once you get it set, then this Monitor Arm is perfect - especially for this price! I found the Huanuo Monitor Arm to be very well made - in fact I was surprised at how well made considering the relatively low price. It came with clear instructions, and was fairly easy to install (in my case I had to drill a hole in the desk because my desk would not allow a clamp style install). Additionally, it came with all the hardware and tools you will need to install and setup - (except of course a drill & bit). The arm allows tool-free adjustment of the tilt left to right and to bring the monitor forward & back, but the height and tilt top to bottom require a hex wrench (provided) to adjust.

This is my first monitor arm purchase. All the parts of this arm work very well together. Easy to clamp it to my table. I'm using it with an ASUS Proart 27" monitor. I like the monitor to sit low near the table surface, and this arm works for that. Adjusting the monitor position is smooth. The package includes multiple Allen wrenches, screws, washers, and other things. Cable management was a breeze for me, and not an issue. I laid the cables on the arm, but there are cable management routes and clips on the arm (see the picture). Keep in mind, when you look up the weight of your own monitor. The first weight you see might be the monitor and stand together. Find the weight of the monitor alone. It will be lower. My Proart 27" monitor is heavy because of the features like USB hub, but it's still only 10.65 lbs, which is well below the max weight for this arm.

I've developed some back issues and need to be able to work standing. I started looking at motorized sit/stand desks and stand desk converters, which all seemed over-priced, wobbles, and break after some time. This adjustable mount is a very economical alternative at $38. I'm 5'8", and it raises enough that I can view my monitor standing. My head is slightly tilted down, which is comfortable for me. If you're taller though, it may not work as well as a stand-up monitor. Actually, I would not recommend it for someone taller than myself if you're trying to achieve a stand-up solution. I bought a mouse/keyboard riser as well. The unit is very sturdy once it's all in place - raises and lowers easily after adjusting the tension. Only thing with the assembly is that the screw holes which attaches the clamp to the riser was not threaded on my copy. I'd recommended using one of the screws to thread each hole before assembling, for sanity sake. I added one zip tie, which probably is not necessary. The built-in cable management is awesome! Very happy with this unit. I'm curious to see how long the gas piston is going to last.

Really happy with this! Great quality monitor stand! Honestly, I installed it myself without needing any help. The manual was simple and the whole setup process felt pretty intuitive. I bought it because I didn’t want to sit all day, but also wasn’t ready to drop $300 on a full electric standing desk. This + a laptop stand pretty much gave me exactly what I needed. It’s not perfect, but it’s super practical—and it freed up a ton of space on my desk. (That might not be super obvious in the photos, since my IKEA desk is pretty small.) Also, don’t be alarmed by how heavy the package is, it’s solid, and definitely worth it. Highly recommend!

Fácil de instalar, robusto, bonito, útil. Definitivamente buena relación Calidad-Precio.

I use the arm fully extended and attached near the top of the post. Sturdiness depending on the desk that it's attached to, the assembly will move a little when adjusting the monitor but otherwise I don't have any concerns with it sagging for my 27" monitor. Due to my home office desk set up, I adjust the monitor 2-3 time a day. When the hinges and gas spring are set properly, the arm is easy to move and it seems like the arm will last me a while. I have the back of my table against a wall and the arm folds nicely so I don't need space behind the table to accommodate movement. Overall, I am very happy with the value for money, it not as fancy or sturdy as the very expensive dual arm set up at my work place but I find this easier to assemble and adjust. Also, compared to the dual monitor arms, I prefer having separate arms for each monitor because the distance between the table clamps can be moved to get better range of motion while maintaining alignment of my monitors.

The price was right, and installation is easy, but the build quality is poor. If you need an inexpensive and poorly made/low quality stand, then this thing will work for you. The adjusting screws are difficult to fine tune and don’t really work that well. The only thing good about this item is the price.

Top

Buen producto y te libera mucho espacio de tu escritorio. Yo lo puse con un monitor de 27 pulgadas y funciona muy bien