Premium 1/8 th Inch Thick Acrylic Plexiglass Sheet (Clear, 6" x 8")

Cutting by hand is tedious. Saber/jig/circular/scroll saw is easy. However on a laser is a easy/peasy and by far the best way to cut. I use a 40w co2 laser. I've easily cut 1 x 1mm pieces. Usually small pieces but some of the illumination engraving illuminations designs are having great outcomes with this product. There is an odor when cutting/engraving at high power - one would have to cut very slow and very high power to get flame. Not sure why one would use that type of setting, but. Obviously air assist (for me) alleviates this issue.. Acrylic will also bend flame etc with high temps. I have not experienced any of the bending or flaming with my use of the product. If I want bending I use a torch and then at times I will get a flame up. I always keep this item from this vendor on hand. No association with seller.

After searching the website of a local plastics place, I decided to see how much plexiglass was on Amazon before trying to find the time to get to the store in the middle of the day. This was priced cheaper and for more, so I figured it was worth the risk to buy a couple sheets and see how it turned out. This is awesome. It's durable, the plastic cover is well stuck, so there's no accidentally removing it, which is perfect. A little info for those who don't deal with plastic like this much: - It scratches. It's plexiglass, not real glass. It scratches if you don't use a damp cloth to clean it or if you run something across it. If you're looking for something that won't scratch, I recommend looking for a different type of plastic. - You need to use masking tape as well as the plastic cover if you want to be 100% certain to keep the plastic in tact while cutting it and prepping it for your use. - If you don't want the sharp edges after you're done cutting it, sand it with a fine sand paper, then run a torch down the edge. That will smooth it down. Do *not* leave the torch in one place, as it is plastic and that will melt it. My sheets were both 12x12 exact. Overall if you're looking for an inexpensive piece of plastic to do a project with, this will definitely do the trick. If you take your time and take precautions, you will be happy with the end result. If you rush or take shortcuts, you will not be pleased.

I work in an amusement park in Eastern PA. A few of our ride operator panels were old, faded, cracked, and looking pretty bad. Ive purchased 3 of these sheets (Blue, Green, Red) for three different rides. They cut and drilled nicely for the switches and buttons I had to install. Panels look light years better now with the new Plexiglass, buttons, and labeling. Very satisfied

I had one slightly dinged corner, but otherwise this clear acrylic sheet worked just fine for mounting a piece of artwork after cutting to size (bye bye bad corner). Arrived with blue protective tape on either side. Very clear and easy to clean; be careful not to scratch. I wore disposable cotton cloves while handling and only needed to clean a small smudge afterward. An excellent cutter/scorer is the OLFA 1090486 PC-L Plastic/Laminate Scorer, available on Amazon. I hesitated to spend more on it but buying a cheapo one is a waste. Also check out OOK 50614 Blue Steel Pro Nails for mounting.

Needed clear plastic to cover a desk we were going to be writing a lot on. Read about all sorts of different hard surfaces from many different sellers; it was impossible to find a product that hadn't been delivered already chipped or that didn't suffer a disappointing scratch within the first week. But for us... + Delivered securely. Taped on both sides to protect, and edges contained securely. + No cracks, perfect corners. + Has held up well, no deep scratches. We keep a laptop on one half of the Plexiglass, and write on the other half. Happy with it and planning already to order a custom sheet!

Good quality acrylic and came with paper backing. Was able to cut on my CNC router just fine. I did not experience any issues with the plastic melting. Not the most cost effective piece but arrived quickly.

This worked well for an odd project. I needed this to cut down into 1” x 1” squares for buttons on a costume. I had some issues with it shattering/cracking. Once I got a plexiglass knife (it channels the waste out) we were cutting perfectly. This is another item I couldn’t find local in small economical sheets.

I have been engraving on acrylic sheets a lot using my CNC. I needed to do a test run on an inexpensive sheet before engraving a picture on 1/4 inch acrylic sheets that I have purchased from another company and have been using with great results. The test run was at 15 inch per minute feed rate and at 30000 rpm as I always do to engrave acrylic. I found this sheet on Amazon and then I saw the Amazon banner that I had purchased it in 2017 (thank you Amazon!!!) so I looked in my pile of sheets and I found it! Unfortunately when I ran the test run, it was melting with every pass. I gave it 3 stars because if you are going to use it for making a clear window, it would serve you well. Attached are 2 pictures, one of this sheet engraved (I stopped it half way through the job) and the second is from another pattern I engraved on good quality acrylic where you can see that it did a clean job. Both jobs were done at the same speed and feed rate with the same ball point bit.

misleading picture and a way of advertisement just 1 white sheet with fake colorful several ones. This leads to wrong purchase. Not worth what was received

I have bought acrylic and polycarbonate sheets multiple times (most do not claim to be "premium") and this is the first I've received a piece with rough jagged edges (on one side). That does not work for my purposes. It looks like a DIY cut instead of a professional/factory cut.

Very good quality, seller communication good

Great quality, very transparent. Dry erase markers worked fine, even the red colour. Package is very protected for shipping.