🔩 Split logs like a pro with precision and power!
The RuggedMade 11 GPM 2 Stage Hydraulic Log Splitter Pump is engineered for efficiency, boasting a powerful 11 GPM flow rate and a robust 3000 PSI pressure rating. Designed for compatibility with 5 to 35-ton log splitters, this pump features a 1/2" shaft diameter and a 1.375" shaft length, ensuring a perfect fit for your needs. With a lightweight design of just 8 pounds and compact dimensions, it's the ultimate tool for any serious woodworker.
| Brand | RuggedMade |
| Material | Aluminum |
| Product Dimensions | 5.5"L x 3"W x 4"H |
| Power Source | hydraulic-powered |
| Item Weight | 8 Pounds |
| Maximum Flow Rate | 11 Gallons Per Minute |
| Manufacturer | RuggedMade |
| UPC | 758576970882 |
| Item Weight | 8 pounds |
| Is Discontinued By Manufacturer | No |
| Item Package Quantity | 1 |
| Batteries Included? | No |
| Batteries Required? | No |
J**N
this work great
part was perfect an a great deal compared to local stores
T**N
Works as advertised. Note that the inlet barb is 1 inch. Original equipment inlet barb was 3/4 inch
Pump was installed on a log splitter. Pump works as advertised. Note that the inlet barb on this unit is 1 inch diameter. The original equipment inlet barb was 3/4 inch, so I needed to get an adapter, found at my local auto parts store. Drive shaft was slightly longer than the OEM pump shaft, so the lovejoy connector had to be seated deeper on the motor side.Note: if you are working on a log splitter, you might want to take this opportunity to install a full flow ball valve between your hydraulic fluid reservoir and your oil filter, so you can shut off the reservoir and change out filters (and if need be replace your pump again) without having to drain out 5 gallons of hydraulic fluid. Just a thought!Installing the ball valve: you will need 2 3/4 inch close nipples and a 3/4 inch ball valve, and teflon tape for the threads. I used tape rated for black pipe and gas. You may have to adjust the length of your inlet hose as well.
A**R
Figured out that the old pump is still good. Check the slot for the keyway
This pump is working well after 4 ricks of wood. Figured out that the old pump is still good. Check the slot for the keyway. May have slipped on the coupling. This pump only has a half moon keyway where as some others are full keyway. Keep an eye on the set screw on the keyway and reset it with locktight every few months
K**N
It worked perfectly
We bought a used wood splitter that needed a motor. After installing it worked like a new one.
T**4
fit as described if you replae other fittings
worked great for a while. Do not buy this pump unless you want to replace the hose and fitting on your wood splitter. I purchased one and it lasted not quite 3 months. The threads blew out because the housing is made of aluminum and it requires to use certain fittings. Poor Product
B**H
Well made
Replaced pump on 20 ton mtd splitter. Perfect fitment. Seems very well made. Exceeded expectations.
A**R
it does what it is supposed to do
this pump works great on a Troy-Bilt log splitter but you will have to get an NPT adapter because the Troy-Bilt fitting That goes to the high pressure outlet is not NPT. You can get the adapter at any Hydraulic store.
C**A
Seems to be a good thing after 1 use take a more time to rate as to the quality of this product
Wood splitting
Trustpilot
1 month ago
3 days ago
