SEYMOUR 620-1415 Industrial MRO High Solids Spray Paint, Gloss Black , 16 Ounce (Pack of 1)

Esto es lo máximo que he comprado. Siempre tengo de repuesto en la casa debido a que tengo un carro negro. Tiene mucho brillo con la debida agitación.

The media could not be loaded. So just to clarify it’s all about the prep work! Can’t stress that enough! Clean any and all grease, dirt and whatever. Sand then primer, sand again clean again! Then paint.This stuff is seriously awesome for paint in a can!? I mean it’s not a flawless paint job by no means. But it’s damn good for not spending 3k to have it painted! Few hundred bucks cause I did get the 2k clear and that really made all the difference in the world I’m super happy with the results and btw tip u HAVE to let the surface dry I mean throughly dry before painting if not u will get wrinkles in the paint immediately when u spray bondo absorbs water so if u used it let it sit for while after cleaning the surface then use tack cloth before paint. Go light first coat then spray 2-3 medium coat should be money after that

I've used MRO flat black and yellow paints and I've been impressed so far. The paint coverage is excellent. After 2-3 coats you have a good looking and durable finish. It does take a surprisingly long time to cure, however. It dries to the touch in a couple of hours, but the finish is still pretty soft and will scratch easily for a day or more. I would err on the side of giving it a weak to cure before putting it through any hard use. I attempted to bake cure in a dehydrator (sub 200 degree F temperature), but that results in wrinkles in the finish, so I do not recommend that. I swear that the yellow has a hint of banana smell Overall, the paint works well.

This Seymour MRO is good paint, it's not as spectacular as i was expecting it to be. Coverage is good but not excellent, better than a rustoleum industrial can though. The finish is smooth and is really helped by some polish after it fully cures. The worst part about this can is the spray tip, it sprays a decent fan, but is stiff and uncomfortable as all heck. Swapping tips or using one of those 'paint gun' type attachments may be a decent idea. I'm happy overall with this paint, it did what I wanted it to do and the color is exactly what I wanted. (In my picture the 'grit' in the dimples is intentional and has nothing to do with the Seymour paint)

It sprays very evenly and it doesn't have too much of a strong smell too.

"I listened" to the Semi-truck commercial use Guy's review which is why I bought it. I've used 2X gloss black for years & couldn't figure out why I never liked it.Against Gloss-Black-powdercoating, Rustoleum 2X gloss black has too much of a dark gray primer tint to it.If yon't believe me, YOU can test it out without a fresh looking powdercoated frame.Any clean sheet metal will do. The test will cost You less than $20 in paint. Then mention me in your comments. Haha. At least you'll know if you are happy with your current choice of paint.I am restoring a 1960s British 750 Enduro, whose frame has "hours" on it after it was freshly powdercoated maybe 25-30 years ago, (pre-chinese made painting materials or, or EPA regs back then). My family has owned the non-running bike for over 20 years, soon to be on the streets.THIS spray PAINT matched the color & cleanliness exactly to the existing non scratched powdercoated areas of the frame. There was only one small area on the low right side of the frame that had issues from small rock chips. Gone now.Highly recommended!!!

Love this company. My photos are of the dark green color atop the primer. I use it on cast iron and also on this old rusty bench I picked up at the dump. The primer levels pretty freakin smooth. As does the paint enamel. Yes it takes a while to dry, be patient. I’m in the south so I paint it in the evening outside to let it dry overnight, then let it cure in the blasting hot sun all day. It sets hard as a rock. The primer & paint in the can does go a long way, thankfully, and didn’t get clogged. Nice even spray. Adhesion was fantastic. Everything I repainted was either an antique or rusty, and while I did spray the metal with the power washer before hand to remove loose old paint chips & dirt, but I didn’t sand smooth or anything like that. I don’t mind texture on antique cast iron. My intention for buying this paint was protection & durability. And this company provides both of those things. I really am enjoying the dark green paint color. It dries a little darker than when initially wet. Both pictures I posted are the same dark green color, the bench is in direct sun, the porch posts I’m making into an arbor is in the shade when I took the photo. It is lively, elegant, and to me has more appeal than black- Especially on outdoor metal

The paint said it is flat but it is more like satin or even a bit glossier than satin. It also scratches really easily. I was hopeful it would be better than rustoleum but it is not at all. Rustoleum flat is actually flat and it is much harder to scratch. I bought two cans and am unable to return the one I did not use. I hate to throw a full can of paint away but it is not worth using.