70cm Premium Sleeved 3-Pin 1 to 5 Addressable (ARGB) Splitter Cable (White, F04-15AS70-W)

As several other reviewers have mentioned, this cable is way too loose. The ARGB fans and case LED all have connectors that "snap" in place to hold it on. None of the 5 female connectors on this cable snap into place, leaving it way too loose.This is actually a bigger problem than it might sound initially. Mine actually bent the motherboard header pins as the weight of the cable pulled it off. Thankfully I was able to straighten the pins, but it was harrowing work, thinking I might break a pin and render a brand new motherboard's ARGB header useless.

I got 1 of these at first and was able to hook up all the 3-pin aRGB lighting I had. It was super easy! Just plug one end into the 3-pin point on your aRGB ready motherboard and then plug in all the lighting. Viola! I was so impressed at how easy this was that I got more lighting. I then got more of these cable splitters. I daisy-chained 3 of these splitters and now everything I have on my PC lights up; Video card Brace, 2 NMVE Drive Heatsinks, Processor Cooler, and 7 fans! I set all my lights to rainbow and then it literarily looked like a Unicorn throwing a Rave! Of course I toned all that back as to not be a ATX-Full tower of glitter, but knowing that I could if I wanted to is pretty amazing... and that's all because of these cables! (I've ordered more again!)

The 1 side of the 1 to 4 connection fits very loosely and instills little confidence that the connector will not come off. I expected a tighter fit as all other connectors on the adaptor. The fit snug on the pins but the 1 cable was very loose and disappointing.

I have three ARGB fans and only two headers on my motherboard. I thought this would be better than buying a 2-way splitter or an expensive fan hub and give me room for more fans in the future. Wrong. Plugging in three fans and no lights come on anymore. Plug in two fans and only one works the other is solid green and I'm not able to change it with AURA sync anymore. I just ended up buying a Coolermaster hub from a brick and mortar to get my ARGB all functioning again

I installed 2 of these, one in my wife's computer and one in my own. They both worked.I removed the one from mine because my friend needed it for a new build and he only had one 5v ARGB header on his mainboard... partway through the testing we discovered there was a control issue with the ARGB software. After about an hour of troubleshooting, I decided to randomly wiggle connectors for this splitter, and there we found the source of the issue. These seem to work great so long as you don't have to use the included couplers. Unfortunately the couplers did not provide solid enough connection and ended up just causing all kinds of connection issues. I could wiggle the connected cables back and forth and would get all kinds of noise feedback through every fan/LED in the system.Other than that, the connectors themselves seem a bit loose, and several of them I secured with some cloth tape to keep them together. I would give this 4 stars, because they did mostly work, unfortunately, I needed the couplers and they didn't.

After wiring up a bunch of stuff for my kid with RGB strips, I have come to hate these pin and socket connectors. The three pin versions for ARGB lighting in his computer didn't much change my opinion. The vast majority are built poorly and make the worst of an inherently poor design. These ones however give a nice positive click on insertion of the pins and have solid clamping force on them. The cables are a bit chunky, but fit in the cable management space for my case just fine. It's a simple but solid product that worked as expected, which is unfortunately exceptional in this product area.

Installing a new case with 12 rgb fans and a front rgb strip. 2x fan/rgb controllers and seperate hub. Splitter made install easy. Connections are slightly loose but work well.

Works exactly as it should. Cables connect easily and are NOT loose like some other brands. Five male to male adapters are included. Cheap solutions for motherboards with only 2, 3-pin interfaces. The only drawback is your rgb software will see whatever lighting you have connected through this splitter as the same device. To be expected but fyi.

Couldn't have completed my build without this cable!Remember this review is for the 3 Pin ARGB header on your motherboard and NOT the 4 Pin RGB header on your motherboard. 3 Pin is the newer Addressable (Addressable means each individual LED can be a different color. Non means all the LEDs have to be the same color at once.)Also 3 Pin ARGB is 5 Volts... 4 Pin is 12 Volt so make double sure your buying the RIGHT cable!Be careful when ordering and be sure to select the 3 pin ARGB or the 4 pin RGB cable as both are different and some motherboards don't have the newer 3 Pin ARGB header. Also don't try to plug your 5 volt ARGB lights into the 4 pin 12 volt header as you'll blow them.

{"videoWidth":0,"videoUrl":"https://images-na.ssl-images-amazon.com/images/I/A1dduIAbGGS.mp4","clientPrefix":"vse_reviews_desktop_r2z2toaekyrozv_1635231629012","awaConfig":{"requestMetadata":{"marketplaceId":"ATVPDKIKX0DER","clientId":"VSE-US","method":"cr_inline_review","requestId":"D62BJNVZCM606DFV6V54","pageAsin":"","sessionId":"139-3191261-1242734"},"useUpNextComponent":false,"shouldDisableControls":false,"initialVideo":"R2Z2TOAEKYROZV","shouldPreload":true,"clientPrefix":"","captionsOffText":"","isChromelessPlayer":false,"useAutoplayFallback":false,"sushiMetricsConfig":{"isRobot":false,"clientId":"VSE-US","videoAsinList":"","weblabIds":"","eventSource":"Player","sessionId":"139-3191261-1242734","refMarkers":"vse_reviews_desktop_R2Z2TOAEKYROZV_1635231629012_ref","placementContext":"cr_inline_review","marketplaceId":"ATVPDKIKX0DER","isInternal":false,"endpoint":"https://unagi-na.amazon.com/1/events/com.amazon.eel.vse.metrics.prod.events.test","requestId":"D62BJNVZCM606DFV6V54","customerId":"0","sessionType":1},"ospLinkCode":"","languageCode":"en","version":"","isVideoImmersivePlayer":false,"airyVersion":"VideoJS","disabledViewIds":["replayHint"],"languagePreferenceStrings":{},"customerId":"0","isReactFactory":false,"closedCaptionsText":"","enableDelphiAttribution":false,"containerId":"vse_reviews_desktop_r2z2toaekyrozv_1635231629012-player-24df13b9-1483-4e68-9ae7-cafce696b521"},"imageUrl":"https://images-na.ssl-images-amazon.com/images/I/A1nLIEr1ehS._SY256.png","sushiMetricsConfig":{"isRobot":false,"clientId":"","videoAsinList":"","weblabIds":"","eventSource":"Player","sessionId":"139-3191261-1242734","refMarkers":"vse_reviews_desktop_R2Z2TOAEKYROZV_1635231629012_ref","placementContext":"cr_inline_review","marketplaceId":"ATVPDKIKX0DER","isInternal":false,"endpoint":"https://unagi-na.amazon.com/1/events/com.amazon.eel.vse.metrics.prod.events.test","requestId":"D62BJNVZCM606DFV6V54","customerId":"0","sessionType":1},"mimeType":"video/mp4","isMobile":false,"videoHeight":0}Video Player is loading.Play VideoPlayMuteCurrent Time 0:00/Duration 0:00Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions and subtitles off, selectedAudio TrackFullscreenThis is a modal window.  Muy buen producto hace su funcion correctamente funciona para meter mas ventiladores rgb aura sync en mi caso muy satisfecho

Es un producto que tiene buena calidad en su construcción y no tuve absolutamente ningun problema con el. De hecho incluyen 3 peines para que puedas conectar los 3 cables si esque te encuentras con que las conexiones o son macho o son hembra...te quitas de problemas con estos peines.

Works exactly as it says it does. It splits a 1 female argb connection to a 4 female argb , as well as has the pins to convert to all male connector. If u only have 1 argb connection on your motherboard and u need more for your lighting or argb fans , than this will turn a 1 to a 4. Its all black and really nice quality. I would highly recommend and cant beat the price either!

No tuve ningún problema, conecté 3 ventiladores y 1 tira aRGB y los detectó sin problemas. Me sorprendió que la tira la registró como extensión, lo que mejora la calidad de los efectos que puedas darles. Totalmente recomendado.