Storage Logic Queen/Full/Full-XL Foam Mattress Vacuum Bag for Moving, Vacuum Seal Mattress Bag with Straps

This bag works quite well, as long as you have the right vacuum for it! I have purchased and used this exact product twice so far, because I end up puncturing it every time I use it (more on this later). The first time I used it, I tried using my regular household vacuum cleaner (Miele canister vac). It worked a little bit, but the vacuum quickly overheated and shut off. Most household vacuums aren't meant to operate at maximum suction without a lot of air flowing through them (because they rely on the incoming air to cool the motor). The second time I used this bag, I used a large shop-vac (Rigid brand vacuum). This worked a LOT better and didn't suffer any overheating issues. If you want an even better vacuum, I have some more info later on. For most people, using a standard shop-vac will do the job nicely. Once you have pulled the vacuum, fold the mattress over and strap it up. Having a second person to help here is very useful -- one person sitting on the mattress to keep it folded while another person straps it worked very well. I used the included straps to hold it in half, then used some ratcheting straps to tighten it up even further. Note that if you use ratchet straps, put a piece of cardboard or something like that between the metal ratchet body and the plastic bag to keep from puncturing the plastic. The attached image is of a Purple 3 mattress under full compression. I think the compression is just as good as the factory does, but I didn't have enough leverage to actually "roll" up the mattress and could only fold it in half. Its still plenty small enough to fit in the back of a normal station wagon/hatch/SUV. Once your mattress is vacuumed and folded, you really should add some extra protection. You can wrap the mattress in mover's plastic wrap, or find some other heavy duty plastic/tarp to wrap this in. The vacuum bag punctures VERY easily. This happened BOTH times I tried moving with this. It's not the end of the world, as long as your straps are tight -- the straps will keep the mattress MOSTLY contained even if the vacuum is lost, but it will be a LOT more difficult to move around without the vacuum intact. Note that I punctured this even though I was trying to be very careful. I was moving my mattress with a helper down a short walkway between my door and the car. The mattress was very heavy, so we stopped once to put the mattress down and take a quick break. The bag touched a grain of sand on my walkway (yes, just a grain of sand), and this caused a minute puncture. It was enough that I could hear it leaking, but I couldn't stop the leak with duct tape or anything like that because of all the creases in the plastic. Within 2 hrs, the mattress bag vacuum was completely lost. So if you want the ultimate vacuum, I had good results using a four-stage diaphragm pump with a shop-vac as a roughing vacuum. Most people won't have access to this equipment, and probably won't need this level of vacuum to be honest. My shop-vac took the vacuum down to about 650 torr. I was able to attach a diaphragm pump using an NW25 fitting. If you remove and use just the O ring from an NW25 centering ring, it will fit over the inlet port nicely and creates a good seal once a vacuum is established (see photo for more info). I took it down to 40 torr and said "good enough" there. The majority of the compression had already happened with the shop-vac -- the difference between 650 and 40 torr was noticeable, but not enormous.

Worked really well. Listen to the directions when it says to wrap it after because it does in fact tear pretty easily. BUT if you follow the directions, this thing works perfectly and makes moving a huge bed a breeze.

Worked for a california king lucid hybrid mattress with some springs inside. Compressed from 10in to 2.5_3 inches. Was able to roll up and strap into a cylinder for easier storage. Vacuum port could be sturdier wants to suck up the plastic into the port. Otherwise perfect product. Took about 5 mins to vacuum seal. 10 mins to put bag on.

Vacuum sealed my king size mattress it shrunk it very well and the straps are super good it did what was intended to do it didn't inflate back up after a while it works so well I was able to take it with me on the passenger side of my car for 23 hour drive back to my home from traveling to visit for the holidays I had to take my mattress back to my new place. Its also reusable so that's good.

the bag itself is nice, seems to hold the vacuum nicely but straps are not strong enough. It comes with 4 straps, they break super easy, so don't use them if you want to pack your mattress really tight and nice. All these straps can do is to stop it from unfolding.

A life saver! I need to move my foam mattress and moving company gave quote that was more expensive than the actual mattress cost so I decided to this bag a try. Took me 3 sessions with the vacuum cleaner ( I was worried not to kill the vacuum cleaner) but it worked! With every fold I was putting something heavy on the top to make the mattress stay rolled. I also ordered heavy duty straps separately in order to hold it tight during transportations. The only concern is the depth of the bag. My mattress was king size 14” thickness and it was a bit challenging to zip it, definitely need 2 people to do it. If the bag would be deeper, would be perfect and much easier! Otherwise it saved me a lot of money and it fit in a regular car perfectly.

We purchased this item to move a queen size 14" foam/latex mattress. To prepare, we had a shop vac, shipping tape, and 4 heavy duty kayak straps (we did not use the binding straps included as they would have not wrapped around) plus 2 ratchet straps because I envisioned a leak springing in the car and having an issue!. We pulled the "zip loc" opening apart (use the slides to close) and slid it around the mattress, like putting a duvet cover on a comforter. We unscrewed the cap and placed the shop vac hose on the opening and turned the vaccuum on. In less than 10 minutes later, the bed was compressed; we also sat on the mattress as it was compressing and I'm not sure it helped or not, but it seemed to help with the mattress edges. Then we folded the mattress into thirds and applied the straps tightly without puncturing the plastic (we also applied shipping tape where the ratchet straps went for extra security). The weight of the mattress was cumbersome, but two of us wrangled the mattress in the back of a nissan rogue and moved it to its new home. Only when we arrived to our destination and were carrying it up the stairs did we spring a leak; not bad, and the bed stayed compressed while we turned the mattress end over end up a flight of stairs to its new home. We removed the straps, unsealed the very strong zip loc seal and were able to slide it off; we will keep it for reuse even if just to transport another mattress. I would recommend this product.

This was a hope and a prayer purchase because we were moving a long distance with our memory foam in weather, and we hit all the weather rain, snow, everything in that trip. This mattress cover worked GREAT for that move, Everything was dry and easy to transport. It worked so well we used it to bring our bed camping in a later trips and it is still holding strong, no leaks causing reinflation during transport and I forsee us using it many more times because the bag is showing no signs of breakdown as of yet. Now we did read the instructions and we did wrap the outside of the rolled up mattress during transport as it recommended. I have a queen memory foam but I purchased a king bag for ease of use and it works well even for an undersized mattress, I didn't need to buy the size up as the sizing looks to work just fine for the size intended, but I'm happy I did buy the size up it just makes it easier for us. A regular vacuum works just fine no shop vacuum required. The valve is awesome if you pull the vacuum off during deflation at anytime it doesn't allow reinflation. I did end up using the first bag I bought ( queen size) to vacuum seal our giant bear(Costco giant teddy bear) for the same move it worked so well. For us it was a one-person job putting the bag on the mattress and even vacuum sealing it down, rolling it up and putting the straps on to hold the roll was a two-person job. And in sock feet as per instructions walking slowly on the bag did help deflate it more than the vacuum could as it was getting vacuumed down. It didn't cause any damage to the bag walking on it, a note we didn't start stepping on it until the vacuum had the mattress almost all the way deflated. I absolutely recommend and have recommended to friends, I mean who couldn't use a giant vacuum seal bag LOL

Bought a bigger size since my mattress is 160 cm wide but thin. Could probably have gone with the smaller size as well. Worked really well so far. Hope I won't experience any air leaks.

Bon produit, mais le vendeur devrait indiquer les dimensions maximum.

Funcionó perfecto para mi colchón Luuna tamaño matrimonial (MX), la bolsa es más grande pero aún así sirvió. Pude transportar así el colchón en mi coche sin tener que pagar mudanza. Recomendado!

Was moving house and needed to move my mattress. The was so easy to use, I did it all on my own and only needed help carrying it up stairs. As a single mum I had to use my mum yo watch my baby while I was packing and then she helped with carrying up stairs. I wasn't able to roll it into a sausage, was more like a very fat folded wrap. It was extremely easy to use. Be warned if you are doing this alone it is like a mini work out :)