Full Tub Body Mount Rust Repair Fit for 1997-2006 Jeep Wrangler TJ Frame

Fit great very strong what i needed!

I have used these in the past and will continue to use these very easy to install if you have basic mechanical skills and can run a mig welder . I put a video up on The Delaware Ranch on you tube explaining how I installed these. They are designed to slip over top ypu old ones. I recommend cutting out all old rust clean and paint with a good high quality paint. Such as Mastercoat silver rust paint . That also can be bought on Amazon

I like the way it fit, just wish it used same threads as stock jeep

You will need 4 new bolts. I'm including the bolt sizes in the pic.. you're welcome. 😜 These are much thicker & better quality than the body rails that came on my TJ. They were fairly easy to install, I'm not a welder but I have a cheap Mig welder & was able to get these in pretty good.

This is a good replacement. Bolt holes are not exactly correct but can easily be removed and rewarded.

These are complet Chinese garbage. I realize they had sent 2 passenger side pieces after I had the first passenger side welded on. Save your money. The metal is made of file cabinet thickness. I cut them back off

I love the way these are built. Heavy enough steel to last and never have to do this repair again. Well primed and decent welds. Slips over the existing tub rail without much modification to OE tub rail. Well done!

First of all, the threads in these are different than stock. Stock is 1/2”, these are m12x1.75. So prepare to spend another $20 for long enough m12 bolts. Other than that, the flanges to weld to the tub don’t reach the whole way to the tub so there is a 1/4 gap between the flange and tub. I used a hammer to bend them up to contact the tub. If you are handy you can make them work, but probably not the best option.