KVM Switch 8 Port VGA

I had the need for a 8-port USB switch between multiple computers. Most dedicated USB switches are 4-port so I knew I was looking for a unicorn solution. I thought I would try to use this 8-port KVM VGA switch and just not connect the VGA cable. Pros: - using as an 8-port USB switch only worked perfectly, I just never connect the VGA cable - no beep when switching ports - I see this as a pro - left/right brackets included to mount in a 1U+ rack - I used a 1U rack to mount the switch under my desk, worked perfectly - I didn't realize the switch is actually 2/3 the height of a 1U rack row so I have a 1/3 space which is OK - port switching isn't faster or slower than any other USB switch I have used in the past - 2-3 seconds to switch - mine came with a power supply, I am guessing this might help with the switching speed and the glowing active switch red light - USB input ports on the front and back - comes with a full set of 8 KVM cables, amazing for this price point - case is metal, doesn't feel like it will fall apart I am not using the remote, but I tested it out and it works. With the buttons not marked (i.e. PC 1) I would have to remember which button is for which computer. Not a deal breaker, but I like pushing the marked buttons on the face of the switch.

It was time to replace our old rack mounted PS/2 based KVM switch. Using PS/2 to USB adapters with the newer servers had problems with connections from time to time. While we have virtualized our network, we like to have physical access to our servers via a KVM switch just in case. I ran across this 8 port KVM switch and the pricing was very attractive. I was a bit dubious but decided to give it a try anyway. It has worked extremely well. It works with our servers and our surveillance system without any issues. Each port has its own light on the front of the KVM switch so you can tell at a glance which KVM port is active. I did have to buy a 10 foot KVM cable to reach a device but the vendor at least had them readily available. They also have a 16 foot version as well. I also had reason to contact the company for support several times and they usually responded within a day to my questions. One of my questions was about the cabling for the remote controller which is mini USB to mini USB. The 6 foot cable was too short to reach where I wanted to put the remote controller. They told me that it was a standard USB wiring. It is very difficult to find a longer mini USB to mini USB cable, so I finally bought a 15' USB A to mini B cable along with a USB A to mini B adapter from Amazon. This made the total length about 15.5 feet. Works like a champ and we no longer have to get up from our server workspace to change ports on the KVM switch. One previous reviewer said using a cable extension for the remote controller did not work for him and even claimed it must be a custom cable configuration. It is a standard USB cable. The thing that caught my attention was that he was trying to use a 20 foot cable. I think that is beyond USB specs for cable length. Beyond about 16 feet, you need a USB cable with a repeater. What makes this a five star item? *Great price which includes the KVM cables *Quality - works well with no problems so far *Support is responsive to questions

This works as expected. This was easy to setup. I was able to mount easily in my rack. I was able to connect this to an older rack mount keyboard/monitor with ps2 converters. This came with 8 cables which fit my needs nicely. I did order 2 additional 16-foot cables to reach the lowest portion of the rack. The quality of the construction is good. Fast switching time to get the next screen up. I would recommend this product to others.

The product works great, the KVM cables it comes with work very well to carry both USB and VGA signal, while also powering the unit itself. The USB ports to your keyboard/mouse, 2 on the back and 2 on the front, only have minimal power, so if you have something like a VGA to HDMI convertor that requires external USB power it probably won't work. A USB wireless keyboard dongle however works fine. Switching between devices is quick, and works perfectly with an audible click from both the base device itself and the wired "remote". Installation is generally easy, except the mounting bracket ears it comes with aren't quite long enough to allow it to be mounted in a standard width server rack. The bolt holes on the ears are about 1/4 too narrow to reach. Lost a star for that on an otherwise excellent product. FYI if you're looking for a KVM device to access BIOS/UEFI setup or a console on a headless server with only VGA ports, this is the device for you. VGA to HDMI convertors are notoriously bad at unusual resolutions (like headless consoles and pre-boot prompts), and an HDMI KVM would have to also be able to handle those weird resolutions. With this KVM you only have to find one working convertor at the user end to make itbwork, and don't have to worry about multiple at the server ends.

Solid and dependable easily into my rack even gives a little bit of space for Cable management since it only uses 2/3 of a U

Switch works well. However, the rack ears for the KVM switch are too short - the mounting holes are spaced only 18.75 inches across instead of the correct 19 inches. Each rack ear needs to be 0.125 inches longer. Secure rack mounting of this switch is not possible with the provided rack ears

I spent hours looking for a multi-port KVM switch. All of the supposedly "good"/"high-quality" ones were several hundred dollars. And, even those frequently had reviews that raised serious questions about the performance and especially about value for the money. When it arrived I was surprised at how well packed the unit was. I was even more surprised that basically everything one needs to install it was included in the box (all of the cables, etc.) The most time-consuming part of the operation was routing all of the cables. After completing the cable hookups I turned all of the PCs on and worked my way through the switches for each one and, lo and behold, they all worked just fine (and still do to this day). My recommendation would be if you are looking for a multi-port KVM (even if you only need, for example, 4 ports), buy this switch (you can always add more PCs or, for the price, you'll be hard-pressed to find a cheaper 4 port only KVM!). Highly recommended! (I bought this KVM with my own money, didn't get a coupon, no incentive for leaving a review other than wanting to help out anyone else looking for an 8-port KVM!)

This unit works as expected. Although I with metal was just a bit thinker gauge, the momentary switches feel sturdy. The unit works as expected in all functions. It is cheap, does what it advertises, and the cable length is sufficient for most applications. I would and probably will purchase this again as long as product lifespan lives to expectations. Little to no noise is produced and the functions work quickly between screens. The brightness of the LED indicators is sufficient although I wish it could be just a bit brighter. Only additional plus would be the addition of an ethernet port for IP style communications and KVM access but that is not advertised nor expected at a product in this price range.

buen producto, buen precio

ürünü uzun zamandır kullanıyorum. işlerimi çok kolaylaştırdı. en kısa sürede tekrar stoğa gelmesini bekliyorum. tekrar alacam.

Ich habe 5 ältere Computer damit eingebunden. Funktioniert seit Wochen ohne Probleme. Sehr praktisch, nur einen Bildschirm und eine Maus verwenden zu müssen. Umschalten geht recht zügig.

Product is very good,

Worked as it descibes,