WinZo Compact One Piece Toilet 22.8" Depth Modern Short Design Dual Flush for Small Tiny Mini Bathroom 12" Rough-in,White (WZ5079)

Makes one wonder why most toilets are so much larger. I have not looked inside the mechanism but flushing really shoots a powerful jet of water to get things down the drain. The bowl area with water is small and I keep a cleaning brush nearby for the little bit of stuff which is left on the porcelain about every 5 flushes. No big deal and should obviate the need for chemical cleaning, which a septic tank doesn't like. Some reviews or videos (I forget) indicate it can be a bit of a headache to install. And my plumber had to move the input water feed line an inch farther away. But this toilet makes our small second bathroom look and feel much larger. Entry and Egress so much easier.

This toilet is great for small spaces. I was remodeling a home and, due to the layout, I wanted compact toilets to allow more clearance in the front. I found these toilets and ordered two of them on Amazon. I installed them both and one had a small leak due to a manufacturing defect. I was worried, but customer service was very responsive and after sending them a few photos of the defect they shipped another toilet for free. Installation is a bit of a pain due to the design of the toilet concealing the bolts so plan to have a helping hand. Once installed the function as well as any other modern low-flow toilet and I've had not issue getting them to flush large loads. They've been in service since June 2023. I will update if my experience changes.

Purchased back in April 2024 and finally installed 6/15/2024 and I have to say my expectations for an Amazon toilet were low. I was prepared to have some clogs, possibly a leak, and to replace if needed. None of those things happened!! The ideas for installation found in other reviews were helpful to my handyman (put on 2x4’s and mark floor and where bolts are with tape to match up when placing). The toilet is solid and sits well, no rocking. Everything seems decently made. The push button to flush is plastic so that’s cheap but my black one looks great. Most importantly, NO CLOGS YET! Its been just over 3 weeks and my boyfriend and I have not had an issue. This is a gravity flush…I was told to get this and stay away from the Symphonic flushing systems for anyone contemplating between the two types. This model uses a 2” flush valve inside fyi, just a note if you are ordering extra parts. I am very happy with it and would recommend. The only thing I am not crazy about is the seat. It is thin and does not have enough support bumpers at front so when you sit it ‘clicks’ as it flexes and hits the rim. This seemed cheap to me so I inquired about a seat upgrade….there is none. So I ordered an extra seat (will Be ordering another as a backup as well) in case this breaks and also, most importantly, added two rubber bumpers under seat near front and that 💯 took care of the clicking and sounds and feels much better. Lastly, just in case this company has any issues staying afloat, I ordered 2 of every replaceable part on it. Extra push button, extra float valve and flush valve and seat. Hopefully won’t have to use them but if I need them, no one will have them in stock in an emergency. Oh and customer service was good, helpful, but not great, I believe because of language barrier. They sent me a free seat replacement when I realized I bought the wrong one. But weren’t very helpful in telling me for sure that there wasn’t a thicker and nicer seat option. Overall, I would recommend this toilet.

Good news is that it is compact and stingy on water use. Less good is that despite a large trap diameter, it can clog just exiting the bowl. Poo also tends to land on the back wall of the bowl, leaving a mark, but the upside is no splash back if it had landed in water on a traditional toilet. The plumber was less than happy installing it due to the small side ports to access the bolts holding it down to the ring- can only turn the nuts a little bit each turn. While elongated, the seat is not the typical dimensions, it is smaller and perhaps a standard used by Toto, per the plumber. He thought it was a Toto toilet. At least the seat is a slow close and sturdy enough. Dual flush buttons come in 3 colors to match your decor - chrome, gold, and black!

We needed a compact toilet and this one fit in our small bathroom. No complaints. Everything worked perfectly fine.

this is nice and small very good for small bathroom but the only you need to beware if the toilet broken you need to pay for shipment back to company I paid $175 for return it's very bad

I got the WZ5079S (10" Rough-in) toilet bowl and couldn't be happier! My situation was, I needed both: A mini toiled + 10" rough-in, which turned out to a be horribly limiting combination! This nice looking toilet has them both. And it's height is just above 16" which is great too. I don't understand the craze with the "standard" height of close-to-18-inches, which in my opinion is MORE harmful to legs than the lower toilets! Due to previous reviews, I was prepared for a hard installation, but it was just of normal difficulty! I didn't have to cut anything with a grinder (!) like a couple of reviewers said, and I think the problem they must have had is that they used some flange with a bigger periphery. Mine was a standard *Clam" flange for 4" pipes and it fit just fine. The toilet has 2 buttons for two sizes of flushes. You can actually see how little water it uses and it's yet efficient at flushing. At that - 2 WIDE buttons! Not the the tiny circle you find in other toilets of this type. The only little downside is - as of today, the seat is attached to the bowl with 2 strange rubber-swell bolts, and seat was not 100% firm. But I quickly replaced them with 2 molly bolts and it's now good, and I'm otherwise so happy with this toilet that there's no way I will take off a star for that.

I needed a toilet to replace a 50yo, 7-gallon toilet in a very cramped half bath. This saves about 3-4 inches of space, which isn't a lot but really matters in this tiny space. The result looks very good. However, my plumber hated the installation. The one-piece design may be good for cleaning, but means the plumber has to lift the entire 95 pounds to set the toilet on the flange. The skirted design means there's no good place to hold it to lift. Oh, it's easy to lift if you are installing it in the middle of the floor and can hold it on the back, but who installs a toilet that way? And again the one-piece design makes it harder because it must be lifted near the rear for balance. Then there's visibility. My plumber says that some skirted toilets are configured so that you can see the bolt holes while lowering them onto the flange bolts. This one is not. He made pencil marks on both the floor and the toilet to line them up, but was not happy that the toilet design made it so difficult. The people designing the toilet should think more about the installation process. The installation cost me at least an extra half hour of plumber's time due to these issues. There's also a flaw in the porcelain surface of the rim. (See photo. The red tape is to help the camera focus.) It's not highly noticeable except in certain lighting, and won't affect cleaning. I did not deduct for this, but I've never seen such a flaw on a toilet rim before.

Great toilet but very shallow and the toilet lid takes up about 2” when sitting and I’m small. Don’t know how to remove lid to make it more comfortable. Anyone know??