BNTECHGO 8 Gauge Flexible 2 Conductor Parallel Silicone Wire Spool Red Black High Resistant 200 deg C 600V for Single Color LED Strip Extension Cable Cord,Model,20ft Stranded Tinned Copper Wire

The BNTECHGO 14ga / 2.5mm² dual conductor red and black wire has thick soft silicone insulation and wire composed of very many extremely fine threads, rendering it extremely flexible. I found it to be a good choice for heated bed wiring on a 3D printer which must pass 12 amps of current in a hot environment while constantly moving back and forth.... sometimes for several hours.This wire is capable of handling the heat, constant flexing and current for hours on end but is only as good as the terminations and strain reliefs. As the original wiring this replaced failed at a crimp connector made with a plain crimp of shallow depth in a tubular insulated connector, I recommend die-crimped "open barrel" wiring eyelets with an extended crimp zone rather than generic crimping of 1-2mm depth in a standard tubular eyelet.Fortunately, Amazon sells a suitable crimper, the IWISS 1424AAlthough this wire solders well, I don't recommend soldering for high current loads as it adds electrical resistance. and causes relative brittleness at the solder joint.

This is really nice wire. Its very soft and easy to work with. Im really glad I used it on my project.

This wire worked great for 24v LED lights. It fit the connectors that easily allowed me to get my cob LED lights in use. The jacket on these is flexible and can allow for separation of the conductors. There is a little work required to separate them without tearing the jacket in the middle, but I was able to figure it out without wasting too much wire. The conductors seem to be working well in my installation requirements.

Pretty good quality wire. Very flexible and seemingly sturdy.

Def 25ft used to wire a set of lights onto my car and very good quality and durability

It’s a matter of preference as to what you want . This is a flimsy wire with a soft covering but tuff .

Very flexible wire. I use it for RC batteries and motors. Solders easy and works great with high current applications.

I like this wire for connecting my radio equipment to the power supply.