SHAPTON Kuromaku sharpening stone Moss # 220 (Very Coarse)

Parfait

Una piedra de grano 220 que come mucho material pero el tacto es muy suave, no tengo nada negativo de momento.

Super Schleifstein zum Abrichten von Hobelsohlen oder gr. Macken in Stemmeisen und co. Zusammen mit den Steinen in 1000 und 5000 bekomme ich so toll geschliffenes Werkzeug hin. Der Anschaffungspreis liegt über anderen jap. Schleifsteinen, dafür ist der Abtrag deutlich geringer zu den von mir bisher besessen günstigeren Steinen.

Very muddy for a shapton. Produce alot of slurry. As most shaptons produce very little.

The kuromaku 220 and 320 are two must have stones for sharpeners. They are fast cutting and slow wearing stones that handle even steels like super blue at 65rc very well. Now they aren't for steels with high levels of tungsten and or Vanadium carbides but any of your lower alloy steels even if they are ran very hard these stones will do a fine job with. I sharpen zdp189 at 67rc on them all the time and they handle it very well, zdp189 is a high alloy steel with lots of carbides of course but it's chromium carbide mainly and these stones will cut chromium carbide efficiently and effectively. The kuromaku line of stones offers a lot of performance and quality for a very fair price. They are true splash and go stones and that's a huge plus and they aren't messy when sharpening as they don't create any mud, just swarf and they don't load up with steel so that's another huge plus. They come perfectly flat out the box and no lapping needed out the box and that's very nice! I really love these stones and have the full line of them except for the 30k as I don't have a need for it beings I have the 30k shapton glass stone and rarely if ever use the 30k except on straight razors maybe once or twice a year and the 30k stones are very expensive for something that isn't hardly ever used. The 120, 220 and 320 are the cherries of the kuromaku line, they are amazing stones and the extremely fast cutting they are capable of makes them a real gem and 3 that every sharpener should have in their arsenal. Out of the 3 coarse stones if you are only gonna get one I would suggest the 220 as the 320 isn't aggressive enough for heavy reprofiling or larger chip damage repair and the 220 is yet it's not as fast wearing at the 120 is and still cuts steel plenty fast. Personally I only use the 120 for thinning knives and the 220 is for reprofiling and damage correction. The 320 is my start stone to set a fresh bevel and remove fatigued steel on well used and dulled edges and that's what the 320 is perfect for, the 320 is also great if your looking for a fast cutting stone that's a one and done type stone for nice super toothy edges, you can finish on the 320 and have a very aggressive toothy edge if that's what your looking for. The 1k is the best all around stone for most people, it's the perfect one and done stone for home cooks and for general sharpening so long as there is little to no damage to the edge and your not trying to reprofile. The 1k leaves a very sharp edge with high level of keenness and good bite/tooth and is personally the stone I finish most of my cooking knives on as it's the perfect finish for general kitchen knives where you want high keenness but also with good bite. Knives that I use for cutting delicate pieces of fish they will be finished at 8 or 16k but those are knives that are for a specific purpose and require very high levels of keenness with very little bite. Every stone in the kuromaku lineup is very good and each grit has a purpose but for most people the 220, 1000, 5000 will be a pretty well complete set of stones that will cover all their needs. A lot of people will tell you go 320, 1k, 5k but trust me and go 220 instead of the 320 and you will thank me as soon as you have a big chip you need to sharpen out or you are wanting to reprofile a knife that's in a hard and wear resistant steel that's not to say the 320 isn't a great stone because it most definitely is but the 220 will serve most people better just for the fact that it will significantly speed up reprofiling and or damage correction over the 320 and most people aren't going to finish on the 320 anyhow they will go to at least the 1k. These are great quality stones and if you buy them you will be happy and you will have a quality sharpening set that will last you many years and provide you with high performance. The case they come with has great grip on the bottom so when you place the stone in the top of the holder and use it as a sharpening base everything will stay nice and stable for you so a stone vice isn't needed if you don't already have one, the case doubles as a storage case and a sharpening base. Get you some kuromakus and you will be happy!