RAM X-Grip Universal Phone Holder with Ball

You need to purchase additional items to be able to use it. Totally worthless alone.

Acheté pour mettre un Samsung S10e, tout fonctionne parfaitement. La manipulation est facile et rapide. Le téléphone tient bien (j'ai secoué à la main vigoureusement, il tient dans le support) et au pire il est livré avec une araignée en caoutchouc qui assure une sécurité supplémentaire au cas où. Ce n'est pas donné, mais la qualité est là (RAM Mount a fait ses preuves) et à plus de 700€ le téléphone, on peut investir 30 balles... Testé ce matin sur mon trajet habituel, RAS. Portions rapides ou pavés, aucun problème rencontré (et je n'ai pas mis l'élastique).

スマートフォン用とありますが、挟める最大サイズは 6 インチの エイスース SIMフリースマートフォン ZenFone 2 Laser（Qualcomm Snapdragon S616/メモリ 3GB）32GB レッド ZE601KL-RD32S3 ＋シリコンカバーが ギリギリ挟める限界のようです（ ZE601KL 所有 ） スマホの大きさによってはアームの可動範囲が余るようで、触ると余った分だけ回転します ZE601KL はギリギリなのでほとんど回転しないため、自分は便利なのですが 4 ~ 5 インチの中小サイズのスマートフォンだと、走行の振動で左右どちらかに傾く可能性があります 4 本のアームは内部で交差して実際には 2 本のアームからなっており スプリングで閉じているのを開いて挟む構造のため、保持力は挟むモノが大きいほど強くなるので 保持力が弱いと感じる方は RAM テザー (X-グリップホルダーUN7用) を一緒に購入すると良いかも知れません アームの可動域が余って回転する点は、中央の黒部分に NEW ピットクッション 50mm 等をホームセンター等で探して貼ると安定するかも知れません 本製品は部位単位で売られているので、バイクを複数台所有している場合でも バイクに直接付ける部品だけ買い足せば使い回しができ、経済的でもあります 汎用性に優れた良い製品だと思います

Franchement impeccable.

He leído bastante sobre estos soportes y otros en general, dado que se trata de un producto para ir en moto por lo general el margen de error permisible es CERO. Si no sujeta bien el móvil, un iPhone 6 a la basura. Lo instalé en una moto de carretera, los primeros días nervioso, mirando siempre si el móvil seguí allí. Tras más de 3000 Kms con vibraciones, etc. siempre el movil ha estado allí. En un siguiente nivel lo instalé en una moto de enduro, hice ruta con polvo, golpes, caídas. Me extrañó que el móvil estuviera aún en el soporte, pues pensaba que había pasado el límite, pero no falló. Sólo doy unos consejos: El éxito del agarre depende de que la goma del soporte esté como cuando llega nuevo. LIMPIO. A su vez que el móvil esté limpio. Una vez ambos están en contacto y ajustados, el agarre es muy potente. Qué evitar: Cremas hidratántes, acéites, grasas etc. Si el móvil está cubierto con grasa, pierde agarre. Cuidado también con el forro que tengas, puede que disminuya el agarre según el material. Y hay que tener cuidado de no posicionar alguna pata del soporte sobre alguno de los botones.

I originally was looking for something just for my bike. I eventually came across the RAM Mount system. I blew it off at first because of cost and was looking just for a bike solution. But the more I looked at this vs. $10-25 bike-only units, I realized the real power of the modular approach. The cradle locks in my Samsung Galaxy S4 with a UAG case rock solid. I've been on dirt and paved roads on my bike - initially I was nervous but now I don't give it a second thought after a summer of riding. I'm not mountain or BMX biking over jumps or down hill courses, but for the average rider this is more than fine. My wife has had me order one for her bike now too. I got the U-Bolt for my bike with a 1 inch arm. I found this was more than enough to try various different positions until I settled on one. The ball joint system in general gives you a lot more positioning options than others solutions or cradles. I then got a their low profile suction cup for the car, which allows me to just undo one screw on the arm and move the whole cradle and arm to the car. It isn't like a quick snap in/out but unless you are completely lazy, it is not a big hassle. In fact, I'm thinking about getting a second cradle just for the car. But if you are cheap, then this moving it back and forth is easy. Getting the phone in and out of the cradle itself is even easier, partially on the bike. A little more challenging in my car but that is because of my Honda Civic 07's very deep dashboard. I'm getting a longer arm for the car for this very reason and I knew that might be the case even before I ordered. But was confident the modular system would allow me to customize as needed. Very solidly built, I feel I got my money's worth in materials alone. Long term looks promising but have to just wait and see how ist stands up over the years. I'm pretty confident I won't be getting a much larger phone than the S4's 5 inch screen as I feel something like the Note/fablet is too big for my pocket. Which is one thing I liked - this holds my case-less iPod Touch 5 and HTC 8S Windows phone just fine. I feel confident any future phone I might get will work with this. Note my Nexus 7 2013 will NOT fit in this (I'm a web developer so I have lots of gadgets). When I have my phone in the cradle, there is the ability to s*** (turn) the phone about 15 degrees. I have not noticed this being a problem on a bike or car vibration knocking it out of position. I've taken it on 25 mile rides over potholed roads and in 8 hour drives in the car without it moving. Some might consider it even a convenience. How big your phone is will impact this however. It is marked Made in USA, and as far as I can tell they do have manufacturing facilities in the US so it doesn't appear to be just designed in the USA and manufactured in China. I wish they would verify or make this more clear on their site (or Wiki). Overall, very happy with my purchase and I've already ordered more RAM products.