OVERTURE PLA Filament 1.75mm PLA 3D Printer Filament, 1kg Cardboard Spool (2.2lbs), Dimensional Accuracy +/- 0.02mm, Fit Most FDM Printer (Royal Gold)

Gorgeous color, prints well, and only issue I’ve had with this filament is some shaving/softjamming on the extruder that tends to be far more than the other brands/filament I use

One of my favorite Filaments. every one i get works perfectly

The media could not be loaded. I didn't have any issues with clogging or adhesion. It printed well in my Bambu lab 3D printer. I do not think I had a single failed attempt at a print with this filament and I think it looks great! Would buy again definitely and you should too

Couldn't really seem to tune this properly. It always threatened to under-extrude. Typically I print PLA at 215°C because that's the temperature that works the best. 215 was too cool for this, and 220 was too hot. I had minor under-extrusion and stringing simultaneously, which I haven't had with other filaments. The results are decent with some clean-up as long as I didn't have a jam.As for the color, it's really saturated. It doesn't look like real gold because it's too... orange. It's a neat color and really eye-catching, but I can't recommend it if you're printing something you want to look like solid gold. Otherwise, it's a good value; just expect to spend some of it calibrating.

Good quality, color is a little dull for a gold but it works and sticks nicely. Will buy again in a different color no question

In my experience, the OVERTURE PLA Filament 1.75mm was fair, but it required a lot of tweaking to get it to work properly. I encountered significant difficulties getting the filament to adhere to a Prusa textured plate, and even a smooth plate was challenging. I had to smash the filament into my bed with a super-close nozzle distance and slow down the speed to about 10% on the first layer. Additionally, I found that I had to increase my bed temperature to about 70°C and my nozzle temperature to around 220°C to achieve the desired results.While the filament didn't produce any popping bubbles while printing and the final print quality was pretty nice once I got it to stick, I was disappointed with the color. The filament's gold appearance was not as shiny as other silky pla gold filaments, and it looked more like a standard yellow with a little bit of shimmer. After looking at it in daylight id call it "frosted yellow".Overall, the OVERTURE PLA Filament is a budget-friendly option, but I would only recommend it if you are willing to take the time to adjust your printer settings and if you are satisfied with a less shiny gold color. For those who want to achieve a more polished look, it might be worth spending a few extra dollars to upgrade to a higher-quality filament.

Using this was no brainer. Not every filament works perfectly without setting adjustments on my flsun v400 - This just worked perfect out of the gate. Reasonable cost. The gold really prints with smooth glossy surface.

Print quality is exceptional but most of all it is the perfect color gold I need for a wide variety of prints! The Royal Gold stands out really nice and doesn’t have a shiny gold finish which I prefer