Beartooth Comb Raising Kit 2.0 | Adjustable Cheek Rest | Increase Comfort | Reduce Recoil | Made in USA

Was looking for a non invasive riser for my rifle since my cheek weld was slightly off. This was a great solution. Very easy to put on if you follow the directions they provide. The neoprene also gives some face comfort. Definitely worth the buy if your not looking to drill or buy a whole new expensive stock.

It’s hard to get on IF YOU TRY TO SLIDE THE NO SLIP MATERIAL ON FIRST.Wild concept but hear me out, flip it inside out and use the nice neoprene side to slide over the stock from the rear. Get it all the way on and bunched up before flipping it back over onto whatever size pad you’ve got.Very comfortable, easily adjusted, doesn’t mar

Purchased for a tactical shotgun with a reflex sight. The comb of the stock was too low to see the reflex reticle. It was promised to be delivered between the 22nd and 29th of December. It arrived on the 22nd.It took about a half hour to install - it takes some effort to get it on the stock. I did not follow the instructions that called for the Beartooth to be pulled on from the butt end. Instead, I took off the reflex sight and taped over the sharp edges of the rail, then pulled the Beartooth on from the barrel end. I did it because I didn't think the small front of the Beartooth would fit over the butt. I think this was the easiest way to do it. I used two of the foam inserts to get the right eye level. Now when the shotgun is brought up to the shoulder, the reticle is right where it should be.After shooting 30 rounds, I expected some movement. And, there was some. The Beartooth pulled forward a little, maybe about 1/4 inch and the inserts move a little. But, it was not a problem, because the inserts are easy to readjust and the Beartooth can be pulled back into postion easily as well.The only reason I did not give 4 star is that I don't know how long the Beartooth will last over time or how it will do if it gets wet. All in all it is a good product. While it is not a permanent solution, it does what they claim. One other advantage of this "temporary" solution is when I took the reflex sight off and installed the iron sight, all I had to do is push inserts a little to the side and I was able to get in the right position to align the sight.

This product does a great job protecting your stalk and your face plus raises your comb height for a better sight picture and changing your point of impact! And a reasonable price

I really debated on how to rate the Beartooth comb riser. If you are only using one pad or two and follow the directions, installation is fairly easy. On the other hand, if you're trying to get a major rise impact using 3 pads you'll be in for a real battle. I converted a Remington Versamax shotgun that shot left at 40 yds due to manufacturing issues into an extreme turkey gun by installing an Sig tactical green dot meaning I needed about a 1 1/2' rise for proper cheek contact. Now as a power lifter with 7 state records, I'm not exactly a wimp, but it took me over an hour of extreme pulling to cover all three pads. I ended up removing some skin from my fingers but eventually got this thing fitted. I admit the result is excellent and now I have pin point accuracy with this shotgun and I am really excited to use it this fall. That said, Beartooth needs a better way to slide the neoprene back over the riser pads as the rubber backing of the sleeve making contact with the pads will not allow easy movement. I recommend a thin slippery nylon insert cut to the dimensions of the pads to allow the sleeve to slide easier. I'll give Beartooth credit for one thing for sure, this sleeve is really tough and well stitched. I literally used some significant pulling force to get this thing on and the neoprene and seams all held up. All this to say that with an improved method for installation over multiple pads, this sleeve would be a 5 star tool. It really has solved my issue for a high rise on the shotgun comb and now I have a true turkey killer shotgun.

This item is harder than hell to put on the stock of your gun. I spent about 2 1/2 hours trying when I finally gave up. They are still sitting on top of me gun safe.

I dont understand all the reviews stating its a difficult install. Yeah...its a tight fit....but isnt it suppose to be? I didnt have the scope installed at the time of install, but was able to put on with relative ease from either end of the rifle(Weatherby Vanguard). Sure....it took a bit of manipulating to get it all squared up, but it was literally only minutes. The more time consuming part was figuring out which combo of inserts to use to obtain proper eye alignment(after the scope was installed). I used some tape to hold the different combos of inserts to the stock before installing the sleeve. Once i found the right combo I used a small amount of shoe goo to hold final combo of inserts together. It wasnt absolutely necessary but I also shaped my stacked combo of inserts, with a razor blade and sander to better conform to my Monte Carlo stock. Once it was the way I wanted it I used a couple small dabs of shoe goo to hold inserts to the stock to better hold them in place while installing sleeve and to keep from shifting during normal handling/use(I suppose I could have used double sided tape for that as well). I dont know if they would have shifted under normal handling/use, but I didnt want to find out that it would at the wrong time either...lol. "Disclaimer".... I have a synthetic stock and pre-tested the shoe goo to make sure it would not damage it(I suggest you do the same)...and that I could remove any residue. I also only used small dabs sparingly on the insert to stock connection in case I ever wanted to remove in order to clean, dry, change out or eliminate. Hope this helps

Nähte sind gut verarbeitet, das Material ist sehr elastisch und bleibt wo es sein soll. Die Montage habe ich mir schwieriger vorgestellt als sie war. Der Höhenausgleich für die Wangenauflage ist gut einstellbar mit den mitgelieferten Pads.

Article de qualité, les différentes tailles de mousse permettent une bonne adaptation à sa morphologie, bonne densité, évite également le contact avec la crosse froide en hiver, plutôt agréable

Materiali, cuciture e modulabilità al top! L'accessorio perfetto per adeguare la mira e guadagnare confort.

Perfect

Bin sehr zufrieden. Gute Qualität, einfache Handhabung. Passt sogar auf meinen Lochschaft ohne zu stören.