E0032

I'm using it over the air intake of my main PC, to monitor room temperature. It's a nice little add-on so that I know that I'm not really freezing in the winter, it just feels that way. Getting the clip off so as to read in degF was a pain, though. Not much room to reach in, and that little sucker was in there TIGHT! Edit: Bought two more, so I will have one for intake air temperature, one for room temperature, and one for outside air. In the photo, all three probes are taped together. I haven't compared them to a calibrated thermometer, but they all read very close to each other, so it's good so far.

I bought the KETOTEK Digital Thermometer Temperature Gauge to monitor the inside temperature of a tower gaming computer after I installed aquarium filter material at all the tower vent locations. Filter link: (https://www.amazon.com/dp/B01KYS02EG?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) The filters are to prevent dog hair and dust from building-up on the cooling fan blades and other interior components. After covering all the openings of the tower with the filter material, I wanted to monitor the inside temperature of the computer tower since the computer remains on 95% of the time. The filters work great with little to no dust build-up, and the interior tower temperature remains constant, reading between 63 and 71 degrees. The temperature gauge is plugged into a USB port and runs 24/7. Using a piece of rigid foam, the temperature probe is anchored upright in the middle interior space of the tower. Some temperature gauges go dark after a short period of time and require being touched to illuminate the face to read the gauge. The face of the KETOTEK Digital Thermometer is easy to read and remains illuminated 24/7, even when the computer is turned off. I have the gauge set to read Fahrenheit, but the gauge arrives set to read Celsius. At the back of the gauge, there is a small pin that, once removed with tweezers, switches from reading Celsius to reading Fahrenheit.

This KEOTEK Digital thermometer was soft and on the eyes to look at day and night.. An excellent item for use on a car dashboard to monitor engine temperature. If the sensor lead is too short, ordinary speaker wire can be used to lengthen it. The sensor lead is just regular, very thin, about 22 gauge wire. I would suggest cutting the sensor lead a few inches outside of the sensor housing to lengthen the lead. The sensor is soldered on two tiny tabs on the PC board and the new lead can be soldered ther in place of the original. I did that but If a person is not skilled enough to do that then just add on to the existing wire externally. Saves time prying open the device housing and tearing two small wires from the backlite main LED. Accuracy is excellent. If a person needs beater accuracy then he'll have to pay more for a lab grade temp measuring devices. All in all the KEOTEK A great little device and sold and a lot of value for an excellent temp gauge sold at low price .

I put this on my pwm controller for my trolling motor to monitor the temperature of the board. I checked it with other temp probes and it's very accurate. Very nice and crisp display. I have two issues with it, that are small. Not water resistant and the screen is small and I struggle to see the numbers from 4 feet away. Other than that, useful and accurate

Very cool! but only if it cool inside the car. I use it in the car to check the temp during deliveries. Why did you pick this product vs others?: USB connectivity and sensor type. Functionality: It is function specific. User has to provide power (5vdc usb) to use it.

Very fast and accurate for increasing temperature and monitoring variation. It is much slower in settling back to a lower temperature when ramped up by touch and holding the thermocouple sensor with my fingers. The display is bright and easy to read. I am using it for my aquarium tank to check the water temp to the readout from the heater. Someone else posted that the thermocouple interface was rusting but I put Aqueon silicone sealant to prevent that and I think that should fix that issue. I plan to but more for my other tanks.

I wanted to be able to see the temperature in the output side of our HVAC air handler. I connected this to an AC 24v->DC 12v converter and then powered the converter from the 24v "fan" line of the HVAC blower. Since the device uses less than half a watt, it doesn't create any additional load issues for the HVAC transformer when it's running. This turns on the temperature display only when the HVAC is running in either heat or cool mode , and the sensor appears to accurately pick up the air temperature in the output side plenum. I simply poked a small hole in the side of the foam-board plenum above the air handler and inserted the probe, then caulked the opening. When I compared this sensor to another temperature gauge, it was within 1 degree F, so I consider it to be working properly. I've actually ordered a second one to insert in the supply side plenum so I can easily measure the temperature delta for the system at any time, whether it's in heat mode or cool mode.

Great thermometer. Nice digital display. Great addition to my aquarium. Good quality and accuracy of temperature.

Nice lcd of temp for my pc compture how hot cpu ... thank u

ES BUENPRODUCTO Y SE PUEDE MPOTRAR EN CUALQUIER MUEBLE, LO UNICO ES EL TAMAÑO DE LOS CABLES, DEBERIAN SER UN POCO MAS LARGOS PARA MEJORAR SU INSTALACION, OTRO PUNTO ES LA CALIBRACION, A MI PARECER NO ESTA CALIBRADO CORRECTAMENTE, LO COMPAE CON TEMOMETRO INFRAROJO Y ME DAN CASI 2 GRADOS DE DIFERENCIA, EL IFRAROJO MARCA 28 GRADOS MIENTRAS QUE ESTE DIGITAL ME MMARCA 29.8 GRADOS

perfect

Tiny and cheap material. On top of that, it is very inaccurate.

Scarsa qualità