Sterling ESN1145 TS007 BS1 1 Star Police Approved Secured by Design Euro Door Cylinder, Satin Nickle, 11 x 45mm (56mm)

On searching for a suitable euro cylinder to fit our garage door after investigating the geometry of the current one.. I couldn't find a cylinder who's cam position matched that of our current one at rest (key out 'rest/zero' position.. cam stuck out of the side of the cylinder). I watched a few videos on the inner workings of a eurolock and how to dismantle them, thinking I'd have to alter the cam angle of any new cylinder I bought (all listed items of the 40mm had the cam 'inline' with the body of the cylinder at rest/zero key position). I chose this lock simply because it was cheap and had all the 'anti everything' features... this was whilst thinking 'I could possibly end up in a pile of springs and tumblers' while attempting to dismantle a new cylinder for the cam angle change. Cheap.. meant I wouldn't be crying if I did mess it up lol. However, on arrival, with my subsequent close investigation and strong cup of coffee (to have my wits about me for the hideous, sensitive, dismantling task ahead).. I discovered a beautiful little feature on the opposite end of the barrel to the key socket. A small spring loaded button centred in that end of the barrel. On depressing this small button in a few mm's, the cam unlocked from its position.. allowing me to rotate it freely in 90° degree steps. When the cam reached one of the 4 set positions on the barrel, the small button clicked back out, firmly loacking the cam into that new angle. The sigh of relief that emitted from me that day could be heard in the beta-reticuli system. A lone tear of joy welled in my eye and rolled down my cheek. I looked up into the sky and thanked the almighty Jeff Bezos for this wonderful small fragment of innovation.It's a good lock... especially for the money. It has a mixture of smooth and flanged tumblers preventing picking and bumping. It has a pair of hardened steel pins driven in up front.. just behind the key face of the cylinder that will snap the tips off a drill bit. There is a heavy groove cut into both sides of the cylinder, creating a fault line where the lock will snap. This leaves 2 flanged tumblers left, engaged into the remainder of the barrel. This will cause great annoyance to someone attempting to pick the remainder of the lock due to the depth into the door they'd have to work at. The standard lock picking tools won't work at that depth and angle. All in all.. well made cheap and clever. I stand impressed xx

After my previous lock ceased to work, I managed to extract the old barrel from the locking mechanism and this one took all of 60 seconds to insert.It’s the 41mm barrel.Delighted with the purchase at a great price and it came with 3 keys!

The lock fitted my garage door perfectly and was extremely easy to fit it is excellent quality

The best way to rate a lock is to try picking it in less than five minutes. That's about all the time a thief will rIsk spending on it if it doesn't yield. I failed to open this cylinder within that time. For the money charged that makes this a pretty good value lock.

My partner lost the keys to the garage - the engineer (phone call) said the entire opening/locking mechanism would need replacing, cost incl labour £100. I ordered the single barrel lock, undid one screw to take out the old barrel, popped in the new one and fastened in with the new screw. For less than £10! And it comes with 3 keys.

Easy to change .

Straightforward to fit .

Given this single sided lock is likely to be used for sliding doors the fixing screw is far too long, luckily I saved the screw from the old lock.Great that it came with three keys.Very easy to fit.

Passt

Utilizzato per la serratura di una porta tagliafuoco, questo cilindro si è rivelato essere di ottima fattura e piu' sicuro dei comuni cilindri, includendo un livello di 'cifratura' in piu' (la chiave e' infatti un po' piu' lunga delle chiavi standard). Il prezzo potrebbe sembrare un po' alto ma e' congruo rispetto alla qualita' del prodotto. Adatto, ove compatibile in base allo spessore porta e al tipo di serratura, per porte tagliafuoco con maniglione antipanico. Personalmente lo consiglio.

Conforme à la description et parfait pour mes besoins