🚗 Inflate like a pro, wherever the road takes you!
The Viair 10005 Heavy Duty Onboard Air System is a compact, vehicle-mounted compressor delivering up to 150 PSI with a 33% duty cycle. Designed for inflating tires up to 35 inches and powering small pneumatic tools, it includes a sealed remote mount air filter and all necessary installation parts for quick, reliable onboard inflation.
Manufacturer | Viair Corporation |
Brand | VIAIR |
Model | Heavy Duty On Board Air System |
Item Weight | 0.16 ounces |
Product Dimensions | 26.5 x 14.5 x 10 inches |
Item model number | 10005 |
Is Discontinued By Manufacturer | Yes |
Exterior | Painted |
Manufacturer Part Number | 10005 |
OEM Part Number | 10005 |
Special Features | Quick Inflation |
Voltage | 12 Volts (DC) |
L**.
Awesome DIY kit, needs a few more components to be perfect
I installed this on my 2007 FJ cruiser as in the pictures. I think the full installation took me about 6.5 hours with making all custom brackets. This would have been much more difficult without access to a good shop. It works great. I would highly recommend this to someone with good DIY experience and a access to a decent shop/tools. I made a few modifications in the process to get it just how I wanted it:1. bought an extra quick connect set so I could have one on both ends of the hose2. removed gauge and switch from their mounting plate and cut them holes in the trim instead(pictured)3. had to get extra wire to hook up the switch in the cab while the compressor is in the back4. made all the mounting brackets for the tank and compressor so they fit up under the truck inside the frame.5. I used my own wire connectors and put heat shrink on most of the connections.6. I also bought a attachment to fill tires that has a digital gauge on it.7. put the air port on the side of the rear bumper and am going to make a cap to keep dust/debris outI'm still not sure about mounting the compressor under the truck like I have it, but the hose off the compressor is pretty short, and they did supply a breather that is run into the cab so it wont suck in any water.
J**R
Solid unit, complex install
This is a mostly complete kit for some installs, but your own particular install may require a trip to the hardware store. That’s not a negative against VIAIR, but don’t expect to just install this without a plan. That said, I have installed this in my truck bed between two support frames for a full size mattress. After exhaustively weighing options, this was my best location. I may add a photo later if anyone cares to see.I installed this on my 2019 F-150 XLT extended cab 4x4, 6.5’ bed. I run 33’s. It runs quieter than expected, fills the tank to preset pressures quickly, and appears to be a very well made kit. I’ll report back after some usage.
C**2
Great onboard air supply
This is the 2nd Viair tank and pump I purchased. The 1st is still running in my 2008 Silverado HD3500. I also put an air horn on the truck for the times when you are towing and need more than the stock horn! When I was pulling a 5th wheel RV I wanted to be sure I had air and it did pay off a few times. Also have a 20 ton air jack for the axle and it works great. I now have a 26' Class C and just mounted this unit under the frame and now have it ready for the jack, and air as needed. Great product and the package has all the pressure switch and dash power switch and guage. Highly recommend.
A**R
Always a good buy
Wanted an onboard air system for my new pickup, went with VIAIR again. Arrived fast. Solid parts and everything included. I use it to air up tires and run my suspension air bags.
P**Y
Well built
This is the second time I have used this product. VIAIR is well build and instructions are well written. Compressor is a little noisy even with the muffler installed.
M**S
works great
I am currently using this for Hadley ambassador air horns, my Hadley factory compressor went out so I upgraded for a better compressor and I joined the tanks together for 3 gallons of reservoir.Fills three gallons 150 psi in approx 3 min 48 seconds from empty. just be aware where you mount the compressor the handle / head / and metal coated air line will get extremely hot. They provide a large amount of air line and fittings I found the wire amount from my drivers side battery to under rear seat in F 250 was not enough for switch and separate battery feed. 4 years plus so far works great more impressed by the day with compressor switch is a little weak just melted on but 8 bucks simple I'll consider it a wearable item get a lot of use ...
S**N
Ok, not great
Decent little setup. Pretty easy to install, and I hooked mine up to a plug to run from my 5th wheel plug in the bed when I need it. Compressor is great! Super handy. The “air system” package was a waste of money since my pressure cut off doesn’t work. I even hooked it up to a pneumatic tester and watched the voltages. Definitely broken, and shipped to me that way. Everything else works fine, but I can’t just flip it on and ignore it. For what I intend to use it for that shouldn’t be a huge deal, just irritating since it was a water of money. Should’ve just got the compressor itself.
J**M
very nice
great unit for any work truck never know went you will need some air
Trustpilot
1 day ago
1 week ago