Crucial 16GB, 260-pin SODIMM, DDR4 PC4-19200,

works as it should! Great values! Increased my speed. The fit was perfect .

Works as described, good brand, I recommend it 100%.

I've always been a Crucial fan, at least for RAM, and here is another great value for your buck. My laptop is the new Lenovo Flex 15 (2019 version), and it only came with 8gb of RAM (4gb soldered), and Lenovo's 16gb upgrade kit cost well over $100 for the same speed and quality RAM as this card (2400, 1x16gb, Dual). So obviously as long as it keeps working, this is a steal of a deal. I was gonna get the Ballistix version but according to their hardware scanner, it's not compatible. However, I can't find any drawbacks or downgrades with this more vanilla RAM- and so far, performance wise, I can't find any issues either. So always make sure to check with that program before purchasing anything. The install was relatively easy, though that's entirely dependent on the Laptop manufacturer, not the memory supplier. The upgrade itself was immediate; went from all my programs lagging out whenever I loaded up a game or program that used any more than 2gb's. With the 20gb that is now in this laptop, I can run whatever I want and seemingly have no lag or delays. Absolutely thrilling. This review was written on the first day of use, so I will update it if anything changes. If no edits are made, just assume it's still working great :)

Quick arrival and easy install. The crutial website was a great aid for the install process as a first time laptop upgrade trial. I have no prior tech experience so wasn’t sure what to expect but this made my old 2015 laptop run so much faster! And the site was super helpful in known the max expandability of my RAM. Went from 8gb to 32gb.

I bought two of these to keep an old computer going. Though they're unmatched, everything's working great.

Cooked up my laptop from 8GB - 24GB total. Superfast!!

when i first installed this ram i also changed the thermal paste and i used alcohol to clean it off then when i put it back together it would not boot my power led on the side was on but pressing the power button did nothing so i opened it back up and i cleaned off the thermal paste (i used a big blob like the stock paste was even around the cpu dye) then i inserted the 4gb ram stick it came stock with, put screws in then i tried to turn it on and no luck either but when i held the power button the led would turn off then back on so i thought 1. it could have been the alcohol did something to the cpu or there was too much paste 2. it could be the thermal pads i cut down and placed on every chip on the motherboard including wifi card m.2 ssd battery cpu heatsink pipe and hdd to cover the exposed part or 3. i could have wet something i wasnt supposed to when i was wiping it down with a solution i sprayed on a microfiber cloth and it needs to dry, i even unplugged the battery and re plugged it nothing, so i opened it and switched everything to stock , stock ssd removed hdd stock ram removed thermal pads and placed a small amount of thermal paste, 1 hour went by no luck then at 1 and a half hours when i pressed the power button the fans would come on full power and i tried connecting an external display via hdmi but nothing happened black screen, then 2 hours went by and finally it powered on but the trackpad wasnt working so i restarted it and waited a little and everything started working normall eventually. i was freaking out getting it ready to take it back from where i bought it, thats what i get for messing with it too much. i like this ram you can really notice a difference 20gb total installed 18.0gb useable. 2400mhz and the timings even went down to cas latency 17 according to cpu-z, coretemp, hardware info and system information. asus vivobook 14 ryzen 3 3250u f412da with elan fingerprint sensor. 20gb ram dual channel 1tb m.2 nvme 500gb hdd 5400rpm windows 10

My HP S01-2023W desktop showed a max capacity of 8 GB memory. Crucial's website said the slim series desktops MAY be able to take 16GB so I gave it a whirl. I snapped the memory in place, started the computer & the 16Gb memory was recognized and is working flawlessly. This is such a simple upgrade & it takes absolutely NO skill to do. I also tossed an additional hard drive into the computer with another operating system while I was at it and that works properly with this memory, too. I'm a Mac geek so this Windows computer is only used for embroidery digitizing & sign software but the upgrade stopped the endless spinning "thinking" wheel I was constantly getting. ⭐️⭐️⭐️⭐️⭐️ Would recommend!