3D PLA 1.75MM Yellow Plastic 3D Printer Printing Filament, Dimensional Accuracy +/- 0.04 mm, 1KG 2.2LBS

Description

Settings and Cautions:Getting the First Layer Right:The first layer is the most important part of any print. There are a few things you need to do to get the first layer to stick well.• You need the print bed (or print surface) to be level.• You need the extruder to be homed to the correct height from the bed.• You need a good base material for your PLA to adhere to.• Print Settings: Print PLA at 200°C for the first 1 to 3 layers, then drop the temperature down to 190 – 195°C for the rest of the print. Heated printer bed 60 – 80°C, Fan: ON, Infill: 50 – 80%, Print Speed: 50 – 60mm/sec for PLA.Getting the Temperature Right:When working with a new roll of filament for the first time, we generally like to start out printing at about 205C and then adjusting the temperature up or down by 5 degree increments until we get the quality of the print, and the strength of the part, to be in good balance with each other.Why Choose Us:1. Made from 100% Grade A Virgin Raw Materials from Natureworks USA.2. Controlled using Non-Contact Laser Diameter Gauge: Rapid, precise and repeatable measurements to minimal dimensional tolerances.3. New Non-Brittle Formula: Naturally brittle plastics such as PLA can now be used with confidence knowing that the filament will not brake during a print job, while still inside the printer or just sitting in storage.4. Ideal for High Resolution Prints: Our filaments will give you outstanding results even when printing at ultra-high resolution using the latest 3D printers.5. Tested on a Wide Range of 3D Printers: We repeatedly and accurately test our filaments in-house, but more importantly, we act based on feedback from thousands of customers all across North America.