115526

Another flawless product from Monoprice. Worth every penny. No issues with installation and setup, only took a few minutes before my monitor was on its new stand. Tilt, rotation, height adjustment, all function seamlessly. On top of that, you can easily dismount your monitor as the backing plate you screw on can easily be slipped on or off by just pulling a tab back and lifting the monitor up, in case this is a feature you desire. The desk clamp also has 2 holes where you can store the included allen wrenches in case you ever need to tighten or loosen the joints on this stand to accommodate the weight of your monitor.Could not ask for a better experience, what an amazing product. Keep up the good work.

I was not expecting much from this monitor arm, but I was pleasantly surprised. It very solidly built, movement is smooth and easy, and it clamps very solid.The clamp also has two separate ways to be mounted and has a lot of clamping range. The cable management in the arm is very nice as well and works great.I highly recommend these monitor arms. I bought this for a friend so we could try it out. I have the dual monitor arms from Secret Lab and if I could return them I’d just buy two of these. I’m very impressed.

I read a lot of the reviews and was really worried about the ability for the monitor arm and pitch to stay put -- it worked fine. I have a antique editor's desk on the smaller side with one of those standing desk liftable surface things on top. I connected this to the standing desk surface and it is fully supported. I also have a really really small area to work with in my "office"/closet area and I was able to maneuver it into wasted corner space to the right off my desk. I work with a lot of paper files so it was such a relief to have that desk space back!Also, I was able to do everything with the hex keys provided, a pair of pliers for tightening those up, and a drill for a few screws (bc so much faster and easier on the wrists). I cannot emphasize how out of shape and not strong I am from not working out all COVID -- I regularly ask my husband to open jars and things. Yet, I was able to tighten everything up pretty easily. Also the actual mounting of the monitor to the arm is much easier than anticipated. You just screw in their VESA backing to the monitor which you would have laid down flat, then it can be lifted and slid/locked into place. Not hard at all.I attached a 27 in monitor to it as well. I remember i my monitor is not the max weight allowed by the arm, but it was in the higher weight range.

Received this today. I'm using if for my Acer X34, even though the display is outside the advertised size. I had read that someone else had success with the same monitor so wanted to try. And I didn't want to pay a ton of money for it. At $57 this was less than half the price of some other arms.So far (it's only been a few hours) it is doing just what I need it to do - free up some desk space. I don't anticipate moving the monitor much, but this mount would allow me to do that if I wanted to (I like having options, even if I don't see a need for them immediately). Replaced the standard desk mount that came with the monitor and got at least an additional 6" of depth on my desk.Package arrived quickly. It was well packed. Went together easily (I'm using clamp mode, not drilled mode). Three minor issues -1) I had a hard time fitting the monitor onto the mount due to the monitor's design (the plastic housing on the back of the monitor sticks out quite a bit beyond the vesa mount). Had to attach vesa plate to arm, then screw vesa plate to monitor because I couldn't do it the right way (attach plate to monitor, then put monitor + plate onto arm). Really not an issue with the monitor - the fault belongs with Acer's monitor design.2) Attaching vesa plate to monitor was easy. When I had to do the other way around (see 1) above) I had a hard time getting the four screws to catch in the monitor. I think the monitor is slightly curved in the back, while the plate is not. Not really a problem with the arm, but it was a tiny bit difficult (especially while trying to hold up a 16 pound monitor while screwing the plate in).3) I had to REALLY crank down on the gas shock to get the monitor to sit correctly. I'm glad the socket is really deep and the included wrech sits in it well, because I was concerned that I might break the monitor if the wrench slipped at all. The arm is holding the monitor properly, but it too some elbow greast to crank it up properly. This I suspect is due to the monitor's weight, not any fault with the arm. As I said, it is working fine now.Items 1) and 2) above are not really a problem with the arm, more a problem with the monitor. But thought I'd mention them. Item 3) above is also not really a problem, but just be ready to really crank down on the mount adjustments if you have a heavy monitor.

I came across this product after reading the Wirecutter article about monitor arms. I was looking for something sturdy, flexible, and affordable that would fit well within my small workspace. I also didn’t want to buy another arm in the near future or be frustrated by wobbly movements.For my use, this product is great! It fits well within my space and looks as robust as the Fully arm! The movement is smooth and gives me the feeling that it is secure and sturdy. Cable management also worked out great. I had a lot of cables (5) coming out of my monitor that needed to be routed through this thing. It was a little bit of a challenge but it worked out great.Would highly recommend to someone looking for an aesthetic product, that does the job it was made for without being expensive. It isn’t the cheapest option but I think it is the best value option. If you want something even better, I would recommend searching on eBay for professional equipment that is being liquidated.

Compared to the cheaper $25-30 Monoprice arms that have no height spring you're really only getting one degree of freedom of easy adjustment (height). The tilt and rotation adjustments are still very poor. They require a lot of fidgeting and may not hold if you nudge the monitor. I bought one of these to replace one of those cheaper arms and am a bit disappointed. You will not be gently grabbing your monitor and adjusting it with this. You'll need to stand up, grab it with both hands and muscle it around to get it where you want.Not a big fan of the cable management tray. It's only on the upper part of the arm and I had a hard time getting a second cable through it. Two or three smaller clips would've worker better. The channel isn't very large.Also note the arm only rotates at the base 270 degrees, I don't understand why, but there's some sort of pin stopping full 360 degree rotation where the arm connects to the base. This makes initial setup a bit painful, and you may find yourself having to swing the arm all the way around to get the monitor where you need it.Seems to hold the weight of my older heavy Dell UW2410 just fine so should be fine for more modern, lighter 34" computer monitors.

This is the best monitor arm I have owned so far and I have bought ones from vivo and huanuo(?) and none could handle the weight of my monitor even though they said it could and the height was not satisfactory. This arm ticked all the boxes I was looking for. It’s very sturdy, change height smoothly (and it goes pretty high up), has a nice cable management slot on both halves of the arm, and looks sleek. Seal of approval from me.

This arm is an outstanding affordable solution for lighter-weight displays.The trick is to use the Allen wrenches (supplied) to get the gas-assisted supports to hold up the weight of the display.It took me a surprisingly large amount of turns to hold without falling. It works perfectly now.A superb value! I’ve always loved Monoprice for their affordable high-quality cables, but I think this VESA mount will be my first choice moving forward because of the excellent features and performance.Thanks Monoprice. Well done!

Llevo más de un año con el producto y cero fallas, el soporte es muy resistente y muy fácil de instalar, lo usé con un monitor Huawei Mateview GT Ultrawide de 34 pulgadas, que otros brazos no habían podido sostener y este si, sin problemas. Solo hay que ajustar bien los seguros y tornillos y funciona perfecto.

Der Arm ist top bis jetzt keine schlechte Erfahrung damit gemacht. Ich habe 1 Arm bestellt und es kommen BIS JETZT 2 an, als ich versuchte den 2 Arm zu stornieren oder den Verkäufer anzuschreiben bekam ich keine Antwort. Habe mich daraufhin mit den Support in Verbindung gesetzt um so eine Antwort zu erhalten. Falsch gedacht laut den Support habe ich ein arm bestellt und einer kam an, von einen 2 wüsten sie nichts.

Really well made product that is working really well so far after 2-3 days of use. The setup was pretty easy but requires a little bit work to get the arm tightened and the monitor onto the arm.

Great monitor arm, holds my 34 inch monitor just fine. Would recommend purchasing

Me esperaba un producto de peor calidad ya que los demás que son a gas valen mas de 100 euros, tengo puesto en el un acer predator xbhu de 27 y aguanta perfectamente. Si cuando lo montéis veis que no aguanta es porque tenéis que aflojar el tornillo del gas para darle apertura hasta que poco a poco va subiendo el soporte.Mis dieces.