Polymaker PLA PRO Filament 1.75mm 1kg, Tough & High Rigidity Grey 3D Printing Filament, PolyLite PLA PRO 3D Printer Filament 1.75mm, Print with Most 3D Printers

Very nice PLA. This is my first time printing with this PLA. I am very pleases with the performance of this PLA. Shipping was fast and it was packaged well. The spool was tightly wound with not tangles and worked smoothly on my Prusa MK4S machine. I used standard PLA settings and the prints came out perfect. Was very happy with the quality of the prints. I really like the dark Gray color as it match my bike perfectly. Will purchase again.

So to start off, this 3D general FDE polylite PLA pro is pretty amazing and I’m about to buy my 3rd&4th rolls. Dimensional accuracy is slightly better than .05mm where I checked but I didn’t take pictures of my gauge and only checked twice during 1 long (34hr) print about halfway through the roll. It’s got great properties all around, including both impact resistance and rigidity. It’s flexible but still very stiff. I haven’t tested the heat resistance, although it’s not something I’m terribly worried about. It’s super easy to print with and it prints really well with great layer adhesion, some slight warping on steep overhangs and really thin areas if you don’t use fans. I used 30-50% fans and printed relatively slow for anything too crazy and was virtually warp-free. I probably could’ve printed faster tbh but I prefer quality over speed. (The brace and hand stop were printed on an sv06 using the default prusaslicer speed settings with default dynamic overhang speeds and fan at 40% bridges at 100% and they printed perfectly. The only time I had any stringing at all was about a week into using the roll without drying it. I dried it for 6hrs at 55°c in a sunlu dryer box and it was good to go again. So I do recommend keeping it dry or drying it periodically, as it shows more hydrophilic tendencies or symptoms than other PLA plus filaments I’ve used. It has an incredibly awesome matte/flat finish that’s really hard to get with most other PLA plus filaments (that’s probably my favorite feature of this filament tbh), and the color is really great although it’s more of a desert tan than FDE in my opinion. I guess desert tan could be considered a shade of fde these days with how many different shades there are lol but it’s fairly light. All in all it’s absolutely awesome and I’ve almost completely switched over from eSun (except for a couple amazing colors that eSun does best like the olive green *chef’s kiss* and their grey is awesome too). Still giving 5 stars even tho I wish the color was more of a true FDE. Can’t beat the printability or material properties. And that matte finish tho 🤌👌

I've been using Hatchbox PLA, eSUN PLA+, and ELEGOO Plus for the last few years, but I saw a few posts on reddit saying how much better Polymaker PLA Pro is and decided to give it a try. I'm happy to say that the hype was well-deserved. It's by far the best filament I've ever tried. I primarily print small D&D minis with my Ender 5 and when I compare a mini made from Polymaker PLA Pro vs any of the other brands I listed above, the Polymaker PLA Pro minis are stronger with less stringing and a little more detail than any of the other options. The layer adhesion is notably better with a much smoother and clean finish. Because the layer adhesion is so strong thin parts that usually bend or break during printing come out clean and strong. For me, that means I can print minis with thin legs or small tools and they not only come out looking great but have enough strength to be handled. Many of my minis have scales or chainmail and other tiny details that used to be washed out, but now all the small details are there. Some minis have spears or sharp spikes and those used to come out slightly rounded and blunt, using the playmaker they come out so sharp I have to dull them a bit. Usually, I print minis at 130% size so all the details come out, but with this filament, I can print them at their standard size. This saves me a ton of time and filament and the minis are still stronger and less brittle than the other brands I've tried. If I'd known how much better my minis would be I would have been buying this stuff from the start. It's slightly more expensive, but it quickly pays for itself when you have no failures and your prints are strong enough that they don't need to be reprinted. I'm not sponsored or anything, it really is that much better and has really upped the quality of my minis. 10/10

A nice rich dark grey color, I've printed multiple colors from the PLA Pro selection, but I do think this color might need a slight change of settings, probably 225c. I usually do 220c, 60 bed with default settings on a x1c and noticed this one acts a bit different especially on rounded pieces with a slight overhang, the seam gets ugly, like blobs forming only around the seam. So I'll need to figure out the settings. Besides that, if I use any other color, such as the Army Green, it prints flawless with the settings I used for the dark grey. I'll still use it and plan to order more, just need to figure out the right settings

Mat yapısı ve kalitesi çok başarılı, sağlamlık anlamında da çok başarılı olduğunu söylemekte fayda var.

Prints without stringing

I love this filament so far! I've yet to really put its strength to the test compared to regular PLA, but it behaves well. Well wound, though this may depend on the spool you get The cardboard spool arrived slightly bent in one spot, but this wasn't a problem at all, and was easily pushed back.

La qualité Polymaker, jamais déçu! Le packaging est soigné, le bobinage est contrôlé. Au top dés la première impression sur mon Ender3 V2. Bed 60° et Buse 215°. PLA Pro parfait pour les pièces techniques. 10/10++

ミリタリー用品の製作に購入しました。 一般的なDEより薄めでした。 値段が高いのが難点。