VVIVID XPO Black Carbon Fiber Car Wrap Vinyl Roll with Air Release Technology (4ft x 5ft)

Used on sun-faded window trim pieces, grill, and license plate trim. Install was easy and just have to see how it lasts in my hot Az summer. Looks really good though, like real carbon fiber. I will buy again if it handles the heat here.

This brand uses a heat activated adhesive, which makes it very easy to work with. Until it's heated up with a hair dryer or heat gun, it is easy to reposition and unstick it from itself. This brand is the 3rd time I've tried CF wrap, and came out the best by far. Will use again as it really built up my confidence too!

this is probably our 10th time using vivid vinyl wraps. although we are not professional installers we have done it enough that we know what we are doingthis was the worst vivid product we used. it had good adhesion and was easy to work with however the first 5ft.by 5ft. section we took off roll was damaged to the point that it was useless for the hood. it had gouges and rips in it from about 1 inch to 3 or 4 inches. so that was no good. the 2nd piece we went to use was better but far from perfect. on our 3rd piece it was in much better so we proceeded with the install. like I said before it had good adhesion and easy to reposition. the problem was even though nobody handle the front of the wrap (we had a guy on each side holding and a 3rd guy working the product) when we were done there were 3 rips in it. I am very disappointed in vvivid. they used to have a great product but not anymore. I don't know if they are having their stuff made by someone else but it's not the same. their quality control is gone. and so are we as customers.

Worked good for interior and exterior for me only used on emblems and small places

TL:DR - Suited for temporary use, not wrapable around corners and low-tack.As someone who has been in the industry working with all types of SAV (self adhesive vinyl) I can 100% say that this stuff is very cheap, it is not 3.9mil and it is low-tack. The product isn't completely awful, but it is by no means suited for outdoor use, e.g. car wrapping. This product is suited for temporary applications and can not handle compound corners or wrapping. If you want a car wrap that can handle wrapping, then you need 3M 180c vinyl. I have tested this product on my car vents and will see how it holds up.Note on the low-tack: The adhesive glue came off as I test heated it and the vinyl got instantly soft and tore, which should never happen with car wrap vinyls. This is improper backer. This is also removable, ergo the adhesion won't fully cure so it's basically a low-tack sticker. A car wrap product should be repositionable (meaning removable and repositionable on initial install).

This was my first time attempting something like this. My only advice would be to use a really sharp knife to trim the excess, or it will not form a nice enough edge. Also, if you have a heat gun that really helps but don't over do it or the vinyl will melt. I really like the look and texture of this material. I would easily recommend it to anyone.

This is a very high quality wrap that is very simple to work with. It is sticky but can easily be pulled off and repositioned if necessary. It is easy to cut and can be traced with your nail before cutting to see the lines better. I like the look of it and it even has some texture to it. It looks about as close to the real thing as you are going to get. Keep in mind this is not the glossy carbon fiber but I have found that interior gloss wipes make this stuff shine very well. I’ll definitely come back to Vvivid when I take on my next wrap project.

The wrap is a 3m very nice product .. easy to work with with alittle heat .. prep the surface correctly before installing and won’t have any issues

So first time wrapping and its not as easy as its made out online. I did manage to get it done but I wasn't all impressed with the adhesive like alot of the time I had to use the heat gun the get the wrap to adhere around a corner or something but some buts were still a little flappy. For the price I cannot really complain and after a long play around with the stuff I did manage to make it work. I'd recommend the product just be aware its not a walk in the park.

Probably one of the worst vinyls I have used. Tears easily around edges and difficult to remove tiny bubbles. Not suitable for complex round edging work.

The media could not be loaded.  No es la primera vez que lo compro muy recomendable aún para amateurs como yo

product is good!